Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2"
(45 reviews)
Price: $284.39
In Stock
Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2"
Item # C13701
Retail:$415.95
Our Price: $284.39
You Save: $131.56
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (45)
- Q & A (0)
- Photos
CURT RV and Camper Hitch - C13701
- Frame Mount Hitch
- 18 - 51 Inch Wide Frame
- Bolt-On
- Weld-On
- 2 Inch Hitch
- CURT
Adjustable trailer receiver hitch is designed for use on RVs and can be bolted to the vehicle frame or welded on for a no-drill application. Provides a 2" drop to fit your application. Powder coated steel is sturdy and corrosion resistant.
Features:
- Universal hitch designed for use on RVs and motorhomes
- Heavy duty frame side brackets are separate parts to allow you maximum adjustability
- Frame brackets with hitch tube mounts slide along hitch body to match exactly the width of your vehicle frame before being secured in place
- Versatile brackets are able to be used on various vehicle frame styles - Box frame, C-Channel frame, or I-Beam frame
- Separate frame brackets allow you to position the tube mounts toward the front or rear, putting the hitch body in the best location for clearance
- Black powder coat finish resists rust and corrosion
- Strong, secure all-frame attachment
- Solid construction for maximum strength and safety
- Hardware is included
- Assembled in the USA
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 5,000 lbs
- Drop: 2"
- Frame width:
- Minimum: 18"
- Maximum 51"
- Bracket thickness: 1/4"
- Limited lifetime warranty
Notes:
- Any accessory used with this hitch much be approved for use with RVs.
- If welding this hitch, all welding surfaces must be cleaned to bare metal or weld will not be the required strength and may void the warranty.
- The main hitch body tube can be trimmed so the ends are flush with the frame brackets. After trimming, coat the bare metal with paint to protect against rust and corrosion.
13701 Curt Class 3 Adjustable Width Trailer Hitch Receiver for RVs - 18" to 51" Wide - 2" Drop
Installation Details
Tech Tip
Product may be welded on for a no-drill application, or you may drill holes and use as bolt-on application
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" - C13701
Average Customer Rating: 4.6 out of 5 stars (45 Customer Reviews)
Adjustable trailer receiver hitch is designed for use on RVs and can be bolted to the vehicle frame or welded on for a no-drill application. Provides a 2" drop to fit your application. Powder coated steel is sturdy and corrosion resistant.by: William05/01/2018
I've used Curt products before and this one did not disappoint. The packaging however was not up to the task. The box was open and I immediately started inspecting for damages and missing parts, thankfully the packer from etrailer completely wrapped the loose parts in reinforced tape and everything was there.
by: Calvin06/13/2018
The hitch that we ordered was shipped the day of our order and came very quickly. The installation process was simple and worked very well on our bus. This gives us the capability to tow a small trailer to carry our luggage for the youth conferences that our teens attend throughout the year.
by: Keith 12/02/2023
Got it, looks like everything is there, the box didn't hold up to well to the ups shipping, typical, a smaller box packed with foam and bubble wrap may work better
by: Mike 09/24/2018
Well built product. Easy install, took about 1 hour mostly for drilling holes. Be sure you have at least 2 brill bits for each size required.
by: Bill L.10/19/2015
Received quickly and was just what I needed to solve my storage needs. Looking forward to putting it on my 5th wheel in the coming weeks.
Bill L.
10/18/2016
Worked great for the application needed.
by: Theo08/27/2015
Ordered this to retro fit a Class III hitch on a '63 Willys truck. So far it works perfectly. Was able to attach it directly to the frame and not lose any functionality. Also ordered C45791 Hitch extender and won't need it with this setup. All parts were included and the install instructions were clean. eTrailer also did a great job of assisting with the order to ensure that it got to me as quickly was possible.
by: Jason10/11/2017
I actually ordered the wrong hitch; however, gave to a friend that needed one. He likes it. I ordered the same hitch but the 71 or 72 inch span. Had to customize the mounting to the fifth wheel camper as the camper had electric stabilizers installed. Anyway, works well, tow an 18ft deep V boat behind camper.
by: Robert10/07/2020
Had it welded to the back of my pull trailer to hold a wire rack. Holds my camping chairs and dog enclosures, works great
by: Don 08/08/2021
Hitch worked out great. Mounted it on the back of my 5th wheel. Use it to tow a Kubota RTV or my dog trailer.
by: Keith08/04/2018
Delivery was fast.The mirrors worked out great .Easy install on my 1967 Galaxie.Trans cooler was a pretty quick installation really good instructions.The trailer hitch required a bit of work but was definitely worth it ! I'm 70 years old and didn't have a difficult time with these products.Will definitely use your products again.
by: James 07/18/2022
Bought this to put on the back of my fifth wheel for bikes and the product is well made and instructions were good.
by: Rick08/17/2017
I received the hitch on time and installed it with no problems at all.
