Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 2-15/16" round amber light puts out a bright, clean glow that stands out day or night. It uses five LEDs that last up to 50 times longer than old incandescent bulbs and draw just 0.063 amps at 12.8V. With no filaments to burn out, you get reliable performance season after season without swapping bulbs or worrying about dimming over time.
If your trailer ever sees rain or gets dunked at the ramp, this light is built to handle it. The housing and amber lens are sonically sealed into a single waterproof unit, keeping out water and grit that can ruin circuits. That sealed design protects the diodes and ensures consistent light output even after repeated submersion.
Bumpy terrain and vibration can destroy weak solder joints, but not here. This light’s surface-mount technology (SMT) LED circuit board is built to better withstand shock and improve heat distribution. That means the diodes stay cooler, connections stay solid, and the light just keeps working no matter how rough the ride gets.
Installing it is straightforward thanks to the integrated flange mount. The low-profile housing sits flush against the surface—no large holes needed in your trailer body. With 2-1/4" center-to-center mounting holes, it secures neatly in place for a clean, professional look that stays put even through vibration and weather exposure.

Visibility matters most when other drivers are trying to see your trailer in traffic or low light. This PC-rated light casts a full 180-degree beam so it can serve as both a clearance and side marker light when mounted correctly. That wide spread means other drivers can see you from the front, rear, or side—keeping your trailer visible and safe in every direction.



Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 2: Today we're taking a look at the Optronics LED Trailer Clearance or Side Marker Light. This low-profile trailer tail light functions as a clearance or a side marker light for your trailer. It's a sonically sealed waterproof housing and lens unit that is submersible. It features surface-mount technology when it comes to the construction of the LED circuit board. It's designed to better withstand shock and vibration and allows for improved heat distribution.Now, it is a LED system. LEDs make great replacements for incandescent lights.
They last longer. They burn brighter. They're more efficient. With LEDs you don't have to worry about replacing bulbs or worry about brittle filaments. We're looking at a durable, polycarbonate lens and housing.
It has the surface mount installation with the built-in mounting flange. Three mount hole design. Mounting hardware not included.On the backside, it features a weathertight connection with the included two-wire pigtail plug. That fits into these little connection points and does a great job at keeping dirt, grime and moisture away from the connection terminals. And then you have a two-wire design, black wire for power, white wire with a ring terminal on it.
That's your ground wire. It is a PC rated unit. The overall dimensions starting with the overall diameter going edge to edge gives us a measurement of 2 15/16 of an inch. And then the thickness is 15/16 of an inch thick. That's from the front to the back of the housing, but again, it's a recess mount installation.
Got that built-in flange, and so really, the only portion that's visible is going to be that portion there, and as you can see that's a really nice low-profile design from the bottom of the lip to the outermost point of the lensing right there.The light face, just measuring that lens area, is about two inches. The diameter hole that this sit in is 2 3/16 to 2 1/4, right in that area. And then the distance you have between the mount holes on center is 2 1/4 inches.We're going to go and hook it up to power. That way you can see what it looks like with some power running to it. We'll also turn off our overhead lights so you can see it in a low light setting. You can see here that it sends out a nice bright consistent signal. This is a amber light so it's got the nice amber lens on there, and it features five LEDs or five diodes, so the multi-diode design really helps optimize the overall light output. Power draw at 12.8 volts is 0.063 amps. Optronics also puts a lifetime warranty on the LEDs.That's going to do it for today's look at the Optronics LED Trailer Clearance or Side Marker Light.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews

Raymond
5/24/2026
At first the light was brighter than the other lites on the trailer. It has settled down so as to match the brightness of the other lights.

Victoria H.
3/26/2025
Wow, that's great to hear that these have held up so well for you Pat! Keep shining bright :)

Pat
3/27/2026
Its been a couple years of Michigan weather and winters with the most hated road salt. The LED lights are still working without any issues. I still recommend buying these lights you wont go wrong.

Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Mike L.
3/31/2026
That's great to hear, Jim! I'm glad to hear your marker lights are working well for you. Where's your favorite boating spot? I really like Table Rock Lake in Missouri near Branson...