To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Features:
Rhino-Rack Vortex Aero Crossbars - Black - 54" Long - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
How's it going everybody, it's Ethan here at etrailer. Today we're gonna be taking a look at and showing you how to install the Rhino-Rack Vortex Aero Roof Rack System on our 2021 Ford F-150. So with the F-150, obviously we have a good amount of bed space, but if you wanna get something longer or larger up there and maybe couple this with like a ladder rack to give some longer loads like a ladder or a lumber or on the sports and rec side, maybe you have a larger kayak you wanna get where you need it to go, a roof rack system like this one is gonna be a great solution for you. So let's take a closer look. The roof rack is going to have a weight capacity of 165 pounds. It's going to fit on our roof with the fit kit that we'll show you in the installed portion.
But 165 is gonna be a pretty solid or pretty common number that you see with roof racks like this, which is gonna be fine for most of the things you wanna get up there. You just wanna double check and make sure that your roof weight rating is in that same ballpark. Make sure you know what each of those are and go by the lowest ready component just to be safe. The crossbars we have on our system right now are gonna be 59", which is a solid length. We stay pretty much well within the width of our vehicle overall.
They're going to be elliptical so they taper on both ends to cut down on some of that wind noise and drag. But anytime you put something up on the roof, you're gonna deal with that. Luckily, we also do have a vortex strip on the top which is how the bars get their name. So that's going to help again cut down on some of that wind noise, otherwise we just have that open channel up here. Speaking of that channel though, that's gonna be great for your T-track accessories.
If you have those, you can slide those in. But with the strip you are going to have to trim it up if you wanna leave this strip in with those accessories on. So it's not a horrible idea to just grab another strip if you want to, in the event that you do end up doing some trimming. On our end cap here, we do have a plastic lock which we can use to unlock or lock our end cap but you can upgrade those to metal if you'd like. On the underside, you do have the option to use a measurement strip that you are gonna trim up and put wherever your towers are not.
In our case, this is just for demonstration and we'll talk a little bit more about that in the install portion as well, but that'll cut down on that whistling noise underneath as well. And using the provided key, we can take our end cap off and just show you how that works. So it's just a metal lock core there that will expose our fit kit hardware. So as long as our end cap is on and it's also locked up, no one is going to be able to access your fit kit hardware and remove the rack from your roof. From here I'm just gonna get a quick measurement to give you an idea of how much height you're going to be adding to your roof with the system. So from here in the middle, you're going to be looking at adding about 4-1/4" from the highest point. So if you're thinking about storing this in your garage, especially if you have something on there, add about 4-1/4" to whatever that's gonna be to find out whether or not it will fit in your garage or if you'll go anywhere where there might be some clearance issues. The roof rack system is gonna be made out of an anodized aluminum so it's gonna be really lightweight, easy to work with, but also very durable and rustproof at that point. It's got a nice matte black finish so it looks good. I think it fits the aesthetic of our F-150 really well. Overall, the install portion isn't too terribly difficult. It can be a little bit tricky, but you just need to be patient. Use the measurements that the instructions give you and make sure that you know where everything is gonna go. But if you need a little bit of help with that process, we'll walk you through it right now. To get started, the first thing we'd like to do is to slay everything out so that we know where and what it is. So we have our crossbars, we have towers, our fit kit, the clamps, and the hardware. We've got the pads and the bases for our towers. We have the tools and I would recommend picking up some kind of fabric tape measure as well as a regular tape measure. And then we have this measurement strip that comes included that we'll have to trim up according to our needs and definitely keep the instructions close by 'cause we will have to reference those often. But we'll begin by removing the end caps on our crossbars. We are going to use this plastic key to fit into the end cap. Just turn it and pull it out as long as we have it rotated fully, and we need to remove that in order to get our towers on. So we're going to line up this metal plate here with the underside, with the channel underneath our crossbars and just slide those on. And now is when you're gonna use that measurement strip. So for our case, ours has already been trimmed up so we can't use it effectively but you're gonna basically line it up with your tower, find the