bing tracking image
  1. Trailer Suspension Parts
  2. TruRyde
  3. Shackle Links
  4. Camper
  5. Car Hauler
  6. Utility Trailer
Shackle Strap - 3-1/2" Long
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
TruRyde

Shackle Strap - 3-1/2" Long

Part Number: TRSL350
In Stock
$11.98
Trailer Suspension Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
3-1/2" Long shackle link connects double-eye leaf spring to the rear hanger or equalizer on trailer suspension systems. Shackling the 2 components together instead of bolting them directly allows for the necessary pivot of the springs. Great Prices for the best trailer suspension parts from TruRyde. Shackle Strap - 3-1/2" Long part number TRSL350 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (524)
  • Q & A (0)
  • Videos (1)
  • Photos

TruRyde Trailer Suspension Parts - TRSL350

Highlights

  • 3-1/2" Center-to-Center Length: Connects double-eye spring to hanger or equalizer for proper pivot.
  • 9/16" Bolt Holes: Matches common suspension hardware for secure and accurate fit.
  • 1/4" Thick Steel Strap: Durable link that handles suspension movement without bending or wear.
  • 4-3/4" Overall Length x 1-1/4" Wide: Sized for stable alignment of trailer suspension parts.
  • Even Load Distribution: Allows equalizer movement to share weight across trailer axles.
  • Sold Individually: Replace only the straps you need for a clean, consistent rebuild.

Features to know about

Smooth Suspension Movement: 3-1/2" Center-to-Center Length Keeps Springs Pivoting Right

A stiff or binding suspension can make towing rough. This TruRyde 3-1/2" long shackle strap connects the double-eye leaf spring to the rear hanger or equalizer so the system can pivot the way it’s meant to. That movement helps keep load forces balanced and ride quality consistent, preventing uneven stress between axles.

Durable Fit and Proper Alignment: 9/16" Bolt Holes Hold Tight Without Binding

Getting the right geometry is key to smooth suspension travel. The 9/16" bolt holes on this strap are precisely sized for common trailer suspension hardware, giving a snug but free-moving fit. It prevents excess play while still allowing the equalizer and springs to flex naturally on bumps and turns.

Built to Last Under Load: 1/4" Thick Steel Handles Constant Motion

Shackle straps take a beating every mile, so solid construction matters. At 1/4" thick, this TruRyde link resists bending and wear from repeated articulation. It’s tough enough to stay straight under heavy load cycles without elongating or cracking over time.

Sized Right for Straightforward Replacement: 4-3/4" Overall Length x 1-1/4" Wide

When it’s time to swap worn shackles, matching dimensions ensures everything lines up perfectly. Measuring 4-3/4" overall length and 1-1/4" wide, this strap drops in as a dependable replacement that restores correct spacing and motion in your trailer suspension system.

Specs

Dimensions

  • Length: 3-1/2" from center of hole to center of hole
  • Overall dimensions: 4-3/4" long x 1-1/4" wide
  • Bolt hole diameter: 9/16"
  • Thickness: 1/4"

Dimensional diagram of TruRyde shackle strap TRSL350 showing 3-1/2-inch center-to-center length, 4-3/4-inch overall length, and 9/16-inch bolt hole diameter for trailer suspension connections.






Video of Shackle Strap - 3-1/2" Long
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for An In-Depth Look at the Shackle Strap

Hi everybody. Andy here with etrailer.com. Let's take a brief look at this shackle strap. Now, this three and a half inch long shackle strap is going to connect your double eye spring to your rear hangar of your single axle trailer or your equalizer on your multiaxial trailer. This connection, as you no doubt know, is going to allow movement to take place, ensuring an evenly distributed load between the axles. This is made of durable steel and shackle.

strap lengths are measured from the center of one bolt hole to the center of the other. So lining up my ruler here, as you can see on center, we're sitting right at three and a half inches, center to center, and that bolt hole diameter is 9 16ths of an inch. And if you're interested, the overall length of our strap is right at four and three quarters inches long, edge to edge, and then the overall width, we're sitting at one and a quarter inches. Well, that's gonna wrap up our real quick look today. I do hope that it was helpful for you.

Again, my name is Andy, thank you for joining me.

