This sewer spigot bolts onto your gray-water waste valve. 1-1/2" Spigot slides into gray-water waste pipe and secures with ABS solvent bond (A05-0303 - sold separately).
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Valterra RV Sewer Spigot with flange for your half inch sewer pipe. This is an ABS plastic sewer spigot that's going to connect your sewer pipe to your gray water waste valve. This does have a 1 1/2 inch inner diameter spigot that's gonna slide into your gray water waste pipe and will secure with some ABS solvent bond, you can find that here at etrailer.com using that part number you see on the screen if you don't already have some for yourself. Then the flange is going to bolt on to your gray water waste valve, the hardware to get that bolted in place is not included. But just to give you a few measurements here, make sure this is gonna work for you, you can see we've got that about inch and a half inner diameter, our outer diameter is about an inch and 7/8, just shy of two inches, our flange is gonna be about 2 7/8 by 2 7/8.
Our mounting holes there are spaced about 2 3/4, or sorry, 2 1/2 inches apart in both directions. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com, thanks for watching.
Unequaled excelent service.
Do you have a question about this RV Sewer Hose Fitting?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.