bing tracking image
  1. Roof Rack
  2. Yakima
  3. Aero Bars
  4. 41 Inch Bar
  5. Black
  6. Flush
THIS ITEM IS NOT A FIT FOR
1986 Chevrolet Caprice
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Yakima

Yakima SkyLine FX Roof Rack for Fixed Mount Points - JetStream Crossbars - Aluminum - Black - Qty 2

Part Number: Y62ZD
$749.80
Roof Rack
Not Confirmed to Fit

1986 Chevrolet Caprice

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs to fixed mounting points on your vehicle's roof. Great Prices for the best roof rack from Yakima. Yakima SkyLine FX Roof Rack for Fixed Mount Points - JetStream Crossbars - Aluminum - Black - Qty 2 part number Y62ZD can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (230)
  • Q & A (0)
  • Photos

Yakima Roof Rack - Y62ZD

Highlights

  • Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
  • Complete Roof Rack System: Includes 2 SkyLine FX crossbars with towers and a custom fit kit for your vehicle.
  • Seamless, Factory-Style Look: Flush-mount design keeps a clean profile with no crossbar overhang.
  • Ready for Accessories: Works with channel-mount and clamp-on carriers for bikes, kayaks, skis, and cargo.
  • Quieter Drives: Push-down rubber strips in the top channels help reduce wind noise and vibration.
  • Strong and Lightweight Build: Aluminum construction supports up to 165 lbs while maintaining durability.

Features to know about

Keep Your Roofline Clean: Flush, Factory-Look Crossbars

The SkyLine FX gives your vehicle a low-profile, finished appearance instead of a bulky add-on look. The flush design means the crossbars don’t hang over the sides, keeping everything tight to the roof for a streamlined style. It’s an integrated setup that looks like it was meant to be there from the start.

Cut Down on Road Noise: Aerodynamic Bars with Push-Down Rubber Strips

Wind noise can quickly turn a quiet drive into an irritation. These aero-style aluminum crossbars help reduce that by cutting through the air efficiently, while the push-down rubber strips in the top channels seal out gaps that cause whistling and vibration. The result is smoother airflow and a calmer ride, even when your gear is packed on top.

Bring All Your Gear Without Hassle: Works with Channel-Mount and Clamp-On Accessories

Whether it’s bikes, kayaks, skis, or camping gear, these crossbars are ready for whatever you haul. They work with both channel-mount and clamp-on attachments, so you can use your favorite carriers without needing special adapters. It’s a solid base for everything from summer paddle trips to long road adventures with a cargo box up top.

Quick Setup with Solid Security: Integrated Towers and Lock Compatibility

The integrated crossbar and tower system installs directly to your roof’s fixed mounting points for a sturdy connection. You can also add Yakima Same Key System (SKS) lock cores (sold separately) to help deter theft of both the rack and your mounted accessories. It’s an easy way to load up and lock down your setup before hitting the road.

Built Strong for Every Trip: Aluminum Construction and 165-lb Capacity

You can count on these bars to handle heavy loads confidently. With a weight capacity of 165 lbs and durable aluminum construction, they’re tough enough for hauling boats, boxes, or outdoor gear without flexing under pressure. The black finish keeps things looking sharp while standing up to weather and long miles alike.

Specs

Dimensions

  • Crossbar dimensions: 41-1/2" long x 5" wide x 3-1/2" tall
  • Top channel dimensions: 7/8" wide x 7/16" tall x 7/16" opening

Weight and Capacity

  • Weight capacity: 165 lbs

Color

  • Color: black

Construction

  • Construction: aluminum

Warranty

  • Limited lifetime warranty

8000172 Yakima SkyLine FX SM - Roof Rack Crossbar for Fixed Mounting Points and Tracks - 41-1/2" Long - Qty 2

8000221 Yakima Landing Pad 1

Installation Details Y62ZD Installation instructionsAlternate Instructions Y62ZD Installation instructions



Ratings & Reviews

4.8

1384 reviews
Review sort icon
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs to fixed mounting points on your vehicle's roof.

by:

The product was shipped quickly. The only problem I ordered the wrong part. I needed Yakama Qtowers Roof Rack feet Y00135 I will be returning the other part. I would appreciate if you could refund my money Thanks Walter



by:

etrailer has very helpful technical inf ormation



by:

It says 4 pack on the item description and I got 2? And now there is no reply from etrailer about my inquiry. Is there really someone sending me a request to review this or is George J a computer ?



by:

I have ordered several times from Etrailer and have always received efficient, timely and reasonable shipped items. Did not use customer service with this order but it has always been good.



by:

My order was different. I only needed half of everything. Natalie was great. Lots of help, made everything easy, and followed up. Shipping was fast, too. I recommend these folks.



by:

Quality product, timely shipping, transported with care. Packaging received fully intact with no damage.
Thank you etrailer for yet another great ordering experience!



by:

I ordered a Yakima roof rack system here and it was easy to find what I needed for parts to install on my truck cap. Very solid product and this company ships quickly every time I've ordered from them



by:

This company is great! I was looking everywhere for a set of crossbars that would fit my pop up camper. After not being satisfied with the options I called the customer service line and spoke with Crystal. She was great at recommending which parts would work on my camper. I had a lot of questions and she answered them all. If she didn't know the answer she found out for me. I installed my new crossbars on my camper this afternoon and they fit perfectly! They're solid as a rock! I'm so excited to use them!



by: Greg05/18/2011

Was very pleased with the Yakima racks and installation was a snap! First time customer of etrailer and was elated with whole experience! Shipping was lighting fast too!!! Will do business again...



by:

Om my 1996 Ford Explorer, after the plastic factory cross bars failed, I was able to use the etrailer web site and tech support to determine that landing pads were available that fit the factory track and would allow me to use my Yakima towers and round bars. This was a great fix!



by:

I needed to mount racks on my new topper. Though pricy, Yakima products are so well engineered it's worth it. Wish there was not such a long wait for back-ordered products, but that's not the fault of etrailer.com.
Etrailer.com service is great. I especially like the instructional videos.



by:

It was what it was advertised and fit perfectly on my 2023 Ford Maverick



by: James08/09/2025

Very good, was just what I needed.



by:

These Landing Pads are needed with the Yakima System to connect the Towers (which hold the crossbars) to the rails, which in my case are on top of my pickup canopy. There are many sizes of Landing Pads available, but the Landing Pad 1 I needed connects to the standard Yakima Rails. etrailer had them in stock when I needed them and shipping was fast and easy.



by:

First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.



by:

These will mount to the rhino rack tracks so I could use my Yakima control towers and rack.



by:

I've been using the roof rack a lot in the last year for recreation and for work. They give me confidence that the load will stay put, and arrive safely. I also take them off frequently since they hum happily at highway speeds, so I'm happy that the bars are easy to lock on or take off.



by:

Bought these Landing Pad 1 bases to use with Yakima tracks on a Leer camper shell on my 2016 F150. The bases are very easy to install and worked perfect with my Control towers. Great quality as expected with Yakima.



by:

Product worked well with my already installed Yakima rails and the towers attached to bars that I use on another vehicle. Easily installed. Now I can switch the kayak carrying Yakima bar and tower rigs from one vehicle to the other with minimal effort.



by: Pat G08/29/2013

Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.

Will definitely be doing business with you all again.



by:

with so many variables having someone that could sort through all them was very helpful Thanks etrailer



by: Andrew12/07/2024

Disclosure: I have not had the chance to use the product yet. This review is for Etrailer specifically and the purchase process on these products. I am new to these racks so I read an Etrailer forum on what parts to buy. Trusting their help, they recommended the Yakima landing pads, the Highline towers, and the HD bars; so I ordered. At no time did they or the computer ask me to order the metal adaptor to ATTACH the bars. Being new to the rack system, they should have been on top of this and disclosed that I would not be able to use ANY of my products till I had these tiny metal adaptors. I.E. "Have you bought the correct adaptor to mount your bars?" Anything would have helped! Now I have all three things sitting in my garage collecting dust with a pending order to another company for the tiny metal adaptors, making the delay another week and a half. This puts a sour taste in my mouth.



by:

Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.



by: Shannon10/07/2025

Order was fast and customer service was excellent. Everything fit and looks exactly as it should.



by: Frank P.03/06/2016

Fit good with the OE track on roof. I like the new covers they supplied with the mounts.


