bing tracking image
  1. RV Sewer Hose Fittings
  2. Valterra
  3. Sewer Adapters
  4. Sewer Couplers and Nipples
  5. Reducer Couplers
  6. 1-1/2 Inch Diameter
Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub
Valterra

Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub

Part Number: T1041-1
In Stock
$9.11
Retail:$15.62
You Save: 42%
RV Sewer Hose Fittings
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
This eccentric tank reducer converts a 3" tank outlet to an 1-1/2" opening for a gray-water tank. 3" Spigot mounts directly in tank outlet or slides into sewer pipe. 1-1/2" Hub slides over sewer pipe. Great Prices for the best rv sewer hose fittings from Valterra. Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub part number T1041-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (187)
  • Q & A (0)
  • Videos (1)
  • Photos

Valterra RV Sewer Hose Fittings - T1041-1

Highlights

  • Versatile Eccentric Reducer: Converts 3" tank outlet to a 1-1/2" opening ideal for gray-water tanks.
  • Direct Tank Mounting: 3" Spigot fits into a tank outlet or sewer pipe; 1-1/2" Hub fits over sewer pipe.
  • Durable Material: Made from ABS plastic ensuring long-lasting reliability and performance.
  • Reduces Clogs: No lip where it changes sides, allowing smooth gray-water flow.
  • Multi-Purpose Use: Suitable for reducing sewer pipes; perfect for DIY or RV projects.
  • Secure Installation: Requires ABS Solvent Cement for a leak-free, secure fit.

Features to know about

Effortless Gray Water Management: Eccentric Tank Reducer Capability

Transform your RV's gray water management with the Valterra Eccentric Tank Reducer. Designed to convert a 3" tank outlet to a 1-1/2" opening, this adapter is perfect for simplifying your plumbing system. The 3" spigot mounts directly into the tank outlet or slides into a sewer pipe, with the 1-1/2" hub fitting snugly over the sewer pipe. It's an ideal solution for maintaining efficient waste water flow, ensuring every drop is directed where it needs to go.

Reliable Installation with Absolute Precision: Dual Size Compatibility

Experience a seamless installation with the precision-crafted dual-size compatibility of the Valterra Eccentric Tank Reducer. Whether you need to adapt a 3" sewer pipe to a 1-1/2" size or fit it within varying tank openings, this reducer is designed for perfect fitment. Crafted with ABS plastic, it requires only a simple touch of ABS solvent cement to secure it in place, allowing for a one-time installation so you can focus on your journeys, not your plumbing.

Seamless RV Integration: Universal Design for Everyday Use

Perfect for both seasoned RV enthusiasts and weekend warriors, this adapter ensures compatibility with a wide range of gray water systems. Its universal design fits directly in the outlet or slides into standard sewer pipes, making it a versatile addition to any RV setup. Easily integrate the Valterra Eccentric Tank Reducer into your plumbing, and keep the water flowing smoothly, no matter the model or make of your camper.

Hassle-Free Maintenance and Durability: Built to Last with ABS Plastic

Beat the wear and tear of travel with the robust construction of the Valterra Eccentric Tank Reducer. Made from durable ABS plastic, this reducer withstands constant use without compromising integrity or performance. Enjoy peace of mind on the road knowing your equipment is designed to last—weather-tight and leakproof, it’s a reliable fixture for any RV plumbing system.

Simple, No-Stress Installation: User-Friendly Mounting

Forget complex installations! The Valterra Eccentric Tank Reducer is designed with ease in mind. It requires just a touch of ABS solvent cement and slides into place without hassle. Secure your plumbing quickly and effectively, making more time for the adventures you seek. With its user-friendly mounting, this reducer minimizes setup time while maximizing reliability.

T1041-1 Valterra Eccentric Tank Reducer - Motorhome Gray Water - 3" Spigot to 1-1/2" Hub




California residents: click here


Video of Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Complete Breakdown of the Valterra Eccentric Tank Reducer

Hello everybody, this is Jeff at etrailer.com. Today we gonna take a look at the Valterra RV gray-water eccentric tank reducer. Now, this eccentric tank reducer will convert a three-inch tank outlet to a 1-1/2 inch opening for a gray-water tank. This can also be used to reduce a three-inch sewer pipe to a 1-1/2 inch pipe. The three-inch spigot end right here will mount directly in your tank outlet, or slide over a three-inch sewer pipe. The overall diameter on this end is 3-1/2 inches.

