Recommended Tow Dolly for 2014 Ford Fusion

Published 10/11/2018

Products Featured in This Question

Roadmaster Tow Dolly with Electric Brakes - 4,250 lbs

(10)

$3525.00

Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End

(180)

$6.88

Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End

(728)

$8.49

Question:

Thanks Kyle, it looks like we would tow the 2014 front wheel drive Fusion. What parts are needed with as tow dolly?

asked by: Chuck

Helpful Expert Reply:

Which vehicle are you asking about towing, a Fusion or the F-250?

expert reply by: Kyle S

click to enlarge

Chuck

10/11/2018

Both, trying to decide which can be towed and how. Thanks

Kyle S.

10/11/2018

I took a look at the owner's manuals for both the 2014 Ford Fusion and 2006 Ford F-250. The F-250, if it is a 2WD can only be flat towed if you have the driveshaft disconnected and if you have a 4WD it needs to have a manual shift transfer case, an electronic shifter must use a trailer. For your '14 Ford Fusion it cannot be flat towed at all, but can use a dolly so long as it is a front-wheel drive model; if your '14 Fusion is all-wheel drive it must to towed on a trailer. If you let me know what model you have I would be happy to point you in the direction of the appropriate parts.

Chuck

10/11/2018

Thanks Kyle, it looks like we would tow the 2014 front wheel drive Fusion. What parts are needed with as tow dolly?

Kyle S.

10/11/2018

To tow your 2014 Ford Fusion you will need a tow dolly as you mentioned and I highly recommend the Roadmaster Tow Dolly # RM-2050-1 because it comes with electric brakes and a platform that swivels for when you need to make those sharper turns; this allows the dolly to more easily stay in line with your motorhome. You will need need to add any parts to your Fusion and the only other thing you will need is a connector for the dolly so you can activate its electric brakes. The connector you need will depend on what you have on your motorhome which is likely going to be a 6-pole or 7-pole. For a 6-pole you will need the Pollak 6-Pole Connector # PK11604 and for a 7-pole you will need the Pollak 7-Pole Trailer Connector # PK12706. These connectors will allow you to utilize the lights and electric brakes on the dolly. If you take a look at the cutout of the dolly's instructions (which are also linked) you can see the wiring on the dolly is color coded so you only need to follow that to wire up your connector. I have added links to video reviews of the dolly and connectors as well as a help article on trailer wiring for you to check out.