Brass Tire Sensors for TST TPMS - Qty 4

See what our Experts say about this TST Accessories and Parts

• What Batteries Does Brass Tire Sensors # TST-507-RV-S4 Use
  The batteries that are in the Brass Tire Sensors # TST-507-RV-S4 that you referenced are CR2032.
  view full answer...
• Recommended Tire Pressure Monitoring System with 12 Sensors
  The TST TPMS for RVs - Color Display - Signal Booster - 6 Tire Sensors # TST-507-RV-6-C are a great choice for your Class A and trailer. This company actually started out making TPMS for tractor trailers, so these are extremely durable and I really like the color monitor on the system since it's easy to read. Because of the length of the two vehicles I do recommend adding the Signal Booster # TST-507-R. Since the kit comes with 6 sensors you will need 6 more which can be added with #...
  view full answer...
• Can Additional Sensors Be Added To TST 507 TPMS System?
  Yes, you can add the Brass Tire Sensors # TST-507-RV-S4 to your TST TPMS # TST-507-RV-4-C to be able to also monitor the tires on your truck. The TST 507 is capable of monitoring up to 38 tires so you will be able to use it with multiple vehicles and trailers. We do also have the Internal Tire Sensor # TST-507-INT-S1 if you are concerned with the other sensor from being stolen.
  view full answer...
• What is Difference Between TST Tire Pressure Monitor Systems # TST-507-FT-4 and # TST-507-FT-4-C
  The two kits you mentioned are basically the exact same with exception being the color of the display. The # TST-507-FT-4-C has the color display that puts the alert messages in red if there's high or low pressure as well as temperature whereas the gray scale # TST-507-FT-4 would display everything in the same gray-like color. Either kit works great on rubber valve stems. For the second trailer you'd need additional sensors with # TST-507-RV-S4 and you'd be able to use it with the same...
  view full answer...
• Are Aftermarket TPMS Sensors Compatible With Factory In-Dash Monitors
  The TPMS (tire pressure monitoring systems) wheel sensors we offer, such as the # TST-507-RV-S4 you'd looked at would used their own monitors, and wouldn't be compatible with the factory in-dash monitor on a Ram truck. The sensors you'd looked at would be included with a kit like # TST-507-RV-6-C which would include 6 sensors, the color monitor and the signal booster. I've linked to a demonstration video featuring the # TST-507-RV-6-C TPMS system.
  view full answer...
• Adding A Trailer Tire Pressure Monitoring System To An Existing Motorhome System
  The # TST-507-FT-S2 will work though these cannot be used on rubber stems and you will have a higher chance of curbing because these stand out a bit. I did contact TST who recommended the Brass Tire Sensors for TST TPMS - Qty 4 # TST-507-RV-S4 as a better solution that addresses those concerns. Either will work for you but I wanted to make sure you're aware of your options. Included are review videos for your review.
  view full answer...
• Can TST Flow Through Tire Sensors Replace Standard Sensors
  To replace the standard sensors of your TST TPMS for RVs # TST-507-RV-4-C you need the standard Brass Tire Sensors # TST-507-RV-S4, but you can absolutely upgrade your system to use the flow through tire sensors. I recommend doing this because you don't have to remove flow through sensors to add air to your tires, making it much easier. To add 4 of the flow-through sensors you need to order a quantity of 2 of the Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2. It sounds like...
  view full answer...
• Recommended Tire Pressure Monitor System for Double Towing
  If you are just wanting to monitor tires, then a Tire Pressure Monitoring System is the way to go. I recommend the TireMinder TPMS for RVs - LCD Monitor - Signal Booster - 4 Tire Sensors # TM-A1A-4. The monitor is able to support up to 22 tires. The TST TPMS for RVs - Color Display - Signal Booster - 4 Tire Sensors # TST-507-RV-4-C is a color monitor option that supports up to 38 tires. You can use the Brass Tire Sensors for TST TPMS - Qty 2 # TST-507-RV-S2 or the Brass Tire Sensors...
  view full answer...
• Recommended TPMS System for 40 Foot Long 5th Wheel Trailer Pulled by Long Bed Crew Cab Truck
  According to the folks at ASA Electronics, due to the combined length of your fifth wheel and truck the # NCTP100 iN-Command TPMS system wouldn't be the best choice for your setup. The system would work perfectly on your truck tires, but performance would be inconsistent for your 5th wheel, especially for the back axle. We do have a system that would work very well for you though. I'd recommend the # TST-507-RV-4-C from Truck Systems Technologies. This system provides 4 theft resistant...
  view full answer...
• Replacement Tire Sensors and Signal Booster For TST 507 Tire Pressure Monitoring System
  As you have the Monitor # TST-507-D-C you will simply need the Signal Booster # TST-507-R to go along with some new tire sensors. You do have the option of what sensors you will prefer to use from the list below. Brass Tire Sensors for TST TPMS - Qty 2 # TST-507-RV-S2 Brass Tire Sensors for TST TPMS - Qty 4 # TST-507-RV-S4 Flow Through Tire Sensors for TST TPMS - Qty 2 # TST-507-FT-S2 Internal Tire Sensor for TST TPMS Systems - Qty 1 # TST-507-INT-S1 These are the only sensors and quantities...
  view full answer...
• Will the TST-507-RV-6-C Work on an RV/Toad That is 68 ft Long Overall?
  I spoke with my contact over at Truck Systems about the TPMS for RVs # TST-507-RV-6-C and those TPMS sensors will work for your RV, but he mentioned that you would likely want to use the system that has the Flow-Through caps instead, which can be found with part # TST-507-FT-6-C . This is the same exact system with the color monitor, but the caps will allow you to fill your tires without removing the TPMS caps if the need arises. Since there is not a pack of 12 sensors available, you'll...
  view full answer...
• TST Tire Pressure Sensor with Color Display with 12 Total Sensors
  For a TST TPMS system with a total of 12 sensors you'd need the part # TST-507-FT-6-C for the color display setup with 6 sensors and then you'd need a quantity of 3 of the part # TST-507-FT-S2 which is a pair of sensors. The prices are available at the links below.
  view full answer...
• Recommended Tire Pressure and Temperature Monitoring System for 2018 Grand Design Solitude & Trailer
  For your 2018 Grand Design Solitude the factory temperature sensor for high temp is 158 degrees. This is based on the Michelin Standard for tire temperature. It is the same for all size tires. Usually a tire will not expand enough to blow until it reaches between 170 and 200 degrees. This alarm should give you enough time to pull over to let the tires cool down before there is a major issue like that. Although your tires will heat up at different rates, this is a fairly good place for...
  view full answer...
• Using TST TPMS on RV that Tows Honda CR-V or Trailer
  I reached out to my contact at TST regarding their TPMS systems for your particular application. First he said for your setup it will be best to mount the signal booster in the RV towards the back of the coach. He recommends going with the Color Display TPMS # TST-507-FT-6-C because it will allow for an easier setup to program it for both your Honda CRV and trailer. He said this can absolutely be done and after the initial programming it's just a matter of pushing a couple buttons when...
  view full answer...
• Compatibility Of TST TPMS Brass Tire Sensors On Rubber Valve Stems
  Yes, the Brass Tire Sensors # TST-507-RV-S4 and the sensors that come with the TST TPMS for RVs # TST-507-FT-6-C are compatible with your valve stems. These sensors are compatible with rubber(brass), steel, chrome, or nickel valve stems. They should not be used with aluminum valve stems as that will lead to damage of the sensor as the 2 metals are not compatible and will corrode each other.
  view full answer...
  
