bing tracking image
  1. Accessories and Parts
  2. Pro Series
  3. Camper Jacks
  4. Trailer Jack
  5. Jack Wheel
  6. Wheel w Caster Assembly
Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs
Pro Series

Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs

Part Number: PS1400750340
In Stock
$23.40
Retail:$28.50
You Save: 18%
Accessories and Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Corrosion-resistant, removable caster has fitting for 2" jack tube and is rated at 1,200 lbs. 1-800-940-8924 to order Pro Series accessories and parts part number PS1400750340 or order online at etrailer.com. Free expert support on all Pro Series products. Great prices and Fastest Shipping for Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (483)
  • Q & A (0)
  • Videos (2)
  • Photos

Pro Series Accessories and Parts - PS1400750340

  • Camper Jacks
  • Trailer Jack
  • Jack Wheel
  • Wheel w Caster Assembly
  • Pro Series
  • 2 Inch Diameter Tubing
  • 6 Inch Wheel

Corrosion-resistant, removable caster has fitting for 2" jack tube and is rated at 1,200 lbs.


Features:

  • Caster assembly fits jacks with 2" tubing
  • Swiveling caster
  • Clear zinc finish on caster base resists rust


Specs:

  • Fits: jacks with 2" diameter tubing
  • Wheel diameter: 6"
  • Capacity: 1,200 lbs
  • Limited 1-year warranty


Dimensions of caster cup


1400750340 Pro Series 6" Caster with Pin - 1,200 lbs

1400750340 Fulton Removable Caster and Pin Assembly




California residents: click here


Video of Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks: The Breakdown

Today, we are going to review Part Number PS1400750340. This is the Pro Series 6 Inch Detachable Caster with the Pin for 2 inch diameter jacks. It has a 1200 lb. capacity. This caster assembly is designed to fit jacks with a two inch inner tub. This is a swiveling caster so when you have this installed, you can see that it will swivel. They do use a clear zinc finish on this caster base to help resist rust.

I will show you the pin. It pops right off. Again it is designed when you measure this, the outer is 2 1/4. The inner is 2 inches. The inner tube of your jack would slide in here and then you would run your pin through this, through the hole in your inner tube and then clip it into place to hold it into position. It is designed as a, the wheel diameter, it is called a 6 inch jack and the reason that is the diameter of this wheel you can see if I put a ruler on it, it is going to be right at 6 inches.

Again, the capacity is 1200 lbs. and it is stamped on the side here so you do want to make sure that when you do put this on a jack that might be rated at 3200 lbs. that when you put it on a wheel, it will limit you to the 1200 lb. capacity. That should do it for the review on Part Number PS1400750340. This is the Pro Series 6 Inch Detachable Caster with the pin for 2 inch diameter jacks and a 1200 lb.

weight capacity. .

Customer Satisfaction Score:

Ratings & Reviews

4.8

483 reviews
Corrosion-resistant, removable caster has fitting for 2" jack tube and is rated at 1,200 lbs.

by:

Nice wheel



by:

Fast Shipping. Thanks.



by:

Nice quality product .



by:

Great quality for a good price.



by:

Good value, speedy delivery



by:

Works just fine ...



by:

The wheel rolls and spins as advertised.



by:

fits on tongue jack just fine.



by:

Did the trick! 5*'s! Perfect!



by:

It was precisely what I wanted.



by:

Large wheel make moving easier



by:

The caster arrived quickly and it operates smoothly.



by:

Great service, good pricing, fast shipping. I'm very pleased



by:

Mounted the 6 inch caster with no problem and it works great.



by:

excellent serviceexcellent items, very fast delivery. thanks much



by:

its in good condition , and exactly what i wanted



by:

Very Satisfied!Very satisfied with the product and the speed of delivery!



by:

All around excellent! Good product, good service, good price. Can't ask for more.



by:

The product is as advertised which, I think makes it great. You know what your going to get without guessing.



by:

This wheel fit very well.The quality for the price is really good.



by:

arrived in a speedy time , worked out great a real back saver so glad we ordered it from you



by:

The peo Series caster wheel 1,200 lbs is a perfect mach for the jack and a grate price to Think you



by:

I can now move my camper around by myself. I used to need one person to lift the front up while i push. MUCH nicer now.



by:

Exactly what I thought it would be and a good price as well.
It was shipped the day I ordered it and was here in days.
Great company to deal with, this is the second item I have ordered from eTrailer, and AGAIN I am happy.
I will use them again.



by:

The caster wheel fit perfect and is very sturdy.