The inside diameter, where the pipe will slide in, is right at three-inches. On the other end, the hub side, the overall diameter on this is 2-1/4 inches. And the inside diameter is right about 1-7/8 inches. So, this will fit over 1-1/2 inch size sewer pipe. Now to connect this, it does require ABS solid cement for installation.

And that solid cement, we do sell separately on our website. But that should do it for the review on this Valterra RV gray-water eccentric tank reducer..

Customer Satisfaction Score:

Ratings & Reviews

4.8

187 reviews
This eccentric tank reducer converts a 3" tank outlet to an 1-1/2" opening for a gray-water tank. 3" Spigot mounts directly in tank outlet or slides into sewer pipe. 1-1/2" Hub slides over sewer pipe.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Exactly what I was looking for and very fast delivery



by:

Great quality product



by:

Worked exactly as intended.



by:



by:

worked exactly as I wanted and have had no problems at all.



by:

Looks like it will work fine and it fits well.



by:

These products are well constructed and the customer service are impeccable.



by:

Fits well



by:

I needed a very special part for my home plumbing that was available from etrailer. I ordered 3 pieces and was very impressed by etrailer’s entire order process from initial order to shipping to delivery and subsequent follow-up. Although this item was not for an RV, Inplan to order any parts needed for my motorhome from this customer-focused company.



by:

The product is great just what I ordered. The only problem was that it took about three weeks to get it delivered.



by:

Just what I needed together with the Valterra valve and threaded connector I also bought from etrailer it worked well for my project



by:

after xmas to easter trailer build, very happy with everything i got from etrailer, inside and outside showers, 2nd toilet, 2nd cook and cleanup area, out of the weather garage for utv and motorcycle, added freezer to our travels, running off solar, still alot of work ahead, not done with you guys yet, thanks for your great resource!


