bing tracking image
  1. Camper Jacks
  2. Lippert
  3. A-Frame Jacks
  4. Pop Up Camper
  5. Teardrop Camper
  6. Travel Trailer
Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs
Lippert

Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs

Part Number: LC69VR
In Stock
$301.74
Camper Jacks
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord (sold separately) lets you power the jack directly from the 7-way on your vehicle. Extends 6" in 47.1 seconds with 1,000 lbs of tongue weight. 1-800-940-8924 to order Lippert camper jacks part number LC69VR or order online at etrailer.com. Free expert support on all Lippert products. Great prices and Fastest Shipping for Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (415)
  • Q & A (0)
  • Photos

Lippert Camper Jacks - LC69VR

Highlights

  • Lifts Your Trailer Easily: Electric power raises or lowers your trailer quickly with minimal effort.
  • Handles Heavy Loads: 3,500 lb lift capacity gives solid support for loaded trailers.
  • Sets Up Fast: Bolt-on install with included hardware makes it an easy DIY upgrade.
  • Works Quietly: Helical-cut gears mesh smoothly for quiet, efficient operation.
  • Built to Last Outdoors: Heavy-gauge steel and black powder coat resist rust and corrosion.
  • Lights Your Coupler at Night: Three LEDs brighten the hookup area for safe nighttime setup.

Features to know about

Raises Your Trailer Fast and Easy: Electric Lift with 3,500-lb Capacity

No one wants to crank a manual jack after hours on the road. The Lippert Power Stance Electric Trailer Jack does the lifting for you at the push of a button. With an 18" lift and a 3,500-lb capacity, it handles heavy tongue weights with steady power. It extends 6" in about 47 seconds under a 1,000-lb tongue load, giving you plenty of strength without the strain.

Powers Up Any Way You Need It: Dual Power Options with Auxiliary Cord Compatibility

Worrying about draining your trailer battery is a thing of the past. This jack can connect directly to your tow vehicle using the Power Swap Auxiliary Cord (sold separately), or you can wire it into your trailer’s 12V system. The two-way to 7-way plug powering setup gives you flexibility wherever you park. When not in use, the cord stores neatly under the jack cover so it’s always ready for the next trip.

Smooth, Quiet Motion Every Time: Helical-Cut Gears and Durable Switch Design

Nobody likes noisy or jerky movement when setting up camp. The Power Stance uses helical-cut gears with angled teeth that mesh gradually for quiet and efficient operation. The enhanced rocker switch is built for regular use and gives you smooth control when lifting or lowering your trailer. It feels solid every time you hit the switch.

Built to Last Outdoors: Heavy-Gauge Steel with Rust Protection

Rain, dust, and road grime don’t stand a chance against this jack’s construction. The housing is textured to resist chips and cracks, while the black powder coat finish keeps rust and corrosion under control. The heavy-gauge steel tubing provides strength where it matters most, giving you long-term durability from campsite to driveway storage.

Ready for Night Setups: Triple LED Work Lights and Handy Chain Storage

Evening arrivals are easier when your hitch area is lit up right where you need it. Three LEDs illuminate the coupler zone so you can see clearly in low light. A built-in storage ring keeps your safety chains off the ground—no more kneeling in dirt or tripping on loose links while setting up or breaking down camp.

Specs

Dimensions

  • Bracket height: 10-3/4" Retracted 28-3/4" Extended
  • Lift: 18"
  • Footplate diameter: 5-1/2"
  • Outer tube diameter: 2-1/4"
  • Inner tube diameter: 2"

Performance

  • Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 47.2 seconds Retracts 6" in 43.5 seconds

Electrical

  • Power consumption: 30 amps

Weight and Capacity

  • Lift capacity: 3,500 lbs

Warranty

  • Warranty: 1-Year limited warranty

813748 Lippert Components (LCI) Power Stance 3500 Electric Tongue Jack - 18" Lift





Ratings & Reviews

4.8

414 reviews
Review sort icon
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord (sold separately) lets you power the jack directly from the 7-way on your vehicle. Extends 6" in 47.1 seconds with 1,000 lbs of tongue weight.

by:



by:



by:



by:



by:

QUIET motor quick ship



by:

Item came 3 days earlier than expected, WOW!!!



by:

Fast delivery fast install works great



by:



by:

Very happy with the the overall experience. Timely delivery



by:

Outstanding Jack and service.



by:

Delivered quickly, Easy install. Works great!



by:

Easy to install and has worked great for the past year.



by:

Perfect fit and operates very quietly and with abundant power for my 27 foot Lance travel trailer. The Jack-It Lippert bike rack mount fits perfectly over it, and the manual emergency jack crank fits within the tube of the Jack-it if the need arises. Also, the handy ring for stowing the trailer chains and receptacle for stowing the 7-way connector is a nice feature. Very happy with my purchase, and etrailer is fantastic, as usual!



by:

Works as shown, easy to install



by:

It works great was easy to put on camper all the hardware came with it. It came on time within 3days.



by:

It was easy to install and it is a great jack all the way around. Would highly recommend



by:

The service and shipping were beyond my expectation. I will be installing this to replace my original jack that failed soon. Thanks for the help and quick service !!!



by:

This is a Christmas gift so can't really provide a product review at this time. I can say the ordering process, free shipping and quick delivery were excellent, thank you!



by:

Instalation was quick and easy. Operates perfectly! It looks good too! Etrailer & UPS was on the ball with shipping. Got it two days ahead of schedule!



by:

Nice jack it operates quite like the fact it has a hanger to hang safety chains and rv plug storage



by:

Year of use and consistent performance. Would be five star but wish it was a little faster.



by:

Fast shipping & accurate description. Easy to replace our worn out electric jack. Removal and installation took less than an hour. Very handy having a place to hang the chains. The LED light is also a plus. We've had it over a year installed, with no issues!



by:

Good product, timely delivery, works pe rfectly.



by:

Fit with no problems. I really like the auxiliary power cord.



by:

The product works as designed. Easy to install and I have used it approximately 20 times in the last year. The storage for the 7 pin connector and safety chains are a great option. Keeps things nice and tidy when unhooked. I highly recommend this Jack.

Ron profile picture

Ron

11/19/2023

Still works like new and this trailer gets used a lot. Great product.


