Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - White
(206 reviews)
Price: $63.07
In Stock
Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - White
Item # V3092-601-00
Retail:$87.14
Our Price: $63.07
You Save: 28%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (206)
- Q & A (0)
- Photos
Ventline RV Vents and Fans - V3092-601-00
- Vent
- Roof Vent
- No Fan
- 14W x 14L Inch
- White
- Ventline
- Plastic
Open this roof vent quickly and easily with the gear-free, spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Screen snaps out for easy cleaning. Installation kit and garnish sold separately.
Features:
- Roof vent allows fresh air to enter and heat to escape while your RV, camper, or enclosed trailer remains locked and secure
- Easy-to-use handle lets you quickly open and close the vent from inside your RV
- Spring-loaded handle locks into 10 different positions
- No gears - opens vent faster than a standard crank handle or hand knob
- Ergonomic T-shape is easy to grip
- Aerodynamic, wedge-shaped dome (or lid) is made of durable white polypropylene
- Translucent dome allows some light through
- Polar white screen snaps out for easy cleaning
- Vinyl weather seal helps keep water out when vent is closed
- Manual lift design - no need for electrical wiring
- White, 1/4" thick mounting flange is built in
- UV-resistant, long-lasting specialty polymer plastic construction
- Smooth edges won't cut you during installation
- Works well with all roofing materials
- Interior trim piece (or garnish) and installation kit sold separately
- 4 Mounting points on flange allow for installation of a vent cover (sold separately)
- Made in the USA
Specs:
- Rough opening size: 14-1/4" wide x 14-1/4" long
- Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long
- Vent extends above roof:
- 4" When closed
- 9-1/2" When fully open
- Limited 2-year warranty
Spring-Loaded Handle on Ventline E-Z Lift Ventadome
The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV. Unlike a standard handle or knob that can take time to crank, the handle on this vent is spring loaded. Simply pull on the handle and move it into one of 10 positions to open the vent. Each position offers a different degree of opening, and the handle locks into place. Also, the handle's T-shape makes it easy to grip.
Integrated Mounting Points for Vent Cover
There are 4 mounting points built into the flange of this roof vent. These points allow you to install a vent cover (sold separately) over the roof vent.
Installation Instructions
Note: Interior trim piece (garnish) and installation kit with screws and sealant are sold separately.
- Mark desired location for vent. Be sure to choose a location between roof joists.
- Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
- Apply sealant to bottom of flange. Be sure to surround each screw hole.
- Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
- Mount to roof with #8 screws.
- Attach interior garnish piece with #8 screws.
V3092-601-00 Vent Line Easy Lift Ventadome RV Roof Vent - Manual - 14-1/4" x 14-1/4" - White
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - White - V3092-601-00
Average Customer Rating: 4.7 out of 5 stars (206 Customer Reviews)
Open this roof vent quickly and easily with the gear-free, spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Screen snaps out for easy cleaning. Installation kit and garnish sold separately.by: Gregg04/07/2024
Great service and delivery. This was the first top vent I had ever replaced. Salesman knew what I needed. Fit was perfect.
by: Stephanie 04/05/2024
Still working great. Easy to install.
by: Bill07/24/2023
The roof vent replacement process was easy. It fit like a glove, has never leaked, and operates superior to the original. I would not hesitate to order from etrailer again.
by: Dita M02/22/2019
My boyfriend and I are enjoying the benefits of the roof vent.
by: Frank 08/08/2023
The roof vent was a perfect replacement. Shipping was quick and I'm satisfied with the value.
by: Michael08/24/2021
love the EZ lift vent. etrailer is a pleasure to do business with. look no further for trailer parts, these guys are the best. pretty good install if I do say so myself.
by: Bobby 12/21/2023
great product and great service.