• Best TPMS for 2015 Tiffin Phaeton and Flat Towed 2014 Honda CRV
  I'd recommend a system from TST. Their # TST-507-RV-6-C TPMS system incudes 6 sensors, a signal booster and a color monitor. Extra sensors are available in a quantity of 2 as part # TST-507-RV-S2 or 4 as part # TST-507-RV-S4. The sensors provided are compatible with rubber, steel, chrome or nickel valve stems.
  view full answer...
• How To Add Additional Sensors to the TST TPMS for RVs TST-507
  In order to add TPMS sensors to your tow vehicle to use with the TST TPMS for RVs part # TST-507-RV-4-C you will also need the Brass Tire Sensors for TST TPMS part # TST-507-RV-S4. The only other thing I recommend for you is extra batteries, the Replacement CR1632 Batteries part # MRI-CR1632. The above will include everything that you need to get setup and hit the road.
  view full answer...
• Recommended TPMS Sensors For A Motorhome And A Flat Towed Jeep With Rubber Valve Stems
  The flow-through sensors included with the TST TPMS for RVs # TST-507-FT-6-C you were looking at are not compatible with rubber valve stems, and the sensors for rubber valve stems not compatible with this specific system so you would need to use kit # TST-507-RV-6-C and get an additional 4 sensors # TST-507-RV-S4 for your Jeep. Flow through sensors are definitely convenient but are heavier and can end up bending and damaging the rubber valve stems on your Jeep.
  view full answer...
• Is There a Correct Valve Stem Length For Installing TPMS System
  The 3/4" of valve stem that's exposed for your setup will be adequate to accommodate the flow through sensors found on the TST TPMS for RVs # TST-507-FT-6-C or the cap sensors found in the kit # TST-507-RV-S4. The manufacturer, TST, recommends installing their system on a metal valve stem like the part # AM20906 which measures 1-1/4" for what's exposed but aside from that they don't really have any guidelines on valve stem length. Really just as long as all of the threads for the valve...
  view full answer...
• TST Tire Pressure Monitor Sensors for a Ford F-450 Dually
  Regardless of whether you go with the cap style or flow through, they use the same monitor so you should be good to continue use with your current monitor. I would recommend sticking with the flow through sensors like the Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2 that you already have if they can fit your dually wheels. Since you already have some, you could remove them and test fit them first. Pretty much all valve stems have at least some rubber on them, more than likely...
  view full answer...

Do you have a question about this Accessories and Part?