25
25

See what our Experts say about this Yakima Roof Rack

  • Recommended Roof Rack for a 2023 Nissan Rogue w/ Side Rails
    I have a great aero roof rack for you but since your 2023 Nissan Rogue has the side rails there isn't an option from Thule to add a roof rack. I checked with Thule and all of the their options are for the naked roof. It does not look like they have a way to grip the side rails. Instead, you are going to want the roof rack by Yakima and it includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - JetStream Aero Crossbars - Qty 2 item # Y76UV Landing Pad 31...
    view full answer...
    Image 1 for
  • Recommended Roof Rack for a 2024 Cadillac XT4 w/ Roof Rails
    Yes, we do! To install a roof rack that attaches to the rails on your 2024 Cadillac XT4 and does not extend over the sides you will need the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - JetStream Aero Crossbars - Qty 2 item # Y76UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
    view full answer...
  • Recommended Roof Rack For a 2016 Honda CR-V With Rails to Carry 2 Kayaks on Malone Kayak Carriers
    Since it sounds like you already have the kayak carriers, I recommend going with an aero style crossbar roof rack. That is because the aero style bars are the most common and accept the most amount of accessories, like the Malone kayak carriers. 2016 Honda CR-V Roof Rack by Yakima - Yakima SkyLine FX Roof Rack # Y76UV - Landing Pad 19 for Yakima SkyLine Towers # Y00245 The 2016 Honda CR-V Roof Rack by Yakima includes what you need to get a roof rack on your 2016 Honda CR-V to use your...
    view full answer...
  • Recommended Flush Mounted Roof Rack for a 2024 Cadillac XT4 w/ Flush Rails
    To attach a roof rack that does not extend past the flush rails on the roof of your 2024 Cadillac XT4, I recommend the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y76UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity and it does not extend past your roof rails. I also recommend adding the Yakima Same...
    view full answer...
  • Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
    You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
    view full answer...
  • What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
    We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
    view full answer...
    Image 1 for Image 2 for
  • Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
    Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
    view full answer...
    Image 1 for
  • What is the Difference Between Yakima Landing Pads 1 and 4
    The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
    view full answer...
  • Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
    Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
    view full answer...
  • What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
    I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
    view full answer...
  • Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
    First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
    view full answer...
  • Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
    Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
    view full answer...
  • Roof Rack System for 2026 Chrysler Pacifica
    Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
    view full answer...
  • Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
    Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
    view full answer...
  • Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
    The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
    view full answer...
    Image 1 for
  • Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
    Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
    view full answer...
  • Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
    Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
    view full answer...
  • Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
    Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
    view full answer...
  • Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
    To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
    view full answer...
  • Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
    You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
    view full answer...
  • How to Add Roof Rack to 2007 Saturn VUE Without Raised Rails
    Hi Stephen; there are no specific kits that will allow you to install tracks and crossbars on your 2007 Saturn VUE. However, that does not mean it can't be done. What you can do is use rails like the Yakima 42" Tracks for Roof Racks # Y01126 which will require drilling. Make sure to measure your roof to ensure you have enough space for the tracks. With the tracks installed you can add crossbars using the SkyLine Towers # Y53TR and Landing Pad 1 # Y00221. Based on the racks designed to...
    view full answer...
  • What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
    The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
    view full answer...
  • Can I Use Yakima SkyLine Towers with Thule Tracks?
    Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
    view full answer...
  • Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
    I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
    view full answer...
  • Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
    Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
    view full answer...
  • Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
    For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
    view full answer...
  • How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
    There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
    view full answer...
  • Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
    Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
    view full answer...
    Image 1 for
  • Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
    You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
    view full answer...
  • What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
    We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
    view full answer...
    Image 1 for Image 2 for
  • Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
    Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
    view full answer...
    Image 1 for
  • What is the Difference Between Yakima Landing Pads 1 and 4
    The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
    view full answer...
  • Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
    Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
    view full answer...
  • What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
    I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
    view full answer...
  • Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
    First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
    view full answer...
  • Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
    Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
    view full answer...
  • Roof Rack System for 2026 Chrysler Pacifica
    Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
    view full answer...
  • Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
    Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
    view full answer...
  • Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
    The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
    view full answer...
    Image 1 for
  • Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
    Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
    view full answer...
  • Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
    Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
    view full answer...
  • Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
    Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
    view full answer...
  • Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
    To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
    view full answer...
  • Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
    You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
    view full answer...
  • How to Add Roof Rack to 2007 Saturn VUE Without Raised Rails
    Hi Stephen; there are no specific kits that will allow you to install tracks and crossbars on your 2007 Saturn VUE. However, that does not mean it can't be done. What you can do is use rails like the Yakima 42" Tracks for Roof Racks # Y01126 which will require drilling. Make sure to measure your roof to ensure you have enough space for the tracks. With the tracks installed you can add crossbars using the SkyLine Towers # Y53TR and Landing Pad 1 # Y00221. Based on the racks designed to...
    view full answer...
  • What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
    The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
    view full answer...
  • Can I Use Yakima SkyLine Towers with Thule Tracks?
    Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
    view full answer...
  • Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
    I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
    view full answer...
  • Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
    Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
    view full answer...
  • Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
    For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
    view full answer...
  • How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
    There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
    view full answer...
  • Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
    Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
    view full answer...
    Image 1 for


< Previous
123. . .11



Do you have a question about this Roof Rack?


Info for this part was:

Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Daron K
Edited by:
Daron K
Employee Alex H
Written by:
Alex H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924