25
187
Show More Reviews

See what our Experts say about this Valterra RV Sewer Hose Fittings

  • Removing and Installing Valterra Eccentric Tank Reducer # T1041-1
    The Valterra Eccentric Tank Reducer, part # T1041-1, is installed with cement. When you reinstall the new one use # A05-0303. The cement is permanent so you're not going to be able to break it up. Instead you need to cut the pipes after removing the hose clamps. Then replace it with the new one and apply the new cement. The same cement can be used on other plumbing parts as well.
    view full answer...
    Image 1 for
  • Removal and Installation of Valterra Gray Water Tank Reducer
    In most cases the Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub # T1041-1 is going to be attached to the gray water tank with an ABS solvent like # A05-0303, so it will need to be cut off in order to replace it.
    view full answer...
  • 1-1/2 inch Fitting to 3 inch Bayonet Fitting Adapter
    Hey Chris. The Valterra RV Sewer Termination Adapter - 3" Lug Fitting to 3" Hub item # T1029-2 and the Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub item # T1041-1 are exactly what you need to connect to the Camco Revolution RV Sewer Hose Kit w/ Swivel Fittings item # CAM39625. You'll want to use the solvent cement item # 3447530889 to complete the installation and prevent leaks. If you have any additional questions, go ahead and click on the box below that...
    view full answer...
  • Fittings Needed To Expand 1-1/2" Sewer Pipe To 3" Pipe
    To widen your 1-1/2" pipe to 3" using the Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub # T1041-1 you would first need the Valterra DWV Adapter for RV Sewer System - ABS Plastic - 1-1/2" Hub to FPT # D50-2922 to screw onto your current fitting. The # T1041-1 would then slide over the 1-1/2" hub fitting of the # D50-2922 allowing you to connect a 3" pipe to your sewer system. Between these two fittings you'll want to use some ABS Solvent Cement # A05-0303 to...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • What Kind of Sealant is Used to Install Valterra Eccentric Tank Reducer # T1041-1
    To attach the Valterra Eccentric Tank Reducer # T1041-1 to the rest of the plumbing on the RV and prevent leaks use the Valterra ABS Solvent Cement # A05-0303. It was made for exactly this purpose!
    view full answer...
    Image 1 for
  • What Bonding Agent Should Be Used To Attach RV Sewer Pipe Fittings
    Unfortunately just looking at a picture isn't going to be enough for me to identify what the manufacturer used to glue the 3" pipe reducer # T1041-1 to the other fitting, however I can tell you that you should use some ABS # A05-0303 when you're ready to hook up your new pipe reducer.
    view full answer...
    Image 1 for
  • Replacement Gray Water Tank Reducer Adapter from 3 Inch to 1-1/2 Inch
    It sounds like you are looking for the Valterra Eccentric Tank Reducer part # T1041-1 which installs in an RV gray water tank with with 3" diameter opening and then reduces this down to 1-1/2". The adapter will install inside the neck on the tank and then secured with gasket maker part # LT37467 and a band clamp part # H03-0009. In order to replace the waste valves you can then use the Double RV Waste Valves part # T80A depending on your setup. Please note, you'll also need the Valterra...
    view full answer...
  • What is the Difference Between Valterra EZ Valve Electric Waste Valves # E85-8 and # E84-8
    The difference between the Valterra EZ Valve Electric Waste Valves # E85-8 and # E84-8 is the design of the center output tube. On # E85-8 it's a straight, regular hub. On # E84-8 the center tube has bayonet fittings. Based on your pictures you would need # E84-8. However, the input size of either hub is 3 inches so your smaller tubes would not fit without adapting to the tubing size you have up to a 3 inch mating tube to fit the E84-8. It looks like the smaller tubes are 1-1/2 inch (measure...
    view full answer...
    Image 1 for
  • Installing Valterra Eccentric Tank Reducer and RV Waste Valve to Gray Water Tank
    When installing the Valterra Eccentric Tank Reducer # T1041-1 to your existing tank with a 3" opening you will just need to use some ABS solvent cement like # A05-0303 for the attachment. This is also what you will use to add the LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N11AB48GMA to the fitting. You will want to coat the outside AND inside of each fitting with the solvent before connecting the components. What this does is actually cause a chemical reaction with the plastic...
    view full answer...
  • Recommended Adapter To Use 3" Valterra EZ Valve Electric Waste Valve On 1-1/2" Gray Water Tank
    Absolutely! To install the Valterra EZ Valve Electric Waste Valve # E40A-8 on your gray water tank with 1-1/2" pipe you can simply use the Valterra Eccentric Tank Reducer 3" Spigot to 1-1/2" Hub # T1041-1 on each side of the waste valve to convert the 3" openings to 1-1/2". The Valterra EZ Valve # E40A-8 includes a gray water switch plate for you to use as well. You will also need Valterra ABS Solvent Cement # A05-0303 for a strong leak free connection.
    view full answer...
  • How To Install Valterra Eccentric Tank Reducer
    The Valterra Eccentric Tank Reducer part # T1041-1 has a 3" spigot end which installs inside the neck on the waste water tank and then a 1-1/2" hub end which you would slide a pipe into. In order to secure the spigot end into the neck on the tank you will want to use some gasket maker part # LT37467 on the outside of the spigot fitting or on the inside of the water neck and then use a band clamp part # H03-0009 to clamp down on the waste water neck and hold the spigot fitting in place....
    view full answer...
  • 3 inch to 1-1/2 inch Reducer for RV Sewer Piping
    The adapter you need is the Valterra part # T1041-1 that you referenced as it fits your configuration needs. The 3 inch portion fits into the tank and then the 1-1/2 inch portion fits over the elbow fitting like you need. Rubber cement is basically not designed to be broken up though.
    view full answer...
