Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling serious weight, you want a wheel that’s up for the job. The Dexstar Steel Mini Mod Trailer Wheel is rated for 2,860 lbs and built tough with a 15" diameter x 6" wide rim. It’s made to match Load Range E trailer tires and uses a standard 1/2"-20 wheel bolt size for a secure fit. That kind of strength gives peace of mind whether you’re loaded to capacity or making long highway runs.
Rust and corrosion are real issues over time, especially on gear that sees road grime and wet conditions. This wheel’s two-step finish—an e-coat primer topped by a black powder coat—keeps metal protected and looking sharp season after season. The modular steel design adds strength while keeping the look clean and functional.
Nobody wants to guess when it comes to fitment. This wheel uses a common 6 on 5-1/2 bolt pattern, a 4.27" pilot diameter, and zero offset for easy compatibility with standard trailer hubs. Everything lines up just like it should, so you can mount it and go without hassle.
Every Dexstar wheel meets Department of Transportation standards, so you know it’s been tested and approved for highway use. Pair that with the precise specs—15" x 6" rim dimensions, 0 offset, and a strong modular design—and you’ve got a wheel that performs reliably mile after mile.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Dexstar 15 inch by six inch black modular steel trailer wheel with the six on five-and-a-half inch bolt pattern. Now this is a sturdy steel construction and we mentioned it is the modular design. When we say modular, that's the one that has the round holes all the way around the wheel. This is excellent corrosion resistance 'cause they do a two step finishing process, which will include first an E-Coat primer and then a black powder coat finish over it. This is a high quality wheel.
It does meet the DOT Department of Transportation specifications. Now if you notice the center cap is not included. If you do want a center cap, we do sell those separately on the website. You do wanna make sure to get a center cap that'll have the same diameter as this pilot hole right here. The diameter on this pilot hole is 4.27 inches.
And when you install your center cap, it'll go through this hole. A few dimensions we're gonna measure is the diameter and the width. And when you measure the diameter, what you're measuring is inside to inside. So in other words, the tire bead seat to bead seat. So basically if we put our tape measure on this, you'll be able to see there's your 15 inch diameter.
And the width will be the same way. You're gonna measure inside to inside or bead seat to bead seat. And there's your six inch width. Now the bolt pattern on this we mentioned is a six on five-and-a-half inch bolt pattern. And if you wanna measure that on a wheel that's an even number of lugs, it's pretty easy because if you notice the lug holes are directly across from each other.
So all you have to do is pick any one of the holes, let's say this one, and you'll measure from the center of this hole directly across to the center of the hole right across from it. On this wheel, it'll measure five-and-a-half inches. So that's telling it's a six lug five-and-a-half inch bolt pattern. Does use a wheel lug size of a half inch by 20, and the weight capacity on this wheel is 2,860 pounds. But that's gonna do it for a look at this Dexstar 15 inch by six inch black modular steel trailer wheel with the six on five-and-a-half inch bolt pattern.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Douglas
9/20/2024
After 1 year I stand by my word...great product and quality.
Daniel
5/16/2022
Great, only issue was long wait time to ship even when it was in stock.
Nick
1/22/2021
Good service great products
Jay
6/21/2020
Still look good working good
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
7/12/2022
Those valve stems are meant to be used with tires that would have a PSI of over 100. The valve stems that would work for you would be part # AM20903 that works with tires up to 65 PSI or part # AM20904 that works with tires up to 80 PSI.