measurement on your instructions. In our case, we're looking for 169, so I'll get that roughly to where it needs to be. In your case, you could actually use the full measurement strip and trim it up if you need to. We repeated that process on the other side. We just slid our tower under this channel here and line it up according to the measurement, removed our end caps and now we just need to replace those real quick. Again, just put 'em on and tighten 'em down with the key. From here, since we're doing our front crossbar, just be sure to reference the instructions but we're going to attach one of our base pads to the rest of the base, and we wanna make sure you can see this arrow on here. We wanna make sure that ends up facing forward, so in our case, we're going to get these on and then we'll line it up with the tower. With the pad connected to the base, you can see where these openings are, and where they'll fit on our towers. So from here, again, we just wanna make sure that that arrow is facing forward, and we can snap this on into place. And then we're gonna repeat this process again on the other side. Once our towers are roughly in place, we're going to get a measurement. In your case, you could use the measurement strip. In our case, we would've to trim that up, and this is just for demonstration, so I'm gonna use our fabric tape measure to find that 169 millimeter mark in our case. And now I'm going to use the Allen key provided to tighten this down. As we tighten down, something important to note is that this tool does have a built-in torque spec, so just the way it's designed. Once we start turning, as soon as we see that line straightened out, that's about as tight as we want to go. Once we have our towers all set up, our measurements where we need 'em to be and both bases in place, now we can place our crossbars roughly on our roof, whereabout we think they're going to go. Just a matter of getting them roughly in place for now. And then we're gonna come back and get the measurement to make sure that they're in the right place. From here, again, since this is the front crossbar, I'm going to be using the measurement A in our case, which is 280 millimeters or 28 centimeters from the center of our door jam to the center of the tower. So in our case, I need to slide forward quite a bit. It's gonna be kind of hard to tell for now until I move the other one forward as well. So I'm gonna go to the other side and get that measurement now. Once we have everything in place and all our measurements are good, if your end caps are on, make sure we get those out of the way. If they're locked, go ahead and just use the provided key to unlock it. But now we're going to fit the bolt through this hole here on our clamp and make sure that it threads into that opening there inside our tower. Once you get the bolt here to start threading, it's probably gonna be easier just to use the tool to get it most of the way in. In our case, I'm gonna go to about 70, 75% here. I'm not gonna tighten it down all the way 'cause it might start pulling the whole system towards me, rather I'm gonna tighten this one down, and then I'm gonna go back to the other side, tighten that one down, come back and finish this one up, and then finish the other side up as well just to make sure everything's even as possible. Now that we've gone back to the other side and tighten that one down, I'm gonna finish tightening this bolt here. Again, just using this tool. Once it gets to the point where it straightens out, that's how you know we're at the desired torque. So I'm right about there now. All that's left to do is to replace our end caps and lock those up. So overall, if you're looking for a really effective way to extend your load space, whether that's getting some larger or longer items up on your roof, the Rhino-Rack Vortex Aero Roof Rack System is gonna be a great option for you. We just took a look at how to install it and how it fits on our 2021 Ford F-150.
Average Customer Rating: 4.7 out of 5 stars (1827 Customer Reviews)
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.i George from etrailer,
The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack.
I highly recommend this etrailer.
Hi George from etrailer,
The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack.
I highly recommend this etrailer.
I put 3 stars because its a useful functional non-harmful roof rack solution for my WRX sedan. This review lost 2 stars because the rubber top pieces get damaged upon any accessory removal or install like(bike, snowboard rails etc). Additionally, these accessories also look to be weathering quickly because of build quality. Hopefully this helps your decision! Thanks
Perfect. Low Profile, Looks Good. Solid Rack System. Had a year and Highly recommend
Work great. I have a CRV and am still able to tilt the moon roof with both them and an attachment. They do whistle a bit and make the drive louder when driving down the highway with the windows open. I don't have any previous crossbars to compare to, but it's not bad. Would definitely buy these again over the more expensive ones! With a full kit that was on sale the entire thing ended up being less than what I'd pay to have roof rails installed.
