See what our Experts say about this Dexter Accessories and Parts

• Looking For Rubber Flexible Brake Line On Hydraulic Brake Drum For 2009 LoadRite Boat Trailer
  Hey there Kenneth. We have two flexible hydraulic brake hoses that are close to your original 14" length and may work with the # AKFBBRK-7 brake assemblies: Dexter # T0777300 – 13" long with straight 3/8"-24 male and female fittings. Dexter # 18018-SF – 18" long with 3/8"-24 fittings and a 90-degree male end. Both have the same thread size, so it comes down to matching your existing connections, fitting orientation, and making sure there's enough length for suspension movement without...
  view full answer...
• How To Replace Brake Lines Inside Fold Away Trailer Tongue
  Hello John, thanks for reaching out. Generally the brake line would be coiled inside the stationary part of the tongue, so you can pull it out and service it when needed. If you are unable to pull the line out to replace it, I am afraid there is really no easy way to get inside the tongue to loosen the lines. Unless you can find someone with some really small hands lol, they only way to replace things would be to pull the lines out the back of the tongue and start over. Make sure you...
  view full answer...
• Can a Fold-Away Trailer Tongue Hinge Kit Work with Hydraulic Surge Brakes
  You can use a fold-away hinge kit with a surge coupler but you will need to replace the hard brake line with a flexible hose like # T0777300 that you have referenced. For fold-away drum brake applications use # T4839000. For a 3 x 4 inch tongue use 2 adapters # T4842100.
  view full answer...
• Troubleshooting Sticking Trailer Surge Brakes
  As long as your Titan model 60 surge brake actuator is rated for disc brakes and is in good working order it should have not problem activating 4 sets of brake assemblies. If your brakes are sticking all of a sudden after having an additional set of brakes installed I would take the trailer back to the shop that did the work and have them go over their installation to see what they possibly messed up. Normally sticking surge brakes are the result of worn out actuator components, so it...
  view full answer...
• How to Modify Brake Lines for Folding Tongue Boat Trailer
  You could the 25 inch long hydraulic brake line with fittings, part # T0980100. You would just need to connect the line to your actuator master cylinder to route brake fluid to your trailer brakes. The fittings are included. We offer the flexible line in a few different lengths as well. For example # T0777300 is 13 inches long.
  view full answer...
• Plumbling Hydraulic Brake Lines for Tri Axle Boat Trailer
  Although I don't have a diagram for a tri-axle trailer, I do have one for a tandem. If you refer to the photo, you would plumb the brake lines as shown, but would add the additional lines and tees for an extra axle. Here's the part numbers of the items shown in the photo. (A) 12-27/32" Long flexible hose ( # T0777300) (B) 18-25/32" Long flexible hoses ( # T0776500) (C)19' Long steel line ( # T4336000) (D) 66" Long steel lines ( # T1086600) (E) 30" Long steel line (...
  view full answer...
  
• Parts Needed to Repair Brake Line Connection on Titan Model 60 Hydraulic Trailer Coupler
  It looks like that is a piece of flexible brake line you are using. You would need standard flexible brake line with a 3/8 inch male fitting. We offer them in varying lengths. A 13 inch long brake line with fittings (male on one end, female on the other) is available as part # T0777300, 18-25/32 inch length as part # T0776500 or a 25 inch long line is available as part # T0980100. If you do not already have one installed, I would recommend a solenoid shield, part # T4835800183 to protect...
  view full answer...
  
• How to Add Brakes to Shorelandr YAV2413SW Trailer
  To add brakes to your Shorelandr YAV2413SW trailer. You will need to know the dimensions of the spindle so that we can determine what hub/drums you would need. Also you will want to know what lug pattern you have so we can get you a set of hubs that does not require you to swap out your wheels. You also will need to know if you have brake mounting flanges on your current spindles as well. I attached a help article that will walk you through the entire process of adding brakes to your trailer....
  view full answer...
  