Customer Satisfaction Score:

Ratings & Reviews

4.8

524 reviews
Review sort icon
3-1/2" Long shackle link connects double-eye leaf spring to the rear hanger or equalizer on trailer suspension systems. Shackling the 2 components together instead of bolting them directly allows for the necessary pivot of the springs.

by:

High quality shackle straps would buy from again also fast shipping and great customer service



by:

what would be a great help for this "senile citizen" is a reminder that pops up on this item and says "are you sure you want just ONE pair ??? usually TWO pair are purchased for a single axle trailer" .. oh well I can just go down the road with a trailer that has a slight list to one side :-) all kidding aside, the item looks sturdy and well made, great price !



by:

Hello etrailer; Previously I mistakenly ordered the wrong size. I called and CAROL C. found the correct item in a matter of minutes and followed thru with getting it shipped that same afternoon. Thank you Carol for your professionalism and knowledge of products. [ ]



by:

No problems. All four were made to good tolerances. Much heavier than the one I took off the trailer.

John L. profile picture

John L.

7/2/2014

Product has held up well, no problems at the one year mark.



by:

Bought these to raise the trailer a touch. Easy to install. Fast shipping & response. Also bought new bolts 7 locknuts. Bought new bushings just in case but didn't need them. Well satisfied with my purchase.



by:

The spring shackles that I ordered from Etrailer a year ago are holding up just fine and have met my epectations



by:

Etrailer.com has made the repair of my trailer very easy for me by supplying me with high quality parts at reasonable prices. They packaged the parts carefully and shipped quickly. I will no longer look anywhere else when I need trailer parts. This is a one stop and shop great place to do business. Thank You Etrailer, Dave



by:

Thought these might work but too short for the intended application. I needed a longer shackle to improve the clearance for the tire from the fender wheel well.



by:

This worked perfectly as I needed an additional inch of clearance between my fender and tire.

My fender was not able to be moved higher and I didn't want the height that an axle spring flip creates.

My old straps were just over 2" and this gave my exactly one inch of rise.



by:

Good value for the price. Started rusting within days of installation so take the time to rattle can if you hate rust like I do!

Sierra K. profile picture

Sierra K.

12/30/2021

I have attached a rust prevention help article with some tips in it:



by:

Great product, work like a champ. Excellent machining standards allowed for easy install. End result is more clearance in the wheel well.

Kelly profile picture

Kelly

1/1/2018

Work great, hauled many heavy loads with no issues . Recommend



by:

To me a shackle is made of 2 pieces. It is unusable with only 1 piece. $X.XX for half a shackle is overpriced, then they add insult to injury by charging $5 shipping.

Jenny N. profile picture

Jenny N.

5/24/2023

Our manufacturers have typically sold the shackle straps as single straps unless they are part of a specialized kit. I was not sure what the second piece would be that you are looking for? Would it be a shackle bolt like part # 166081?



by:

Needed to raise my frame on a pontoon trailer for a little more tire to fender clearance. Going from a 2" shackle strap to this 3 1/2" worked perfect. Good quality and shipped fast.



by:

Even with the product taking almost a month to arrive I gave Etrailer 5 stars... UPS lost my package and never admitted to it saying that it was USPS’s fault. Karen, at Etrailer, was very helpful with contacting UPS to try and figure out what happened, and ultimately re-shipping the items. After they arrived, they bolted directly to my existing enclosed trailer with no problem. Thanks again Karen!



by:

It fit perfectly but it actually used it for a shackle on a hit rod I’m building . That car is a sebring 3000 mx with pinto leaf springs. Just so happens the shackle strap fit the shackle perfectly.when you build a hot rod you always open your mind to found what works. A trailer part on a car made sense .



by:

The old and new. Got over 12 years from the first ones.



by:

These are very solid steel. But I didn't order them to use as spring shackles, but for steel straps such as for the bottom side of a U bolt. I also needed to replace a tongue jack mounting bracket but didn't want to buy an entire mounting kit (as suggested by an etrailer "expert") so I used this instead. You can see by the attached photo that they do a better job of mounting the tongue jack by not hanging down below the trailer tongue as the factory brackets do. But they do need to be painted--which is no problem since the zinc coated ones would also need paint eventually (unless you don't mind the rust). I bought several in various sizes for mounting stuff to my trailer tongues and for other projects.



by:

I wish the shackle bolts came out as easy as ordering the parts!!!!
Jean at etrailer made it simple,answered all my questions and advised on some other items I would need to complete the job.
The parts arrived quick and everything was there. The shackle straps were heavy duty not light metal junk. The bolts and springs were also of the same quality.
Etrailer is trailers I highly recommend them you won't be disappointed.
Thanks again Jean.
Paul S

Paul S. profile picture

Paul S.

