Solar Charge Controllers

If your RV solar setup drops off in patchy sun, this MPPT controller tracks power faster and lets you tune battery settings over Bluetooth. Its 30A output fits matched 12V or 24V arrays, so you can see steadier charging day to day.

When your solar setup isn't charging like it should, this MPPT controller improves energy harvest with ultrafast tracking. Built-in Bluetooth lets you monitor and adjust settings in real time, so you can see consistent charging performance.

When your solar setup pushes into higher-voltage series wiring, this MPPT controller steps in with 250V PV input headroom and coordinated multi-controller charging. It keeps larger arrays charging in step without forcing a lower-voltage redesign.

When your solar setup hits charging limits or stops behaving right, this MPPT controller steps in with 150V PV input headroom and precise charge control. It tracks sunlight fast and keeps batteries charging safely without forcing a system redesign.

When your solar setup grows past a smaller controller, this MPPT unit steps in with 150V PV input headroom and 70 amp output. It tracks sunlight fast and keeps batteries charging safely without forcing you to split the array right away.

When you add panels and your old controller starts falling behind, this MPPT unit takes higher-voltage input up to 150V and supports lithium, AGM, gel, and flooded batteries. You can monitor charging by phone and see steadier output as light changes.

Upgrading an RV or off-grid solar setup gets tricky when added panels push voltage limits. This MPPT controller charges 12V, 24V, or 48V batteries and gives you 150V PV headroom, so you get steadier charging from the same array.

When your solar setup grows into high-voltage series wiring, this MPPT controller steps in with 250V PV input headroom and 100 amp output. It keeps larger arrays charging in step without forcing you back to a lower-voltage design.

When you're adding panels to a mid-sized RV or off-grid setup and need more charging without overstepping voltage limits, this MPPT controller boosts solar harvest with a 100V PV limit and 50 amp output, so your batteries charge consistently.

When your solar setup grows past one controller or pushes series voltage limits, this MPPT unit steps in with 150V PV input headroom and 100 amp output. It keeps larger arrays charging in step without forcing a full system redesign.

This Bravo 30 flush mount 30 amp hour MPPT solar charge controller, is designed with RVs, trailers, campers, vans, boats, and off-grid in mind.

When your solar setup grows past one controller or pushes series voltage limits, this MPPT unit steps in with 150V PV input headroom and 85 amp output. It keeps larger arrays charging in step without forcing a full system redesign.

When you're adding a small solar setup to keep batteries up, this 15-amp MPPT controller manages charging with built-in Bluetooth for setup and monitoring. It keeps output steady in changing light so your battery stays topped off.

If you want to upgrade a small RV or trailer solar setup without rewiring everything, this MPPT controller adds smarter charging with built-in Bluetooth. Its 100V PV limit and 20A output fit matched arrays, so you can monitor charging in real time.

If you're adding panels or replacing a controller that can't keep up, this MPPT unit gives you 60 amps of charging with a 150V PV limit. Its charge settings let you match the battery bank, so charging stays steady in changing light.

If you're expanding a trailer or RV solar setup and need more series-wiring headroom, this MPPT controller manages charging with a 150V PV limit. Bluetooth lets you monitor performance in real time, so charging stays visible as conditions change.

30-Amp Bluetooth solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Protects battery from harmful overcharging and uses automatic multistage charging to extend battery life.

This efficient solar charge controller works seamlessly with your PowerTrak setup for advanced solar monitoring. It's dual-bank compatible and stackable, meaning that it is a great option if you are building out a large solar array on your RV.

30-Amp Bluetooth solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Protects battery from harmful overcharging and uses automatic multistage charging to extend battery life.

This solar charge controller protects your system from wiring slip-ups, overcharging, and shorts, so you can focus on the road ahead. Clear directions make DIY installs possible, so you can get set up and stay powered wherever you land.

The Rich Solar charge controller protects your system from wiring slip-ups, overcharging, and shorts, so you can focus on the road ahead. Clear directions make DIY installs possible, so you can get set up and stay powered wherever you land.

10-Amp solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Protects battery from harmful overcharging and uses automatic multistage charging to extend battery life.

This efficient solar charge controller works seamlessly with your PowerTrak setup for advanced solar monitoring. It's dual-bank compatible and stackable, meaning that it is a great option if you are building out a large solar array on your RV.

When you're swapping a small controller or upgrading from PWM, this MPPT unit steps in with better low-light tracking and built-in Bluetooth. Its 75V input limit keeps small arrays in check while delivering steady, controlled charging day to day.