Scott Z. profile picture

Scott Z.

3/28/2014

Yes everything is still good, no problems.


25
483
Show More Reviews

See what our Experts say about this Pro Series Accessories and Parts

  • 2000-lb A-Frame Jack to Replace Atwood 80274
    Based on my research the Atwood jack 80274 was an A-frame type side-wind tongue jack with a 2K weight rating. The Pro Series jack # PSRV20000103 that you referenced is a suitable replacement for this discontinued product. The Pro Series offers a 2K weight rating, 14-inches of lift and measures 13-inches from the mounting bracket to the top, excluding the handle. This jack does not come with a wheel or foot plate but you can use either wheel part # PS1400750340 which will reduce capacity...
    view full answer...
  • Replacing Flat Plate on Trailer Jack With a Replacement Wheel
    I do have an option for you to replace the bottom plate of your trailer jack with a wheel assembly. The option I have is the Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs # PS1400750340. This corrosion-resistant, removable caster has fitting for 2" jack tube and is rated at 1,200 lbs. I have attached a picture that shows the dimensions of the caster.
    view full answer...
    Image 1 for
  • Is There a Swivel Jack with Snap Ring Compatible with 15 Inch Lift and Caster with 1200 lb Capacity?
    All of the 15 inch lift jacks with the snap ring are rated for 2,000 lbs or more. The reason why you aren't finding a wheel in that lift is because the wheels are not rated for that capacity. The jacks with the integrated wheel don't have the same lift, but they do have a wheel diameter that impacts the height adjustment. The Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301 has a 6 inch diameter wheel so the bracket height will be...
    view full answer...
    Image 1 for
  • Recommended Trailer Jack With 1,500 lb Capacity and Retracted Height of 12-3/4 Inches
    The Fulton Snap-Ring Swivel Marine Jack with Fixed Length - 400 lbs # F1410050149 has a fixed height of 14-1/2 inches. We don't have a fixed height option for a 1,500 lb jack, so I recommend the Fulton Bolt-Thru Swivel Marine Jack - Bolt On # FXP15L which is shorter at the retracted height of 12-3/4 inches but also extends to 24-3/4 inches. I've attached a couple videos to assist.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Replacement Jack for a 2007 Nu Camp Tab 320 Trailer
    Yes, we do Larry. The newer Tab 320's come with a jack similar to our Round A-Frame Trailer Jack item # TJA-5000S-B. This attaches to the a-frame mounting bolt pattern and measures 15" from the bottom of the mounting bracket to top of jack. It measures 8-3/8" when retracted and 24" when extended to give you 15-5/8" of travel. To add a wheel you can use the Ram Removable, 6" Poly Caster Assembly for 2" Jack Tube item # JC-101. The Pro Series Round, A-Frame Jack item # PS1401000303, you...
    view full answer...
  • Recommended Sidewind A-frame Jack for Small Karavan Utility Trailer
    I looked up your Karavan trailer online, and found it has a GVWR just shy of 3000 lbs. I'd recommend the Pro Series Sidewind A-frame jack, part # PSRV20000103. The jack has a 2000 lb capacity, which is plenty for your small trailer, as the jack won't need to pick up the entire weight of the trailer, just it's tongue weight. The additional capacity means that jack won't need to work very hard and should therefore last you a very long time. The jack doesn't include a foot plate, which...
    view full answer...
  • Recommendation To Make A 1-1/2 Inch Diameter Jack Compatible With A Caster Wheel For 2 Inch Jacks
    The Atwood Caster Wheel AT80259 is for 2 inch diameter jacks and has been discontinued. I recommend using a caster like # PS1400750340 that has a metal base with a pin and using a piece of metal tubing from a local hardware store as a sleeve to give you that extra diameter for a strong fit between your jack and the caster. I recommend drilling holes in your jack and sleeve to make the caster compatible with the pin for security.
    view full answer...
  • Fulton F2 Swing-Up Jack for a T@B TAB Tear Trailer with a 1.5
    I think the Fulton F2 Swing-Up Jack is a good choice. The model for 4 - 5" frames is # F1413140334. The 1600 lb. tongue weight rating is much more than you need, but won't affect the function of the jack. The height will work and it will get the jack level with the tongue when traveling. My only concern would be that you have enough space on your frame for the jack to swing up. You will need approximately 25" of frame space that is free from other accessories to allow the jack to swing...
