This 15" diameter x 6" wide steel trailer wheel has a 6 on 5-1/2 bolt pattern and a 4.27" pilot diameter. Rust resistant black powder coat finish.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Dexstar 15 inch by six inch black spoke steel trailer wheel, with a six on five and a half inch bolt pattern. Now this wheel is a nice sturdy steel construction. As we mentioned, it's an eight spoke design wheel. It does offer excellent corrosion resistance, 'cause they use a two step finishing process on the wheel, which will include first an eco primer and then a black powder coat finish over that. This is a high quality wheel.
Does meet the DOT, Department of Transportation specifications. Now one thing, if you notice this wheel does not come with a center cap. If you do want a center cap, we do sell those separate on our website. You do wanna make sure to get a center cap that'll have the same diameter as this pilot hole right here, 'cause when you install your center cap, it goes through this hole. Diameter on this pilot hole is 4.27 inches.
This wheel is made in the USA. A few measurements I wanna give you on this wheel. The diameter which will be measured inside to inside. So if we go inside to inside, there's your 15 inch diameter. The width will be the same way.
It's measured inside to inside or bead seat to bead seat. There's your six inch width, and the bolt pattern on this wheel is a six on five and a half inch bolt pattern. And if you wanna measure that on a wheel, that's an even number of lugs. Like in this case, six. It's pretty easy because if you notice the lug holes, they are directly across from each other.
So when you go to measure, it's pretty easy. You just pick any hole, let's say this one, and you'll measure from the center of this hole directly across to the center of the hole right across from it. It'll measure five and a half inches on this wheel. So that's a six lug five and a half inch bolt pattern. Does use a wheel lug size of a half inch by 20, and the weight capacity on this wheel is 2,860 pounds. But that's gonna do it for the review on this Dexstar 15 inch by six inch black spoke steel trailer wheel at the six on five and a half inch bolt pattern.
Fit and made my trailer look newer
Shipped quickly, completely satisfied.
Good Product. I would buy again
Excellent - once again. THANK YOU!!
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.