25
25

See what our Experts say about this Lippert Camper Jacks

  • Troubleshooting Lippert RV Jack that will Retract but Won't Extend
    Hey Gary, yes that does sound like a switch is at fault. I am not sure which Lippert jack you have but we do have the replacement switch part # LC49MD which does fit Lippert jacks. If what you have looks different email me a picture of the jack/switches and I'll see what you might need.
    view full answer...
  • What Jack is Faster Than the Lippert LC69VR
    Hey, Mark! I'm not 100% sure what you mean by wanting to be able to rotate the jack, but you can change how the back is mounted on the trailer so that it's facing another direction. There is a picture attached below demonstrating what I mean. In regard to jack speed. There are a few jacks that are a little faster but the fastest jack we have is the Ultra-Fab Phoenix jack part # UF38-944055. It can lift 6" in 20 seconds. The Lippert jack you have, part # LC69VR, take 46 seconds to lift...
    view full answer...
  • Compatible Drop Leg For The Lippert Power Stance Electric Trailer Jack
    Yes, I went out to the warehouse and test fit legs on the Lippert Power Stance Electric Trailer Jack # LC69VR and found that the Drop Leg for Lippert Power Jack # LC405217 is a compatible match. This drop leg will slide into the inside of the inner tube and can be pinned in place with the included pin/clip.
    view full answer...
    Image 1 for
  • Where Do You Connect The Power Wire Of A Lippert Electric Trailer Jack?
    The power wire for your Lippert Electric jack should be run to a dedicated 12v battery in your trailer, but it sounds like you have it wired to the break away switch battery. I recommend unwiring it from the break away switch battery as if you drain the battery by using the jack while it is unhooked from the vehicle you could run into an issue of the break away switch not working properly in an emergency situation. If you jack is the Lippert Power Stance Electric Trailer Jack with Footplate...
    view full answer...
  • Can the Lippert Power Stance Electric Trailer Jack Be Rotated
    Yes, you can rotate an a-frame trailer jack like the Lippert Power Stance Electric Trailer Jack part # LC69VR. The mounting pattern is concentric which allows the jack to be rotated for clearance.
    view full answer...
  • Standard Bolt Pattern for Jack Mounting Bracket on A-Frame Trailers.
    The 3-bolt mounting flange on the Lippert Electric A-Frame Trailer Jack # LC69VR has a standardized hole pattern. The bracket for mounting a jack on a A-frame trailer has a bolt pattern of 3 inches. The bolt holes may be different sizes which is why you'll see slotted holes on the jack.
    view full answer...
  • Recommended Replacement Electric Tongue Jack for Geo Pro Trailer
    The Lippert Electric Trailer Jack part # LC285318 would likely be a direct replacement for the existing tongue jack. That said, there is a newer upgraded model in the Lippert Power Stance Electric Trailer Jack part # LC69VR so this is what I recommend for a full replacement. They both should work with the Jack-It. If you can provide me with the exact model number of the jack I can see if there is a replacement rocker switch assuming that's indeed the issue. The Lippert jacks all come with...
    view full answer...
  • Weight of Lippert Power Stance Electric Trailer Jack
    The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR is 45 lbs at shipping. The packaging will likely be a couple lbs so you will want to consider that. The Power Stance without the plug # LC69VR has a shipping weight of 40 lbs.
    view full answer...
  • Does Lippert Power Stance Electric Camper Jack Come with 7-Way Plug?
    The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR comes with the auxiliary power wire for trailer 7-way power connection. However, the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR comes with the power wire for the trailer battery connection only. The Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack # LC79VR is sold separately and is 6 feet long.
    view full answer...
  • Replacement Toggle Switch For Lippert Power Stance Trailer Jack
    It will indeed work; I just checked with Lippert for you and was able to verify the correct toggle switch for your Lippert Power Stance Electric Trailer Jack # LC69VR (which is the 813748), is the following: - Replacement Extend/Retract Switch for Lippert Electric Trailer Jack # LC49MD
    view full answer...
  • Recommended Electric A-Frame Jack for Travel Trailer
    It's a smart idea to go from a manual A-frame jack to an electric jack because it is so much easier, and there is a great option that will work for your travel trailer that makes using the jack super simple. The jack I recommend for you is the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR. Not only is this jack easy to use, allowing you to retract or extend with the flip of a switch, but you can power it via your truck's 7-way by adding...
    view full answer...
  • Recommended Replacement Electric Tongue Jack for Airstream Land Yacht
    The type jack you are needing for your 28 foot 1972 Airstream Land Yacht, if you wish to replace with a similar type jack, is referred to as an A-frame Trailer Jack. Yes clearance with most of these jacks won't be great. For a powered option, I suggest the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift, # LC69VR. While this wires in to the 12V system on your camper, you can also get the Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack,...
    view full answer...
  • Availability of Powered Side Mount Jack for Boat Trailer
    The Lippert # LC69VR jack is meant for an A-Frame trailer and wouldn't be compatible with a straight or pole tongue trailer like what's used on a boat trailer without extensive fabrication work. This being said, we do have a side-mount powered trailer jack that would work well for you, The Fulton XLT, part # F141401. The jack has a 2500 lb lift capacity, as long as the tongue weight of your boat and trailer is under 2500 lbs, the jack would work great for you. The jack bolts into place,...
    view full answer...
  • Gauge Wire for Install of Lippert Power Stance Electric Jack LC69VR
    When installing the Lippert Power Stance Electric Jack # LC69VR I'd recommend using 10 gauge wire like part # 10-1-1 which we sell by the foot as this would have the amperage requirements to power the jack.
    view full answer...
  • Lippert Electric Trailer Jack Power Cord Length
    The Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack # LC79VR is 6 feet long and designed to work with the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR.
    view full answer...
  • Will Lippert Power Stance Trailer Jack Fit On A-Frame Trailer With Limited Clearance?
    It sure will! I had our warehouse measure the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR you were looking at and from the back of the jack tube to the back of the head of the jack is 1-1/2" as shown in the included diagram. I included a video of the # LC69VR for you to take a look at.
    view full answer...
    Image 1 for
  • Powered A-Frame Jack that Can Fit with 5 inches of Clearance to Propane Tanks
    The Lippert Power Stance Electric Trailer Jack part # LC69VR would work really well with the limited clearance you have as you can see in the attached picture that it does not hardly require any clearance behind the jack tube.
    view full answer...
    Image 1 for
  • Distance From Bracket to Top of Lippert Power Stance Electric Trailer Jack
    I was able to get the measurement you were looking for of the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR. As you can see in the accompanying photo, the distance from the bracket to the very top of the jack is 21-1/2 inches. The jack will give you a total of 18 inches of lift and has a hefty 3,500 lb capacity. It is simple to use, and can even be powered from your tow vehicle's 7-way simply by adding one part, which is the Auxiliary...
    view full answer...
    Image 1 for
  • Could Lippert Power Stance Electric Jack Fit 2016 Forest River Freedom
    What's great about trailer jack mounting brackets on A-frame trailers is that they are all the same dimensions so you could replace what you have now with the Lippert Power Stance part # LC69VR that you referenced on your 2016 Forest River Freedom.
    view full answer...

Do you have a question about this Camper Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew K
Installed by:
Andrew K
Employee Jeff D
Installed by:
Jeff D
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Eric H
Updated by:
Eric H
Employee Kristina F
Written by:
Kristina F
Employee Aidan B
Video by:
Aidan B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.