Visibility makes all the difference when you hit the road, and this TecNiq 6-1/2" oval stop, tail, and turn light makes sure your signals stand out. The all-red lens covers an 8-LED array that puts out a bright, even glow, so your stop and turn signals are clear no matter the time of day. It runs on 9–14V DC and only draws 0.12A–0.16A, which keeps power use low while staying brilliantly bright.
Dust, mud, or water won’t get in the way of your lighting. This light is fully sealed to an IP68 rating, making it dustproof and waterproof with a hermetic seal that stands up to real-world abuse. The TecSeal urethane potting fully protects the circuit board from moisture and vibration damage, so the LEDs keep working long after other lights fail.
No need to mess with complicated wiring or loose connections. The grommet mount design fits standard 6" oval openings for a clean, secure fit. A Tri-Pole connector makes hookup quick and reliable using just three wires—white for ground, red for stop/turn, and black for tail. Once installed, it sits flush and stays tight even after miles of vibration and weather changes.
This light is made from automotive-grade, UV-resistant polycarbonate that resists cracking and fading from sun or road debris. The impact-resistant lens protects the LED array inside while keeping the output clear and sharp for over 100,000 hours of operation. It’s designed to meet FMVSS 108 standards for both wide and narrow vehicles—proof it’s built for performance that lasts.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steven here with etrailer.com. Today we're looking at our TecNiq high visibility stop tail turn light. It does feature a six inch oval light and uses a tripole, wiring harness sold separately and a grommet mount sold separately as well. Now folks, as you can see, it's a red lens. Again, you would need to have a grommet already purchased and installed on your trailer, or you can purchase one separately here. And also it needs a tripole connector in the back.
And right now you can see I've got the, just the running lights wired. And then if you hit the brake lights, those are obviously brighter. So that's your differences in the power of the light intensities. And like I said, you would need a tripole connector for the back to plug in to the light. Again, folks, it's your standard six and a half wide overall or length rather, and three and, I'm sorry, yeah, three and a quarter inches that way.
And then about one and a half inches thick. I'm sorry, not three and a quarter, two and a quarter. Yeah, two and a quarter, six and a half overall. And again, about one inch thick on the actual lens itself and about one and a half if you count the connection part up there. So again, folks, as we know, LEDs last way longer than the incandescent ones, and this has been hermetic sealed for dust and waterproofing as well.
That will wrap it up for our quick look together. I'm Steven, thanks for watching.
Ratings & Reviews
You should let everyone know that is -1 I needed 2 I ordered tail lights and backup lights now I have 1 of each
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.