by: Wayne 10/27/2023
Paula is great! She followed up with me after the product was delivered. Customer service is top notch! Thank you
by: Todd 10/06/2022
I loved that they were shipped the next day and arrived as promised. My installer had no trouble replacing the old Roof Vent. It fit perfectly. And I love "Manual Lift" as opposed to the old "knob." I just wish the plastic was a little heavier or thicker. And to my surprise, the Roof Vent was not packaged in a box. It was simply included with the other part I ordered in the larger shipping box. No instructions or hardware. They weren't needed but surprised they weren't included.
by: Nancy02/09/2017
Haven't yet installed the new rv roof vent, but am already impressed with the way it is made. Especially the rim touching the roof. Its made flat and looks like it will adhere very well with the caulk. I also like the opening mechanism which is different than older ones.
Nancy C.
2/12/2018
Great. Thank you for this product. And pleased with your service!
by: Sean K03/13/2023
The vent was exactly what I needed for the RV, a perfect match. Replacing the old vent with this item was very simple and easy. New always looks better!
by: Brad 09/16/2023
Fast n easy
by: Robert 07/08/2022
If you have the OLD type of vent with an aluminum frame, you may have experienced that framework degrading over the years. This frame doesn't degrade and retains a good weather seal. Fantastic product!
by: Gary09/09/2022
Service was fantastic. Amy walked me through a change to my order and saved me having to place a second order, saved me extra shipping charges and was able to expedite the whole order. It was so great to have a real person to talk to and understand. Thank you Amy.
by: Mike Mo09/12/2016
This item is for my WW cargo trailer (6' X 12'), in hopes that it will provide a little light and somewhere for the very hot air to go. Last month we had almost two weeks of over 100 degree heat. It looks like it is going to be just what I need for some relief. Thanks for asking. Mike Mo
by: Lorie 10/06/2021
Even though the part was not for our "vintage" of pop up trailer, it was easy to install, looks great, and we now have a working vent with no cracks, breaks, or tears in the screen.
by: Ernie Moyer08/09/2016
Ordered a replacement roof vent for my enclosed trailer. Quality is better than original ( original had no locking mechanism to hold position..hit a bump and it was wide open ). Thanks again,etrailer, for a quality product and quick delivery .
by: Wayne 05/06/2023
The vent seems to be a quality item, lightweight and well made!
by: Kyle05/04/2020
Giving this 5 stars but have not installed the unit yet. It shipped quickly and arrived as expected. No instructions provided but can be found on etrailer website. No hardware provided as noted in the item listing.
by: Dustin05/03/2016
Nice all plastic vent. I bought this to replace an old metal vent in my 21' travel trailer. The product was easy to install, the interior garnish sold separately fit nicely as well.
by: Loren03/25/2018
Works great. Excellent replacement for the old one.
Loren
3/25/2019
Still very pleased with the purchase etrailer is the first place I go when I need trailer related items.
by: Robert01/11/2019
The vent cover assemblies arrived in a timely manner and in great condition. The quality of the products are better than anticipated. These vents will take the place of two that are 10 years old and 100,000 miles of traveling all over the U.S.A. like the all plastic assembly as my old vents were beginning to show wear and tear.
by: Mariann03/28/2023
Great transaction
by: Craig 05/08/2020
Just installed this vent cover this morning. It fit perfectly and will work great on my 1963 camper. Thank you very much.
by: Scott L10/22/2022
All plastic use caution using after it sits in the sun a while
25
201
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- Are Replacement Springs Clips Available For A Ventline Ventadome Roof VentI went ahead and checked to see if we carry any replacement spring clips for your Ventline Ventadome trailer vent, and unfortunately that is not offered as a replacement. Ventline has confirmed in the past that in order to get new spring clips you'd need a full replacement lid like the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00.
view full answer... - Simple RV Roof Vent Solution for Enclosed Interstate TrailerThe Ventline Ventadome EZ Lift part # V3092-601-00 would be a great option James. This is a basic RV roof vent with a manual raise lid like you are looking for.