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
I bought this kit because I already owned a pair of Thule “square “ crossbars. When in place the rack is super solid. However, it has some issues. It is quite difficult to attach the legs to the base plate on the factory rails. It doesn’t click on and off. Quite annoying. A fiddly two person job. Also the wind noise is very noticeable. Also annoying.
Once installed the product is very sturdy and looks great. But the directions are hard to follow because of the separate components and would have been really tough without the video which was great. I have one problem, how can I eliminate the annoying wind sound when driving when nothing on the rack. I saw a video where wrapping a line around the crossbar can help. It has helped a lot but not completely. Is there another secret for this?
Great strength and look. I love em. About to put on the kayak racks and get some fishing going.
Used my rhino rack traveling thousands of miles over the past year. They are a great product for the price, no need to buy the expensive big name products. Highly recommend these roof racks.
I own a 2013 Honda CRV I purchased a couple months ago. It has a naked roof and no rack or side bars, and I wanted to be able to carry up to three kayaks. I didn't really want to buy and install the side bars, and then the cross bars also. I also needed the cross bars to be a little wider than the vehicle itself, as I own two Ocean Kayak Scupper Pros, and a Venus.
This Rhino Rack package looked like a great option for my needs. Weight wise, the three boats come right to the limit. Other racks had lower weight limits, and wouldn't work.
I had a couple issues with the initial package, but etrailer took care of the problem right away, and sent out what I needed.
Installation was pretty smooth. I recommend reading and rereading the instructions, before you cut anything. The videos on the etrailer website or directly on YouTube are very helpful to see all the steps. I'd like to see more personalized instructions added in the future, just to to make everything even smoother. Make sure you identify your vehicle and the bar you received on the kit instructions before you start.
These bars are so wonderful. The aero bars make no noise when driving and no whistling that I can tell. They don't seem to effect my gas mileage. I made sure the top rubber strips and bottom measurement strips were cut perfectly with no gaps, as this is important to prevent whistling.
They look so stylish. I get complements on them, and people can't believe they are after market, and that I installed them myself. They really complement the vehicle. Once installed the first time, I can take them off or put then back on in about 12 minutes. I don't really plan to take them off though. I don't use car washes, and I like the look of them on my vehicle.
I made sure to not overtighten them, and then tightened them a few times over the next week and with a couple kayaking trips. These babies are strong and I can't make them move when I test them. I still check them regularly to make sure they are secure, for safety purposes.
I highly recommend this Rhino Rack package. They know how to make the perfect roof rack and you can tell the quality and thought that went into them. Look at my photos I have included.
Thank you to etrailer for such great service. You made the whole process so pleasant and easy.
I give all 5 stars for the product and service, but...I prefer the parts to be all in one carboard, also I was a little panicking looking for blue plastic key...It was inside of cross-bar ??not falling out with strips. Anyway,
I"m owner of Honda cr-v 2022 with bare roof ,and I just installed the rack. Was it simple enough? Yes,so I can share this:
First, rubber pads are all the same, and after placements to plastic legs should be placed with arrow*out*-that is it(a lot of info regarding vertical parts, that they are all different)??
Second, on other hand, in video we informed that clamps are same -they are not. Bigger "hooks" are for rear bar, smaller ones-for the front one.
Third, do not expect precision in rubber pads position(especially on rear bar)regarding plastic rail strips on bare roof.it is not achievable, just try to make same look on both sides.
I was worried about rain and water gets inside. Well, let us see.
What I plan to care on rack? Just a small 6ft step ladder. Believe me or no CR-V is my business vehicle ,and ladder carry was the goal of rack purchase. And only question I have if I can get to underground parking with no problems to cross the front entries usually limited with 6 ft in heights I will find out soon, but rack height plus ladder on it makes me worry.??The review will be update soon. regards.
Superb fitment. Precisely fits the roof of your car giving me confidence lugging my canoe or car top carrier around. Reasonably priced. You can tell the feet were designed specifically for your car. I've recommended etrailer and this Rhino Racks to several friends. Installation is super easy too with included measuring tapes, stickers to always return the mounts to the same location, etc.
