LaSalle Bristol Long Sweep Elbow Fitting for RV Sewer System - ABS Plastic - 90 Degree - 1-1/2"

Video Transcript for Review of LaSalle Bristol RV Sewer Connectors and Fittings - Long Sweep Elbow - 344632276

Ellen: Hey everyone, I'm Ellen here at etrailer.com, and today we're going to be taking a look at the LaSalle Bristol Sweep Elbow fitting. This is going to be a more gradual 90 degree fitting for your pipes, which is always important whenever you're trying to connect your sewer pipes together, you don't want it to be at a sharp angle because things can get clogged up in the elbow. So this is going to be a more gradual angle for us so we can connect our two pipes together and continue on with our sewer fittings, or our sewer pipes.This connects to a one and a half inch diameter pipe, same on the other side. It's even printed on there, might be kind of hard to see, but it's going to fit over the one and a half inch pipes on either side. Again, it's going to be a 90 degree fitting, so it's going to change directions from horizontal to vertical, or vice versa, or go around a corner, or wherever we need it to go.It's made of a sturdy ABS plastic construction, so that's really good at resisting any kind of shock and abrasion damage. You will want to use some ABS solvent cement to attach this properly, you can find that right here at etrailer.com, it's going to be a related product on the page here.

So check that out to make sure that your pipe is sealed up nice and tight and there's no leaks.That's pretty much all there is to it for this elbow fitting. If you need any other fittings for your RV, or anything else like valves and other stuff for your sewer system, or any other accessories for your RV in general, we do have a lot of options here at etrailer.com, so please check them out. Thanks for watching.