Thanks!
Rick
8/17/2018
Our hitch has worked great! We pull our Jeep Wrangler behind or class A gas motorhome without any issues.
by: 06/09/2023
Good hitch easy install just drill some holes and bolt it on.
by: Dale 09/25/2022
Very pleased with this hitch, it fits my Thomas HDX bus with very little modification. only had to drill two additional holes in the frame. extreamly rugged and up for the job.
by: Douglas 12/02/2019
Had looked for a hitch to fit a 36 inch plate on my converted bus/ rv. Found this one that is adjustable on etrailer.com. I ordered and received in great packaging. Very quick turn around from order to receiving. Thank-you!
by: William12/07/2022
We are very happy with the hitch, etc we purchased from you . Worked out well, and you folks were very helpful. Thank you!
by: Marco 02/21/2023
Parts were as described, delivered promptly, and installed easily!
by: Barry L08/23/2018
Excellent service
Cathy knew just what I needed for my rv
Shipping two days unbelievable now that's fast
Great price for the product I ordered
Thanks again Cathy and etrailer
Will be back and my friends
by: Drew 06/12/2020
Product was as advertised, great!
Dena was particularly helpful and friendly.
Wish I needed more trailer parts, will use them in the future!
by: Douglas09/20/2018
Very heavy duty bolt on application, just make sure you have 9/16 and 11/16 bits.
If not add another $35 to your project.
I Like it.
by: Rick06/17/2019
Purchased this for a 1977 GMC coachman 24' Motor Home. Was not able to bolt on with out a bit of metal fabrication. Great product.
by: David h03/27/2017
Adjustable hitch everything there supposed to b and got it quickly very pleased
by: Tom G05/16/2020
Great product and super service at a fair price
Tom G.
5/17/2021
Perfect! No issues
by: Jason 08/20/2022
I found the product to meet every expec tation.
by: Steve 08/25/2020
Looks good, exactly what I was expecting, can't wait to install it. Give it 4 stars only because the packaging broke open in shipment and I had to count allthe pieces to make sure they were there
25
45
Show More Reviews
See what our Experts say about this CURT RV and Camper Hitch
- Will The Curt Adjustable Trailer Hitch Receiver # C13701 Fit a 1984 Westfalia Vanagon Unfortunately we don't have 1984 Westfalia Vanagon available to confirm fitment of the Curt Adjustable Trailer Hitch Receiver, # C13701. But this can adjust from 18" to 51" so as to adapt to multiple applications. This of course would require the drilling of holes to mount. Or it can be welded in place too. The Curt Adjustable Trailer Hitch Receiver, # C13701 has a 2" drop, is a Class III hitch with a 2" receiver that is rated for 5,000 lbs GTW (gross trailer weight) and 500 lbs TW...
view full answer... - What RV Hitch do you Recommend for my Highland Open Range 328BHSFor you Open Range 328BHS I really like the Curt Adjustable Trailer Hitch Receiver part # C13701. It is as you requested designed to bolt on to the frame of your camper and will allow you to use the cargo carrier or bike rack that you have. It offers a 500 lb. tongue weight rating to get your gear where you need it safely.
view full answer... - Frame-Mounted RV Hitch for 2016 Keystone PassportA frame-mounted hitch for your Keystone Passport is a much better option than a bumper-mount type, both for stability and for weight capacity. We offer several frame-mount RV hitches with capacities up to 500-lbs of tongue weight. All such items are shown on the linked page. The key is checking your trailer's frame width to find the best match and the required capacity. We also have some with drop, such as Curt # C13701 which has its 2-inch receiver 2-inches below the crosstube.
view full answer... - How to Determine if a Camper Trailer Can Tow a Small Boat TrailerMost likely you would be fine since it looks like you have a solid square bumper that is welded to your trailer frame, but you really would need to contact the trailer manufacturer to determine if your trailer is rated for towing and what it's towing capacities would be. You also will need to check the local DOT in your area to make sure you can tow two trailers.
view full answer...
- Trailer Hitch for 2017 Keystone Carbon 357You will need to measure the distance between the side stanchions on your 2017 Keystone Carbon 357 to determine fit. The Curt Adjustable Trailer Hitch Receiver, # C13701 is for frames that are 18" to 51" in width. This is designed to work on box frames, C channel frames, or I beam frames and will fit most frames. This is a Class III hitch with a 2" receiver and has a lifetime warranty which speaks to its durability.
view full answer...