• Pros and Cons of Adding Cast or Aluminum Disc Brake Calipers to a Boat Trailer
  The first thing to do is verify that the the disc brake calipers and wheel bearings will fit your trailer. The majority of 3,500 lb axles use # L68149 inner, # L44649 outer bearings and the # RG06-050 grease seals, but you should check to be sure. Next, make sure the wheels on your trailer are 14 inch diameter or larger, and that the spring on your trailer is at least 3 inches from the outer face of the brake mounting flange so that the caliper can be installed without contacting the inside...
  view full answer...
• Recommended Trailer Tongue Hinge Kit for 3x5 Inch Frame on Shorelander Boat Trailer w/ Surge Coupler
  For a 3x5 trailer tongue, I'd recommend the Fulton # FHDPB350101 coupler hinge kit. Keep in mind that this hinge isn't for use with aluminum trailer frames. You'll also need to install a piece of flex brake line like the # T0777300 that you referenced. I've linked you to a video that contains more information about the hinge.
  view full answer...
• Hinge Kit Recommendation for a Shorelandr Trailer with Surge Brakes
  For a 3x5 trailer tongue, I'd recommend the Fulton # FHDPB350101 coupler hinge kit. Keep in mind that this hinge isn't for use with aluminum trailer frames. You'll also need to install a piece of flex brake line like the # T0777300 that you referenced. I've linked you to a video that contains more information about the hinge.
  view full answer...
• Will Titan Disc Brake Kit and Aero 7500 Actuator Fit A 3 Foot Swing Away Tongue
  You will just need to order a few extra parts to be able to use the Titan Disc Brake Kit and Aero 7500 Actuator w/ Manual Lockout on your swing away tongue that is 3 feet long. You will need to order the Titan Hydraulic Brake Line with Fittings - 12-27/32 Inches Long, part # T0777300, the Titan Hydraulic Brake Line with Fittings - 30 Inches Long, part # T1061900, and the Titan 3/16 Inch Hydraulic Union, part # T1287900. The 30 inch long brake line # T1061900 will attach to the actuator,...
  view full answer...
• Will the Titan Hydraulic Brake Line with Fittings # T0777300 fit 3/16 inch Brake Lines
  Yes, the Titan Hydraulic Brake Line with Fittings # T0777300 will work with your 3/16 inch brake lines. The fittings are standardized so you will not need an adapter or anything; it will already fit the flare fittings that you currently have. Keep in mind that this has one male end and one female end so you will want to make sure that it is compatible for your purpose. Brake lines do not have a psi rating which is why you cannot find one.
  view full answer...
• Extending Brake Line from Back of Master Cylinder to Use Electric Lockout Solenoid
  You should just need flexible brake line # T0777100 which has 3/8 inch UNF female fittings on both ends. The Solenoid will install directly to the back of the master cylinder, then this short hose which will then connect to the hose already on the trailer. If you need one with a female fitting on one end and a male on the other use # T0777300.
  view full answer...
• Will a Fold Away Coupler Work on a 2002 Blazer Bass Boat Trailer with Hydraulic Surge Brakes
  Yes, the Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item # FHDPW330300, will work on a trailer with surge breaks. You will need to determine the length of the coupler that will be in front of the fold away to select the appropriate length of flexible hydraulic brake line to allow the foldaway to fold without damaging the brake line. We have several lengths of flexible brake line available for this. Titan Hydraulic Brake Line with Fittings - 12-27/32 inches Long,...
  view full answer...
• How to Shorten Hydraulic Disc Brake Lines
  Thank you for your purchase from etrailer! The flexible brake lines you selected, Titan # T0777300 and # T0776500, are not designed for cutting. These are offered in the various lengths to allow you to avoid that need and these flex lines are also intended for use near the brake assemblies where their flexibility allows them to handle the motion of the trailer suspension. If you purchased elsewhere a brake kit with rigid steel lines you will need a flaring tool (which we do not offer)...
  view full answer...
• What are the Fittings on the T0777300 Brake Line
  The flared connections on the Titan Hydraulic Brake Line # T0777300 are 3/8"-24 UNF male and female fittings.
  view full answer...
• Parts Needed to Convert Titan Model 6 Drum Brake Actuator # T4079200 to 4-Disc Brake Operation
  It is possible to rebuild a drum brake actuator to handle the higher pressure and fluid displacement required for disc brake assemblies. However, in the case of your four Kodiak disc brakes (part # K1HR35D) for use on a tandem axle trailer these will require more fluid displacement than can be provided even by a modified Model 6 actuator. A drum-to-disc-modified Model 6 actuator could handle the requirements of two brake assemblies but not four, according to my contact at Titan. He advised...
  view full answer...
• Replacement Adjuster Plugs and Brake Line for Brake Actuator on Trailer with Surge Brakes
  As long as the brake line you need uses 3/8 inch 24 UNF male and female fittings you can use # T0777300 if a 13 inch line is long enough. If not we have # T0776500 that 18-25/32 inches long which is more than enough. The adjuster plugs we carry are # 46-7 for one or # BP10-220 for a pack of four.
  view full answer...
• Selecting a Brake Line Kit for Boat Trailer Being Converted to Disc Brakes
  You are correct to place your disc brakes on the rear axle of your boat trailer since this is where most of the weight will be carried (nearer to the boat's motor). Disc brake and torsion axle applications both require flexible brake lines so yes you can use the kit you referenced, part # DM5424. This kit includes 18-7/8-inch long flexible lines, but if your measurement shows you need longer flex lines we offer various sizes of lines; part # T0777300 is 13-inches; part # T0776500 is 18-25/32-inches...
  view full answer...
• Can the Fulton Fold-Away Coupler Hinge Kit # FHDPB230101 Fit a 16 ft 12K LoadRite Boat Trailer
  The Fulton Fold-Away Coupler Hinge Kit # FHDPB230101 will work perfectly for your LoadRite 16 foot boat trailer as long as the tongue measures 2 x 3 inches and the trailer tongue thickness is between 1.88 and .120 inches. It has a weight capacity of 5,000 lbs so it will be more than strong enough for your boat weight capacity of 1,200 lbs (keep in mind that this will not raise your boat trailer capacity). According to the table that is included with the instructions for a 2 x 3 inch and...
  view full answer...
• Will the Flexible Brake Hose # T0777300 Fit on 3/16 Inch Threads
  The Titan Hydraulic Brake Line with Fittings, # T0777300, is equipped with 3/8 inch -24 UNF fittings that fit on 3-1/16 inch threaded fittings so it should work for you.
  view full answer...
• Is a Flexible Hose Needed to Connect Titan Reverse Lockout Solenoid Valve # T4748800
  You will need to add a flexible brake line hose only if your trailer coupler uses a hinge at the rear of the coupler (if it is a foldaway type). If so, we offer flexible brake line hoses in three lengths, each with male and female 3/8-inch-24 UNF fittings. The 13-inch hose is part # T0777300; the 18-inch hose is part # 18018-SF; and the 25-inch hose is part # T0980100.
  view full answer...
• Availability of 1-Foot Brake Line with 3/8-Inch UNF Fittings
  We offer the Titan Hydraulic Brake Line # T0777300, which is 13-inches long. We also offer # T0776500 which is about 18-inches long overall. These flexible hoses have one male and one female 3/8-inch UNF connector fitting.
  view full answer...

Do you have a question about this Accessories and Part?