Dual-handle plastic faucet has a D-spud outlet to attach a handheld shower set (sold separately) and a diverter pin to activate it. Washerless cartridges reduce friction for a long life. 2-Hole installation.
Features:
Specs:
The D-spud outlet on this faucet lets you attach a handheld shower set (sold separately). Once the shower has been connected to the faucet, it can be activated by lifting the diverter pin up.
This faucet lets you upgrade the bathroom faucet in your RV or camper. Using the standard NPSM inlet shanks, drop the new faucet and deck plate in place through the mounting holes of your existing faucet. Then hand-tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. The use of tub and tile caulk (not included) is required.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix Faucets, 4 inch dual handle RV bathroom diverter faucet. This unit's going to add or replace a diverter faucet in your RV. It's a lead free design. It's going to feature the dual acrylic lever handles. Gives the unit a really nice look. That's going to feature a quarter turn design, very easy to operate.
They have the H and C on there, which is going to indicate hot and cold. Here on top we're going to have the D Spud outlet for attaching the handheld shower. The handheld shower is not included, those are sold separately and can be found here at etrailer.com. When you're ready to use the shower, all you have to do is lift up on the spout lift rod to divert water flow from the main spout to the shower head. The unit is designed to prevent water back flow, which is going to help prevent contamination of your fresh water supply. It's made from a strong and durable plastic construction. It's going to feature a really nice looking chrome finish.
It does have a low flow aerator on it. That is this component right here, that's already installed. That's going to have a flow rate of 2.2 gallons per minute. The mounting area does require 2 holes for your installation. These connection points right here are the connections for the hot and cold water lines.
These are going to be separated on center by about 4 inches. They're going to have a length measurement of right around 2 inches long. They're going to give us an outer diameter of 13 1/16's of an inch, with an inner diameter of a half inch. Then that D Spud connection point, that's going to have an outer diameter of 13 1/16th's of an inch. We're going to take a few measurements, starting with just the base. That's going to give us a depth measurement of about 2 and 1/8th of an inch.
Measuring edge to edge, the unit's going to give us a length measurement of about 6 and 1/4 inches. If we take a height measurement from the mounting surface, we can see that that's going to give us a measurement of just over 3inches, maybe 3 and 1/8th, from the mounting surface to the tallest point of the unit. Measuring the overall depth from the back of the base to the furthest out point, we can see that's going to measure just over 5 inches, maybe 5 and 1/4 inches, right in that area. Then the water outlet height, measuring from the mounting surface. Measuring from this point right here, mounting surface to the closest point of the low flow aerator, that's going to give us a measurement of about an inch and a 1/4. Pretty simple installation. Again, it's going to require 2 mount holes. Those holes need to have a diameter of 1 inch, separated on center by 4 inches. It's going to come with that nice backing plate. That's a one piece design, and it's going to come with the threaded mounting nuts. It does include detailed installation instructions. These are designed to walk you through the installation process step by step. They've got nice detailed diagrams there to help you with that. On this side it's going to go over some operating instructions and some helpful hints. Then on the backside it's going to have a detailed breakdown of the parts list. That's going to do it for today's look at the Phoenix Faucets 4 inch dual handle RV bathroom diverter faucet.
Average Customer Rating: 4.7 out of 5 stars (421 Customer Reviews)
Dual-handle plastic faucet has a D-spud outlet to attach a handheld shower set (sold separately) and a diverter pin to activate it. Washerless cartridges reduce friction for a long life. 2-Hole installation.The Phoenic Catalina RV Bathroom Faucet w/D-Spud Dual lever handle arrived today just in time for our next trip. The unit was easy to install and needed no tools. Every nut was hand tightened. I tested the function of the diverter and it worked. There were no leaks as well. I like the handles for the hot and cold. The old unit's handles were confusing as to whether the water was on or off. The Phoenix's handles provide no doubt.
This faucet will dress up the bathroom very well.