7/5/2015

So far so good never realized my old springs were so bad till I installed Etrailers parts.Thanks again, Paul S



by:

I can't say enough good things about the product or service. The order was shipped within a couple of hours of being placed and arrived 3 days early. This was important because I was stranded far from home. The sales help was great. The new leaf springs really improved how the trailer feels on the road. The picture is of my sheep wagon trailer at my hideaway in New Mexico after driving 1900 miles including highway speeds of 75 mph as well as crawling up jeep trails in four wheel low, the new springs took it all in stride.

Dave H. profile picture

Dave H.

4/23/2015

No problems at all. Since I last commented I have taken it to California, numerous trips around California, to Idaho and back. I spend a lot of time on washboard gravel and dirt roads. Last week I had the tires replace and the springs looked perfect.



by:

Purchased replacement springs, equalizers, shackles and all the needed hardware to put it all together for my tandem axle boat trailer. While I was trying to figure out all the parts I needed on-line, I made a couple calls to etrailer's customer service and they were awesome! Parts arrived quickly and are exactly what I needed. I put together one of the spring / equalizer / spring set-ups and placed it on the trailer frame to confirm fit. Perfect! Looking forward to swapping all the parts out this weekend. And I'll be shopping with etrailer again soon to get a trailer hitch for my new Durango!
Thanks etrailer!



by:

Everything was what was expected and the delivery was on time. I will always look to etrailer for my trailer parts. I built a trailer from scratch and it was etrailer that helped build it.



by:

Exactly as described.



by:

Good quality, fair price



by:

I was a little unsure about this one. But it was a direct fit. The measurements on the site were very helpful. Not bad for the price.



by:

The shackle and bolts fixed my problem .Original shackle had pointed or right angle corner and the trailer hung up.
The new shackle had a radius corner and didn't catch the frame.
Works great