    Image 1 for
  • Do RV Sewer Pipes Have to be Cut Completely Off When Removed and Reinstalled
    What's interesting about the ABS fittings of RV sewer pipes is that they have to be completely cut off and can't be cleaned or removed. It has to be completely cut off and everything has to be new.
    view full answer...
  • Changing A Waste Drain From 1-1/2 To 3
    What you can do is hook the Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub Item # T1041-1 onto your 1-1/2" pipe using some Valterra ABS Solvent Cement - 1/4 Pint Item # A05-0303 and a hose clamp. Next you'll hook in the Valterra RV Sewer Termination Adapter - 3" Lug Fitting to 3" Spigot Item # T1029-1 using some # A05-0303 and a hose clamp. If your hose has the bayonet end or if you have no end on the hose you can just hook it in as well using a hose clamp.
    view full answer...
  • Adapter for 3 RV Gray Water Tank Opening to 1-1/2 Pipe and Waste Valve
    From what I can gather it sounds to me like you need the Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub # T1041-1. The 3" Spigot mounts directly in the gray water tank outlet while the 1-1/2" Hub slides over sewer pipe. Then for a 1-1/2" diameter gray-water sewer pipe we have the LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank. This is valve is available in with cables that are numerous lengths, which I'll list for you so you can choose the...
    view full answer...
  • Gray Water Tank Reducer With 3.5" OD
    If I understand correctly, you need a reducer with an OD of 3.5". The 3" Spigot Valterra Eccentric Tank Reducer, # T1041-1 that you linked to is a 3.5" OD with a 3.0" ID measurement.
    view full answer...
  • Diameter of the Larger Side of the Valterra RV Sewer Hose Reducers T1041-1 and T1041-2
    If you check out the video link I attached you can see where our demo guy measures the larger side of the T10401-2 and it has an outer diameter of 3-1/2 inches and an inner diameter of 3 inches. Right at the 29 second mark you can see the ruler held up to the product so you know he isn't mistaken. That end is going to fit over a 3 inch sewer pipe like you mentioned.
    view full answer...
  • 3-1/2" Eccentric Tank Adapter With Installation Instructions
    The Valterra Eccentric Tank Reducer # T1041-1 is most likely what you're going to need, however it will be difficult to tell you what you need without knowing what you currently have. The Valterra Eccentric Tank Reducer # T1041-1 has a 3" spigot end that will install inside the neck of the waste water tank, and has a 1-1/2" hub end that you will slide your pipe into. You can use some gasket maker # LT37467 to secure the spigot end into the neck of the tank, and use a hose clamp # H03-0009...
    view full answer...
  • Parts Needed To Make 1-1/2" Waste Valve With 3" Bayonet Outlet
    I do have a way for you to get what you want, but that's not something that's made. You'll need a few parts: Waste Valve # T1001 Adapter # T1041-1 Bayonet Adapter # T1028 ABS Glue # A05-0303 You mentioned PVC but your 1-1/2" Grey water pipe should be black ABS plastic per RVIA regulations and not PVC however. You'll connect the waste valve to hub end to your existing pipe, the adapter to the other end of the waste valve, and the bayonet adapter to that adapter.
    view full answer...
  • Parts Needed For A 3" To 1.5" To 3/4" Black Tank To Grey Tank Conversion
    It sounds like you're going to need the Valterra Eccentric Tank Reducer # T1041-1 which will mount directly to your 3" spigot, while the 1-1/2" hub slides over the sewer pipe. Now you can connect to the Valterra Waste Valve for RV Gray Water Tank w/ Cap # T1001C, like you mention. From here, you can attach the Valterra Gray Water Drain Connector # T01-0094VP for the 3/4" hose connection, or you can use # T01-0091VP if you want a 90° angle 3/4" hose connection. We have various hoses...
    view full answer...
  • Upgrading To Electronically Controlled Waste Valves
    If you're wanting to have an electronically controlled valve for just the gray tank then you can use the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Hub to 3" Hub # E40B-8 along with a reducer # T1041-1 to make the connection between the valve and gray water pipe. There currently are no electronically controlled valves with a 1-1/2" opening so you'll have to use a black water tank valve to accomplish this. You could also use the Valterra EZ Valve Double Electric...
    view full answer...
  • Parts Needed To Connect A Drain Hose To The Gray Tank On A Food Truck
    Hola jaqueline, Si la válvula de compuerta es el final de la línea, entonces puede simplemente desatornillarla y quitar la brida exterior de su válvula de compuerta de 1-1/2" y reemplazarla con la pieza # T1008-1 y atornillarla en su lugar. A partir de ahí Puede atornillar la pieza # T01-0094VP y simplemente usar una manguera de jardín con rosca de 3/4" como la pieza # W01-4180 para conectarla a la salida y drenar el tanque. Si desea enviarme algunas fotos de su configuración, puedo echar...
    view full answer...
  • Is There a Valterra EZ Valve Double Electric Waste Valve for 3" and 1-1/2" Valves
    The Valterra EZ Valve Double Electric Waste Valves are only available in 3". If you have a 1/2" and 3" setup then you will need to upgrade to 3" in order to use one. I recommend part # E85-8 and then part # T1041-1. You'll also need part # A05-0303 to complete the swap along with some misc. pipe.
    view full answer...
  • What Normally Seals RV Sewer Pipes
    When replacing RV sewer lines you have to cut them totally off since the ABS cement is a permanent plastic weld. Then when you go to make new connections you end up having to replace anything that can't be separated. Or you can use adapters to fit into or over the old pipes and use solvent to make the connection. For solvent we have the part # 3447530889.
    view full answer...


< Previous
12



Do you have a question about this RV Sewer Hose Fitting?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Amy B
Written by:
Amy B
Employee Wilson B
Updated by:
Wilson B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<