view full answer... - Recommended Replacement 14-1/4" x 14-1/4" Vents For Horse TrailerWe can definitely help with this. I suggest either the Ventline Ventadome Trailer Roof Vent, # V2110SP-24 that is a manual lift vent with a metal lid. Or, the Ventline E-Z Lift Ventadome Trailer Roof Vent, # V3092-601-00 which is also a manual lift but has a translucent white lid that allows some light to come through. Both are typical 14-1/4" x 14-1/4" size so should be a perfect fit for your situation. Please note the product review videos linked below along with an installation...
view full answer... - Which Vent Cover To Use with Ventline E-Z Lift Ventadome # V3092-601-00 For a vent cover to use with the Ventline E-Z Lift Ventadome # V3092-601-00 so that you can attach to the four mounting brackets of the vent you would want to use one specifically designed for it. For that you would want the MaxxAir Cover part # MA00-933066.
view full answer... - Replacement Dome for Ventline E-Z Lift Ventadome Trailer Roof Vent If the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part # BVE0108-03. This dome is designed to fit # V3092-601-00, # V3092-603-00, # V3094-601-00, # V3094-601-00C, # V3094-603-00, and # V3094-603-00C vents.
view full answer... - Are Fan Add-On Kits Available For Ventline Ventadome Non-Powered RV Roof Vents There isn't an add-on fan kit available for your Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00, but you could still get the motor and fan blade from their 12v models and try to attach it to the support for the lift arm. The motor # BVD0218-00C comes with a bracket you can screw into the support and then attach the fan blade # BVC0466. You can run this to your nearby 12v power source and install a switch to turn the motor on and off. This is going to require a bit of DIY work...
view full answer... - Replacement Vent for 14-1/4 x 14-1/4 Vent OpeningYou mentioned needing a vent cover but asked about the E-Z lift vent itself, the Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - White # V3092-601-00, so it sounds like you need the actual vent. And yes, that vent will work for you so long as you have the standard 14" x 14" or 14-1/4" x 14-1/4" vent opening on your motorhome. I recommend taking a quick measurement to see what the opening size is just to verify but it should be that size so you can use...
view full answer... - Solution to Add Vent for Motorhome with Broken Northern Breeze Vent ScreenThe correct replacement screen for your Northern Breeze vent is part BVDO231-00 but this was discontinued awhile back so I recommend replacing your whole vent to a newer model. The nice thing about roof vents is they all fit the same standard 14"x14" opening so finding a replacement is really easy. If you want motorless vent I recommend the Ventline E-Z Lift which comes with either a White Cover # V3092-601-00 or a Smoke Cover # V3092-603-00. For something a bit nicer I recommend checking...
view full answer... - Recommended White RV Non-Powered Roof Vent I may have an option for you, but there I was unable to find any information on a 22.5" x 22.5" RV roof vent. The closest option we have is to install a standard RV roof vent like the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00 which is a non-powered roof vent, and the install the Camco Aero-Flo RV Roof Vent Cover w/ Swing Open Lid - White # CAM40421. The # CAM40421 will install to the frame of the roof vent and measures 22-1/2" x 20" and is the closest size we have to...
view full answer... - Replacement Ventline vdo449a Roof Vent ClipI checked with Ventline and they longer provide the Replacement Spring Clip for Ventline Ventadome # VD0453-00vd0453-00 spring clip and we no longer sell them either. That said a full replacement lid like the Replacement Dome for Ventline Ventadome Trailer Roof Vent # BVD0449-A01 or a vent like the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00 are also options available instead.
view full answer... - Types Of Sealant Needed For Various Sealing Needs On A Trailer For anything vertical that you're trying to seal or if you're under the trailer sealing and don't want the sealant to drip down you'll need Non-Sag Sealant for RVs # 344270341437-1. For anything on top of the trailer that you need to seal, like a roof vent, you'll want Self-Leveling Sealant # 34427034145-1 since it will spread out a bit and provide better coverage.
