Low Clearance A-Frame Trailer Jack that Can be Fitted with a Wheel or Footplate

Updated 05/01/2014 | Published 04/29/2014

Products Featured in This Question

Replacement Rack-and-Post Assembly w/ Footplate for Bulldog Rack-and-Gear Jack - 23-1/2"

(26)

$70.88

Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs

(516)

$64.25

Replacement 6" Caster Wheel for Bulldog Trailer Jack with 2" Tube Diameter - Qty 1

(80)

$37.00

Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs

(715)

$11.20

Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs

(483)

$23.73

Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs

(829)

$57.36

Question:

Is the footplate removable or permanently attached? I would only be interested in this jack if the footplate is removable. I want a low clearance, below the mounting bracket, jack that can be used with either a removable footplate or a removable wheel.

asked by: Steve

Helpful Expert Reply:

The footplate for Bulldog rack and gear jack # BD018520 is welded to the foot and cannot be removed but I do have some recommendations for you.

First, take a look at Pro Series jack # PS1401000303. The mounting bracket is very low relative to the bottom of the jack tubes, 5-1/2 inches. You can use footplate, # PS1400700340 and wheel # PS1400750340. The wheel is rated for 1,200 pounds so it would limit the jack capacity to 1,200 pounds also.

And we also have Bulldog jack # BD155033 with the same bracket measurement. It can take the same footplate. Use wheel # BD500245 rated for 1,200 pounds. I have linked video reviews for both jacks for you.