25
25

See what our Experts say about this TruRyde Trailer Suspension Parts

  • How to Gain Ground Clearance for a Travel Trailer that Hits the Driveway When Entering or Leaving
    There are a couple different ways to raise the ride height of your trailer, but before we choose the best option for you, we will want to take a look at a few things. First, it sounds like you are not towing with your trailer level so you do not hit your ball mount on the driveway. A trailer that is not level can create many problems such as ground clearance and trailer sway. If you have any sway control issues with your trailer, then I would recommend moving your leaf springs above your...
    view full answer...
  • Availability Of Suspension Kit With 3-1/2" Long Shackle Links
    Hello Lance, thanks for reaching out. When replacing shackle straps and equalizers, the replacement parts must be identical in size to the original. Since your current shackles are 3.5" long, you will NOT be able to use the 2-1/4" shackles that come with the # K71-449-00 kit. There is a small amount of tolerance, like 1/2" or less, but a 1-1/4" difference is way too much and this would throw your suspension out of alignment. We do have parts that will still work for you. We have a 3.5"...
    view full answer...
  • Is 1/4 Inch Height Difference Okay For Use With E-Z Flex Equalizers
    Hi Sam, Good question, and the mere 1/4 inch difference in the height is not going to have any type of negative effect on your trailer so you can 100 percent use the E-Z Flex Equalizers # K71-655-00. These are a smart choice as they'll make a nice difference in how your trailer rides due to its rubber cores absorbing bounce and shock.
    view full answer...
  • Switching from Standard Equalizers to Road Armor Kit and Recommended Shackles + Bushings
    You will be able to use the Road Armor Shock Absorbing Equalizers since they're fairly close in dimensions (6" wide x 3-1/4"). I recommend pairing these equalizers with the Never Fail Tandem Axle Suspension Kit # LC281285 which comes with 2 different lengths of shackle straps (3-1/2" and 4-3/8" bolt hole to bolt hole) to accommodate for the change in height, new bolts and bushings for your springs. One of the great things about this kit, aside from it being high quality and durable, is...
    view full answer...
    Image 1 for
  • Replacement Shackle for Lippert Equa-Flex on 2017 Grand Design Reflection 30BH
    Hi Eric; we have one shackle that matches your 3-1/2" measurement which is the # TRSL350. However, looking at the Grand Design parts site it looks like the standard 3-1/8" was used on your trailer so I would double check unless you've changed them out for some reason. For a 3-1/8" replacement shackle you can use the # TRSL313. You might also want to consider changing everything over to heavy duty shackles using the MORryde Suspension Upgrade Kit # MR76ZR. This kit comes with wet bolts,...
    view full answer...
  • Recommended Replacement Equalizers and Shackle Straps for a 2015 Grand Design Reflection
    Hey John, thanks for all the info and pictures. I took a look at what you have and think the Dexter E-Z Flex Suspension Kit # K71-652-00. These are a bit larger than what you have now, but they'll still work fine. These equalizers also come with upgraded bronze bushings, wet bolts, nuts and shackle straps, but the shackle straps are too short so you'd need # TRSL350 instead. If you decide that you do want something to help with camper sway and electric brakes, come on back and we can get...
    view full answer...
  • Raising Trailer Suspension To Clear Rear Leaf Spring From Hitting The Crossmember
    It appears you may have installed shackle straps which are longer than what you may have had. It appears your straps are either 3-1/8" # TRSL313 or 3-1/2" # TRSL350 and you likely only need a 2-1/4" # TRSL225. This would move the mounting point closer to the axle and raise the trailer approximately 1/2". To get enough height to clear your crossmember you will likely need the Lift Kit # RR23QX. This will allow you to raise the suspension either 1-1/4" or 2-1/4" to clear your rear crossmember. On...
    view full answer...
    Image 1 for Image 2 for
  • Can Trailer With Existing 3-1/2" Shackle Straps Use 2-5/16" Shackle Straps From Equalizer Kit
    Switching the shackle straps on your 2015 Big Tex 60CH would not be a good idea, especially since you would be using a significantly shorter size. In general, you want to keep the same length since swapping them out will change the suspension geometry and cause problems. Sometimes you need to use a longer shackle if you get a tall equalizer but I'm sure that doesn't apply here. Assuming you truly have 3-1/2" shackle straps you aren't going to find a kit with those since they aren't a...
    view full answer...
  • What to do if Trailer Shackles are Flipping
    Generally the issue when shackles flip when hauling empty is that they are too short. So I recommend measuring them from center hole to center hole and assuming they are less than 3 inches, replacing them with longer ones, the 3-1/8" Shackle Strap # TRSL313 or 3-1/2" Shackle Strap # TRSL350.
    view full answer...
  • Will Adding the Lippert Road Armor Raise My Trailer to an Unsafe Height
    We've seen a lot of our neighbors raise their trailer considerably more than 1/2" without adversely affecting handling on their trailers; many of them use spacer blocks or axle flip kits to gain as much as 4 to 4-1/2" of additional clearance. As long as your trailer tows level with your truck, I don't believe that extra 1/2" of height will have the negative effects you might expect. When it comes to adding the Lippert Road Armor # LC696740 to your 2021 Venture Sporttrek 327VIK, these are...
    view full answer...
  • Shackle Straps Are Flipping on Tandem Axle Trailer
    Shackle links can flip when the trailer is unloaded since there isn't enough weight to keep them in proper position, and while a new, shorter equalizer may help, the easiest thing to check is the shackle links. Shackles that are too short can cause them to flip, so the best thing to check first is the length of your shackles, and replace them with longer ones if possible. You'll want to measure from center to center of the bolt holes to check their length, and replace them with one of...
    view full answer...
  • How Many Shackle Straps For Single Axle Trailer
    The Shackle Strap part # TRSL350 comes as a single strap. There should be 2 shackle straps per spring on a single axle trailer. You would need to order 4 of the part # TRSL350 for a single axle.