    view full answer...
    Image 1 for Image 2 for
  • Is a Support Plate Needed When Installing Bulldog A-Frame Trailer Jack # BD1550101344
    It would be a good idea to add a support plate, like # BDSPB50, when installing A-frame jack # BD1550101344. The plate can be welded or bolted on. This plate fits on the underside of the trailer. The jack will then bolt into place. If you need a foot use # PS1400700340 or for a wheel use # PS1400750340.
    view full answer...
  • Low Clearance A-Frame Trailer Jack that Can be Fitted with a Wheel or Footplate
    The footplate for Bulldog rack and gear jack # BD018520 is welded to the foot and cannot be removed but I do have some recommendations for you. First, take a look at Pro Series jack # PS1401000303. The mounting bracket is very low relative to the bottom of the jack tubes, 5-1/2 inches. You can use footplate, # PS1400700340 and wheel # PS1400750340. The wheel is rated for 1,200 pounds so it would limit the jack capacity to 1,200 pounds also. And we also have Bulldog jack # BD155033 with...
    view full answer...
  • Recommended Trailer Jack to Use with Bulldog Heavy-Duty Cast Head Coupler # BD44150WH301
    I do have a solution for you, however the Bulldog Square A-Frame Jack referenced in your question will not work well with the Bulldog Heavy-Duty Cast Head Coupler # BD44150WH301. This is because this particular coupler features a 2-1/4 inch diameter hole that is designed to accept round tube trailer jacks, not a square design like the Bulldog model you mentioned. For this coupler, I instead recommend looking at the Bulldog Round A-Frame Jack # BD1550101344. This is another great 3,000...
    view full answer...
  • Replacement Caster Wheel for Haul Master Jack with 2 Tube
    The # PS1400750340 will work for you as long as the tongue weight on your trailer is not greater than 1200-lbs. Wheels always reduce the weight capacity.
    view full answer...
  • Need Tube Dimensions On A Caster Wheel For A 2 Inch O.D. Tube On A Trailer Tongue Jack
    The tube diameters on the Pro Series 6 Inch, Detachable Caster w/ Pin, part # PS1400750340, is 2 inch inside diameter and 2-1/4 inch outside diameter. The down tube on a 2 inch jack will fit inside the 2 inch tube on the caster. You will need to make sure that the jack will have the hole in the down tube for the pin on the caster to go through and hold the caster to the jack. Also, both of the casters have a weight capacity of 1,200 lbs. If these casters are used on a jack with a higher...
    view full answer...
  • Trailer Jack Option for Trailer with 1-3/4 inch Hole for Jack Leg to Fit
    All of the sidewind jacks like the part # PSRV20000103 will have an outer diameter of 2 or 2-1/4 inches. This one happens to be 2-1/4 inches. You would have to open up the lower hole to match the correct size of the larger jack. A qualified fabricator in your area would have no problem doing this. This jack would work great for you as it has more than enough capacity. For a foot plate you would need part # PS1400700340 or a wheel caster # PS1400750340.
    view full answer...
  • Do Trailer Jack Wheel Casters Allow Trailer to Move a Couple Inches to Allow Easier Hitching Up
    Wheel casters like the part # PS1400750340 that you referenced are designed for exactly what you mentioned. They allow you to move the coupler of a trailer a couple inches over to fit on a coupler ball. These aren't universal fit wheels though and they'll require you know what jack you have to pick out the correct wheel. For example, this wheel fits the jack # PS1400600303.
    view full answer...
  • Small Diameter Jack Caster Wheel Needed to Raise Rear of Horse Trailer
    I have looked through the various jack casters we offer, and a 6 inch diameter wheel is the smallest one that is offered. It sounds to me as if you need a jack that has a shorter distance between the bottom of the mount and the bottom of the outer tube, in order to bring up the rear of your trailer. (See photo.) Since your jack is most likely an A-frame mount, the Pro Series # PS1401000303 jack has the lowest mount height of any of our 2000 lb jacks at about 3-1/4 inches. If you do not...
    view full answer...
    Image 1 for
  • Electric Tongue Jack for Straight Pole Tongue Recommendation