Looks great right out of the box. Installed very easily in my RV trailer lavatory sink. No leaks. Love the 1/4 turn handles. Great product at a reasonable price. Considering a matching faucet assembly for the kitchen sink.
Works and looks good and is much nicer than the original one. This setup with the separate diverter control works a lot better than the ones which just have the hose connected to the diverter which you just pull up.
I purchased this faucet for a boat bathroom and it fit the existing holes perfectly, no adjustments needed. The shower handle fit easily onto the diverter. The product is plastic but has a great chrome look and functions as needed.
they fit right in and work great
Prompt shipping and great product to replace faulty diverter shower faucet in my Lance truck camper. Thank You.
Just what I was looking for and a good price.
It works really great thank you for your services
Fast shipping--smooth transaction-- Tha nks
Fast delivery. Part fit and worked perfectly! Would order from here again!
Review from a similar Shower Diverter Valve in RV Faucets
We ordered a bronze faucet with a shower diverter. I had a hard time finding an oil rubbed bronze faucet that I liked. We've slowly been updating our fixtures, and this was a great choice! Good price, fast shipping. Very satisfied! Not the first time we've ordered from etrailer, and they'll be our go to for replacement parts.
Review from a similar Shower Diverter Valve in RV Faucets
I originally bought a cheaper shower faucet from etrailer, but it was so unbelievably cheesy that I sent it back and bought this one. This has a brass valve body instead of plastic like the first one. I reversed the valve caps (hot and cold) so I could point the hose bib down which worked better for my setup. The valves are kind of rubbery feeling instead of a solid shutoff but it works.
Review from a similar Shower Diverter Valve in RV Faucets
I love, love, love the look of this shower faucet. You need to buy a separate shower head and hose kit. It really updates the look of our shower! It did take some work to install and a trip to a local RV store, but looks amazing and works great!
Dawn - 10/23/2020Review from a similar Shower Diverter Valve in RV Faucets
I do like the quarter turn version of the knobs - much easier to set the right shower temperature without wasting a lot of water. I also think the separate diverter control will last longer than one that is combined with the shower hose. Looks nice. etrailer is the best - fantastic communication
Byron I - 11/11/2021Review from a similar Shower Diverter Valve in RV Faucets
We recieved this product yesterday and just installed it. I cannot comment on its longevity due to that, but after using it, I gotta say it is a definite improvement to the factory install in our camper, both in looks AND function. Also, we upgraded our shower head to Oxygenics Body Spa and the brushed nickel of this faucet matches the brushed nickel shower head PERFECTLY! Very happy with this.
Review from a similar Shower Diverter Valve in RV Faucets
This faucet with shower attachment has a dedicated knob to divert water to to shower head. I've tried others where you pull up on the shower hose and it just leaked. This is better choice.
Review from a similar Shower Diverter Valve in RV Faucets
I just received this faucet, I haven’t installed it yet but I can say the I am very pleased with the build quality, The solid brass valve components and chromed metal valve cover are solid. Clearly this product is worth the small extra cost over the cheep plastic construction you find supplied with the typical factory OEM replacements. This is going to be used to replace a valve for my outside shower / wash down bay and I did not want to worry about temperature extremes that are present in this location. I can tell this valve assembly is going to work just fine. I also want to give 5 stars for the very quick order turnaround and shipping. It has been difficult for many retailers to provide this level of service to considering the logistic and supply issues facing businesses in 2021. Clearly etrailer.com is on their game.
Review from a similar Shower Diverter Valve in RV Faucets
Thanks for shipping usps to Canada. Item arrived within pre set delivery date. Item tracking was EXCELLENT. Would order from etrailer again. No customs or brokerage charges.
Review from a similar Shower Diverter Valve in RV Faucets
I tried a cheaper plastic sink faucet with a D spud. It squirted water every time the spud was moved. So I bought this one which is solid brass. So now the shower has its own separate faucet, works great, no leaks.
DP - 08/09/2021Do you have a question about this RV Faucet?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.