Not too hard of an install and it looks great! Highly recommend for a basic utility roof rack for your 23 Tacoma.
Look great, and function great. Just make sure you find all the parts packaged inside the rails themselves after you open the box!
Great rack for a great price. I tried an Amazon knock off, and that was a piece of junk. The Rhino rack is relatively easy to install, is very secure, and has lots of accessories.
Bought as part of a Rhino-Rack Aero bar roof rack. Built solid and assembled easily. The keyed locks work perfectly. If you do install these make sure you check the rack for looseness every so often or before a trip. It's easy to open the cover and tighten the bolt just to be sure.
I shopped online retailers namely Amazon and EBAY looking for the cross bar setup I would need for my 2012 Toyota Camry LE. My Camry has a naked roof. The whole experience was confusing. None of the needed components were combined together. I found each component listed separately but nothing to indicate they were the correct components for my car. Then ETRAILER.COM popped up in my search. I simply entered my car’s year, make, and model, and answered the question about the car roof (being naked with no factory installed cargo bars) and suddenly I had a list of the available cross bars for my vehicle with all the necessary components to install them. One or two clicks put the whole thing in my cart for purchase. ETRAILER .COM is your one stop shop. As a side note I purchased Yakima ski racks on sale to install on these cross bars. Another customer asked if these ski racks would fit his car and I explained yes they will with the appropriate cross bars. I sent him to “ETRAILER.COM” so he could get the correct setup. Pictures forthcoming.
For the honda fit the Rhino rack system is the only rack that will fit. Because the Rhino rack is a one size fits all it is complex and fiddly. I would not recommend it unless there were no other options available.
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
These crossbars are perfect! I have a Pelican Cargo Box that I put on the rack when I'm traveling and it is 100% secure. They are pretty noisy, especially when driving perpendicular to the wind direction, but I expected that considering they are sitting on top of a tall truck. The rubber pieces that fit into the tracks are still in good shape and haven't cracked or loosened. They look good on my all black truck, too.
I purchased a full kit for my 2017 Ford explorer, connectors, Feet and these cross bars. I will use them for hauling my roof top box on trips as well as other things that will not fit in my vehicle. The install is farily simple however some of the tools provided for tightening are not the best. Luckily I had a number of other tools to get this complete. The main thing I feel is needed is a socket allen key to tighten down the cross bars nice and tight. The allen key provided is difficult to work with and get the leverage you need to snug the bars down.
Another tip is to be sure to use the excess measuring closure to close off the inside of underside of the bars. Use a box cutter to cut the excess and fit it to the inside. I read some reviews about noise and I have zero noticeable noise. Do not tighten the bars down until you have this all inserted in and slid under the feet. Then snug it all down. If you do these things and close all the gaps the bars are almost silent.
The bars look great on the vehicle and seem very sturdy and solid. I would have no reservations hauling ladders, lumber and all of the typical stuff you see on roof racks. The rubber strips are heavy duty and add a nice non slip feel to the top of the bars.
I've been using my Rhino-Rack primarily for hauling up to two kayaks. It has performed very. On the particular trip we are on now we went thru some pretty high winds blowing from the side of our rig and the kayak stayed secured. I would highly recommend this for anything you want to carry on top of your vehicle.
Very nice bars that I mounted on a 2019 Highlander. I have owned multiple vehicles with Thule square and Yakima round bars that were noisy. These are so quiet I don’t know they are there. Very sturdy, and the rubber insert helps to keep load from sliding.
Fairly easy to install onto my 2017 Honda CR-V. The crossbars feel very sturdy and are securely attached to the vehicle. Took me about 30 minutes to get it installed and could be done even quicker if you get help from another person. The bars themselves are a little fat so my Thule ski rack has a super tight fit. There is very minimal wind noise, so I'll probably be getting a fairing for that. The instructions felt a bit jumbled but with just the measurements alone, you can install it with a bit of common sense.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.