    view full answer...
    Image 1 for
  • Correct Positioning of Shackle Strap
    There is no set angle, but you want to leave enough room for the suspension to articulate. By looking at the photo, you will indeed need to move the rear hanger back a bit. The shackle strap be much closer to vertical, as shown in the diagram provided.
    view full answer...
    Image 1 for
  • Replacement Equalizer, Shackles and Wet Bolts for 20 Foot Trailer with 7-3/4 Inch Wide Equalizer
    I have a solution for you, but the Dexter # K71-359-00 is not going to be a fit since the equalizer is only 5-3/4" wide. You could use the Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 3-1/8" Links # e99ZR, which has the correct size equalizer but does not come with wet bolts and the shackle are also slightly shorter than your 3-1/2" shackles; the shackle length won't be an issue since shackles can stretch over time but if you wanted a wet bolt kit it would...
    view full answer...
  • Are Shackles Supposed To Move Freely and Can They Flip The Wrong Way
    The shackles on suspension systems like part # TRSL350 are designed to be fairly loose because the equalizer on your trailer suspension needs to be able to move without binding. The best thing to do when tightening down shackle bolts is to use lock nuts, tighten them until they are snug, then back them off 1/4 turn. It is possible that the shackle can flip into the wrong direction however most of the time putting weight on the trailer is enough to correct it or you can jack up the trailer...
    view full answer...
  • Recommended Ways To Raise Height Of Small 4 X 8 utility Trailer
    Since you do not want to use an over/under kit on your axle, the best way to raise the trailer would be to use longer hangers for the leaf springs. You may be able to use a hanger like part # E4139. This hanger is designed for double-eye springs and is 4-1/4 inches tall. The old hangers will need to be cut off and the replacement hangers welded on by a professional. I have attached a link to our product page for the trailer hangers we offer you can check out. If your axle measures 2-3/8...
    view full answer...
  • How To Deal With Axle U-Bolts Making Contact With The Frame Of A Trailer
    One thing I recommend doing right off the bat is adding the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00. This will flip the axle to under the springs and will solve the issue of the U-Bolts making contact with the frame of your trailer. As to the shackles flipping, I think it may actually be a center hanger height issue along with the shackle straps being a little short. If you take a look at the Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt...
    view full answer...
    Image 1 for
  • Troubleshooting Shackle Straps That Keep Flipping Down
    Hey Joe, If your shackle straps are too short and there isn't enough weight on the trailer the shackle straps can flip down as you run over bumps in the road. Increasing to a 3-1/8" long # TRSL313 or 3-1/2" long # TRSL350 shackle strap size could help bring the leaf springs up towards the center a bit more and prevent the axles from dropping. Your hanger spacing is fine so I'm curious to see how wide the shackle straps sit outwards when the axles are sitting properly. If you'd like to...
    view full answer...
  • How to Gain Trailer Ground Clearance
    There are ways to increase ground clearance on a trailer, but you can't flip the shackles to do that. You can do this by moving the axles from being above the leaf springs to below the leaf springs. The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under...
    view full answer...
  • Recommendation For Keeping Shackles From Flipping Up On Uneven Terrain
    Longer hangers will not prevent the shackles from flipping. If this has always happened or if the springs are new then they are too short. If it happens only when your trailer is empty then not enough weight/tension to keep shackles in place so they flip. This happens normally when the trailer is unloaded. If this is a new/recent occurrence then something-shackle straps, equalizer holes, etc- has worn out and needs to replaced. If it's a shackle issue, you will need to measure from...
    view full answer...
  • Measurements of CE Smith U-Bolt CE15260A
    I went out to the warehouse and pulled u-bolt # CE15260A to measure it. The inside width is 3-1/2 inches. The center to center width is 3-7/8 inches. And the outer width is 4-1/4 inches. The inside height is 6 inches. The overall height is 6-3/8 inches. The shackle link # TRSL350 would not work because the hole spacing is too short at 3-1/2 inches. You would have to either bore out the holes some or bend the u-bolt to fit. We do not have a specific plate that would work or that has the...
    view full answer...
    Image 1 for
  • Replacement Trailer Springs and Shackle Straps for EZ Loader Boat Trailer
    We carry 4 double-eye springs that are 26 inches long. I've linked our selection for you to check them out and choose the weight capacity you need. Shackle straps that are 5-1/4 inches center on center is very long. The longest we carry is only 3-1/2 inches, part # TRSL350. I recommending replacing the ones you have with shorter straps.
    view full answer...
  • After Replacing Equalizers and Hangers on Triple Axle Trailer, Tires Are Rubbing
    The taller hangers are likely causing additional suspension travel which is causing the tires to rub. It is something that will need to be corrected. First, the new equalizers you installed are shorter than the originals. If you do not compensate for the shorter distance with either longer springs or shackle straps, that is likely the root cause of the problem. Also if you did not increase the hanger height equally for all hangers, then that will throw things off as well. You could keep...
    view full answer...
  • Should 2-1/4 Shackle Straps with New Suspension Kit be Used Instead of 3-1/2 Current Straps
    The 1/4" shorter equalizer in the Dexter Heavy-Duty Suspension Kit # K71-359-00 will be just fine but you are correct that you don't want to use shorter shackle straps as well. You can either reuse your old ones if they are in good shape or use the 3-1/2" Shackle Strap # TRSL350 instead. It would be a good idea to just use new straps since you are changing out suspension parts anyways.
    view full answer...


< Previous
12



Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Lindsey S
Written by:
Lindsey S
Employee Cole B
Installed by:
Cole B
Employee Andy C
Installed by:
Andy C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.