    The only electric power jack we have for the pole tongue is the Fulton XLT Powered Drive Trailer Jack - Drop Leg - Side Mount - 22" Lift - 2,500 lbs # F141401. This jack will allow up to 22 inches of lift using the 8 inch drop leg and 14 inches of screw travel and will fit 3 to 5 inch tall frames. The only way to use a caster wheel on this jack is to remove the drop leg and use a caster wheel like the Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks # PS1400750340. The electric...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Trailer Jack Recommendation for a 2005 Haulmark Transport 6X10
    I looked up some pictures of your trailer and it looks like the style of jack that came on your trailer is an A-frame style jack like part # PSRV20000103. This would be a great jack to use as a replacement as it should replace what you currently have and has plenty of capacity. I feel confident recommending this jack because of how many positive reviews it has as well. You may also be interested in a wheel caster part # PS1400750340 but should note that it would reduce the capacity of...
    view full answer...
  • Replacement Wheel For Trailer Jack On Eagle Trailer
    It sounds like you need the replacement wheel with the caster for your Eagle trailer. We carry replacement kits which are based on the trailer jack weight capacity. If the inner jack tube you have measures 2 inches, I recommend the Pro Series Detachable Caster with pin, part # PS1400750340. This wheel is rated at 1200 lbs and features a removable corrosion resistant caster with a 6 inch diameter wheel. I pulled one from our warehouse and took a couple measurements. I have attached a photo...
    view full answer...
  • What are the Dimensions of the Outer and inner Tubing of Trailer Jack # PS1401000303
    I went out to the warehouse to measure the Pro Series Round, A-Frame Jack, # PS1401000303. The outer tube is 2-1/4 inches in diameter. The inner tubing is about 1.97 inches in diameter. This jack does not come with a wheel or footplate. For a wheel, you can use # PS1400750340. For a foot plate, you can use # PS1400700340.
    view full answer...
    Image 1 for
  • Replacement A-Frame Trailer Jack for 2017 Rockwood HW296 Tandem Axle Pop-up Camper Trailer
    We can help you select a new A-frame tongue jack for your 2017 Rockwood HW296 tandem axle pop-up camper trailer. Since these jacks use a standardized mounting pattern all you need to do is match up the weight capacity. this camper trailer has a GVWR (gross vehicle weight rating) of 5000-lbs. For a value option consider the Pro Series topwind jack # PS1400600303 that can be used with caster wheel assembly # PS1400750340. For a sturdier option use Bulldog jack # BD155032 with caster wheel...
    view full answer...
  • Replacement Trailer Jack with Wheel for Camping Trailer Application
    For your diameter requirements, I assume you are referring to the lower leg outer diameter. All standard jacks like the Bulldog Round Jack without Mount - 2K # BD1500520317 have a 2-1/4 inch diameter for the top outer tube and a 2 inch outer diameter for the lower. You can use the Pro Series 6", Detachable Caster # PS1400750340 for this application.
    view full answer...
    Image 1 for
  • A-Frame Jack Replacement for a Carry On 5x10LGW2K Trailer
    I looked up pictures of your Carry On 5x10LGW2K trailer and it uses a standard A-frame design so for an easy replacement the Pro Series Jack part # PSEA20000103 would be a great topwind option just like what came on the trailer. For a caster wheel you would want the part # PS1400750340 or for just a standard foot plate part # PS1400700340.
    view full answer...
  • Is an Extendable Foot Available for Pro Series Round Topwind A-Frame Jack # PS1400600303
    We do offer a foot plate for the referenced Pro Series Round Topwind A-Frame Jack # PS1400600303. The jack does not include any foot plate or wheel but both are available. I have linked a video on this Pro Series item. The foot plate is part # PS1400700340 and it includes the pin to secure it to the inner tube of the jack. We also offer a caster wheel attachment rated at 1200-lbs, part # PS1400750340, which also includes the pin to secure it to the inner tube of the jack. Note that both...
    view full answer...


< Previous
123. . .5



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Joshua S
Video Edited:
Joshua S
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Zach D
Video by:
Zach D

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<