- How Far Apart Front to Back are Bolt Holes on Curt Adjustable Trailer Hitch 13701I spoke with my contact at Curt and found that front to back the bolt holes for adjustable hitch # C13701 are 8-5/8 inches apart on center. I have also included a link to the installation instructions for you to view.
view full answer...
- Recommended Hitch for my 2009 Blue Bird Micro Bus on a 2009 Ford E-450 ChassisI have a good solution but there are no custom fit trailer hitches available to match your 2009 E-450 Chassis. Instead the Curt Adjustable Trailer Hitch Receiver part # C13701 is what I recommend. While it does not carry a Class 4 or 5 classification it is the highest rated option I have for your chassis. It offers you a 500 lb. tongue weight rating and a 5,000 lb. gross trailer weight rating with out weight distribution. With weight distribution it offers a 600 lb. TW and 6,000 lb. GTW rating.
view full answer... - Recommended Trailer Hitch Receiver for a 1990 P32 RV ChassisI do have options for you but none of which I would recommend as an exact fit because the aftermarket trailer hitch manufacturers we carry (Draw-Tite/Curt) do not make hitches that are designed to fit specific RV chassis's. The only options I can offer you are universal like the Curt Adjustable Trailer Hitch Receiver part # C13701. This hitch fits frames spaced between 18" and 52" apart. It has a 5,000 max gross trailer trailer weight (GTW) and 500 max tongue weight (TW) rating. It comes...
view full answer... - Hitch Availability for my 2013 Chevrolet Express 4500We have a solution but we do not carry a custom fit trailer hitch for the 2013 Chevrolet Express 4500. I have checked with the manufacturers and they do not offer an option. The Curt Adjustable Trailer Hitch Receiver part # C13701 can however solve your problem. Theis is an adjustable hitch that you can attach to the frame of the Express 4500 to get a 2" receiver on the back rated for 500 lb. of tongue weight and 5,000 lbs. of gross trailer weight.
view full answer... - Recommended Hitch for a 2004 Safari Trek Motorhome on a Chevy P32 Workhorse ChassisTo add a hitch to your 2004 Safari Trek Motorhome you'll want to use the Curt Adjustable Trailer Hitch item # C13701. This is a class III hitch with a 2" receiver that has the requested 5,000 lbs towing capacity. This is a universal hitch that can be bolted or welded onto your Workhorse's frame. There are no custom fit options for your motorhome. Just a heads up. We have a had a similar question related to your 64-6230 Hidden Hitch that we have reached out to Draw-Tite on. According to...
view full answer...
- Trailer Hitch Receiver Recommendation For A Club Car 411 Mini TruckYou going to need to measure the distance been the frame rails of your Club Car 411 Mini Truck to find the frame width. The Curt Adjustable Trailer Hitch Receiver # C13701 will fit an 18" to 51" frame width and is our smallest option available. If your frame distance is smaller than 18" then we will not have an option for you. This hitch is a bolt-on or weld-on design and features a black powder coat finish to resist rust and corrosion.
view full answer... - Recommended Trailer Hitch for a 1950's Chevy TruckThe best trailer hitch option we offer for a 1950's Chevy is likely the Adjustable Width Trailer Hitch Receiver part # C13701. The side plates fit a number of different frame types, they can be adjusted on the crosstube, and the depth of the receiver drop should be enough for a truck bumper. It has a 2" receiver with 5,000 lb capacity.
view full answer... - Adjustable Hitch Receiver and Towing Set up for 1996 Cadillac Fleetwood HearseI have a solution for you but a custom fit hitch for your 1996 Cadillac Fleetwood Hearse is not an option. The Curt Adjustable Trailer Hitch Receiver item # C13701 is a class III hitch that is adjustable to fit vehicle frames from 18 to 51 inches wide. It has a capacity of 5,000 lbs and has a 2 inch receiver. It requires no welding and all hardware to install is included.
view full answer... - Recommended 5th Wheel Trailer Hitch Receiver for Flat Towing a VehicleThe best option we have for your 2008 Keystone Montana 3585sa is the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701. This has a towing capacity of 5,000 lbs, so as long as your car has a GVWR less than 5,000 lbs you can use it in this manner. If you'd like recommendations to get your flat towing system for your car, let me know the year, make and model and I'd be happy to assist.