view full answer... - Solution for Hard to Reach RV Roof Vent LeverHey Roy, unless you wanted to come up with a way to fabricate a longer lever there isn't a solution for a longer one we can really help with. It's probably too expensive to be worth it but you could offer her a sweet pink stool to stand on to help her reach it though with the part # SASS-07C-P...
view full answer... - Replacement Roof Vent Lid For A 1996 Itasca Spirit MotorhomeThe MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335001 does not have the slide bar in the middle, however, this vent lid will fit any roof vent on the market today and will fit your 1996 Itasca Spirit motorhome. We do also have the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00 or # V2092SP-28 if you do not need a fan. These do have the option with the slide bar. If you are able to provide a serial number or a model number and I can see...
view full answer...
- Recommended Vent Cover for Ventline E-Z Lift Ventadome Trailer Roof VentFor the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00, I recommend the MaxxAir Standard RV and Trailer Roof Vent Cover - 19" x 18-1/2" x 9-1/2" - White # MA00-933066. This cover will allow for full vent function and also allow the vent to be open when traveling or camping in the rain. This is also available in smoke # MA00-933067. These covers will not require any additional mounting location but utilize the vent itself.
view full answer... - Is There An Upgrade For a Ventline E-Z Ventadome Trailer Roof Vent? I have some bad news for you Alex. The reason you are having trouble finding an upgrade for your Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00 is because none exist. This is because the fan and all the bracing are mounted to the top section of the vent since the lower section is only a garnish to cover the hole in the roof. The MaxxFan Deluxe Roof Vent # MA00-07000K is my favorite replacement option as it is all electric and is easily controlled from the wireless remote....
view full answer... - Roof Air Vent for a Thin Fiberglass Truck CamperYou can use a vent like the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00 that you referenced but you'll have to add some form of framing to ensure that the vent is installed correctly. This is the case for any of your roof vents for your application. I am attaching a video of our team installing the MaxxFan Deluxe # MA00-06200K on a 2018 Nissan NV 2500 that you can use as a reference for your installation. The framing that you see in this video can be applied to your camper...
view full answer...
- Is There a Replacement Lid for Ventline Northern Breeze VentThe vent you have is a Ventline Northern Breeze, and the replacement lids have been discontinued for these vents. You do have an option if you like, which is to try a universal lid, the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335001. Otherwise, I recommend just replacing the vent altogether, and there are a number of options. For a standard roof vent you can use the Ventline Ventadome Trailer Roof Vent # V2092SP-28 or Ventline E-Z Lift Ventadome Trailer...
view full answer... - Shortest Garnish for the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00The shortest garnish pieces that will fit the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00 have a 1-1/8" leg. These come in Birch White # VA0445-25 and Polar White # VA0445-33. i have attached a review video for you to reference.
view full answer... - Determining The Correct Roof Vent For A Gladiator Cargo Trailer RV roof vents are typically all 14" x 14" and require a 14-1/4" x 14-1/4" hole to install. Manufacturers have started prepping enclosed trailers with frame work to support a vent installation but I can't confirm whether or not your Gladiator Cargo Trailer will have this already. If you don't already have frame work giving you a 14-1/4" x 14-1/4" space for the vent then you'll need to mark one out on the ceiling and cut into it and will most likely need build some frame work to support...
view full answer... - What Measurement is Needed to Replace Trailer VentNot a saint, but I should still be able to help you out! I believe you are asking about a standard square roof vent on your trailer, and you really just need to know two things - the size of the cut out of the vent opening and the (approximate) depth of the opening. Good news is, square trailer vents are almost always a standard 14-1/4" x 14-1/4" (give or take a smidge), so that's likely what you have, but you'll want to verify. If if is, you can use either a vent without a fan or a vent...
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Kathleen M
Updated by:
Isabelle B
Installed by:
Cole B
Installed by:
John A
Written by:
Amy B
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dita M.
2/24/2020
It is still going strong, and we have installed another roof vent in my own van in the later part of 2019. Pictures are still in the process of being uploaded with another review.