view full answer... - What Hitch do You Recommend for My 1962 Cadillac DeVille Convertable?I have a creative solution for you. Unfortunately, we do not carry a customized-fit option for a hitch on your 1962 Cadillac DeVille convertable. The only option we have is to use a universal hitch like the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide # C13701. The Curt universal hitch comes with adjustable brackets that will fit frames between 18-51 inches wide. In order to make sure that your frame falls within these dimensions, I recommend that you measure your frame (from side...
view full answer... - Can Mounting Brackets of Curt Hitch C13701 Attach Vertically to Trailer FrameThe crosstube of the Curt hitch part # C13701 is perfectly square so if you wanted to mount the brackets vertically like you mentioned you could. This is a universal style hitch that was designed to allow for this type of flexibility.
view full answer... - Could Riverside Retro 157 have Curt Trailer Hitch # C13701 InstalledIf the frame of your trailer is between 18 inches and 51 inches and fits the standard trailer frame designs of Box frame, C-Channel frame, or I-Beam frame so as long as your Riverside Retro 157 matches that criteria the hitch # C13701 will fit and work well. This hitch can be welded on as well.
view full answer... - Can a 5th Wheel King Pin Be Converted to a Rear Trailer Hitch Towable Trailer?The job boxes on your 2005 Ram 2500 will either need to be removed or if your trailer is tall enough for a level ride above them a 5th wheel hitch with a higher height setting could be used. I've linked the page to all your options to assist. There is not a conversion available for a 5th wheel trailer or gooseneck trailer to a traditional rear trailer hitch and ball mount as the hitch weight of that size trailer is normally exceeding a rear mounted hitch capacity because the style of...
view full answer... - Can I Add a Trailer Hitch to Tow a Utility Trailer With My Keystone Cougar Fifth Wheel Since hitches for trailers are not custom fit you can simply filter through the linked page that has our selection of trailer hitches on it. You will just need to make sure that the fit specs for the hitch match up with that of your 2007 Keystone RV Cougar 289BHS. One of the most popular options is the Curt Adjustable Width Trailer Hitch Receiver # C13701 which is a Class III receiver that has a 2" receiver opening. This trailer hitch is compatible with trailers that has a frame width...
view full answer... - Towing Capacity for 1983 Skyline Class C Motorhome With C30 EngineYour photos didn't come through, but I think I can help with some information you provided. Your 1983 Skyline Motorhome does not have a specified towing rating that I can find. So, it sounds like you would be restricted by the total towing capacity of the hitch. The strongest RV hitch we have is the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701 which has a max towing capacity of 5,000 lbs or 6,000 lbs when using weight distribution. This is...
view full answer... - Dimensions Of The Curt Adjustable Trailer Hitch Receiver Part # C13701I went out to our warehouse for you and took some measurements on the Curt Adjustable Trailer Hitch Receiver part # C13701. The distance from the outer ends of the crossbar is 51" long. The mounting brackets have a bolt hole to bolt hole measurement of 8-1/2". The side mounting plate is 2" from the top of the crossbar to the top of the bracket and the distance from the top of the receiver to the top of the crossbar is 2-3/8". I have attached a picture with these measurements for your review.
view full answer...
- Is There a Hitch for a 1991 Toyota Hiace Super Custom LH107As long as the van features a box, C-channel, or I-beam frame and its width is between 18 and 51 inches, the Curt Class III, part # C13701, can work. However, looking at your picture, I honestly cannot say if this will work for you since I do not know what is under the panel of your 1991 Toyota Hiace Custom Van. I recommend removing the panel and checking for one of the options above first to ensure that this is possible since the only references to hitches for your vehicle online are...
view full answer...
- Is There a Front Mount Hitch for a 2012 Hyundai Santa FeTo install a front hitch on your 2012 Hyundai Santa Fe you'll need to use a universal kit like the Curt Adjustable Trailer Hitch Receiver # C13701 since there are no custom fit options available. This hitch fits 18"-51" wide vehicle frames and features a 2" drop and a 2" receiver which fits basically anything you'll be putting at the front of your vehicle. Aside from this you'll have to take your vehicle to a shop and have them custom fabricate something for your vehicle.
view full answer... - Trailer Hitch to Carry Mobility Scooter on the Back of a 2014 Keystone CougarCurt trailer hitch # C13701 is one option. It will fit frame widths from 18 inches to 51 inches. Frame width is measured from the outside of one frame rail to the outside of the other. This hitch is rated for 500 pounds tongue weight so it can handle the combined 400 pounds of the scooter and carrier. I recommend first checking the underside of your Keystone Cougar to determine if this hitch will fit or if any modification will need to be done in order for this or any hitch to fit. If...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Laura H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William
5/14/2018
All set up, ready to roll. etrailer got me everything I needed hitch to brake control. Thank you your customer service was great!