Shortest Garnish for the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00

Question

Question:

I need the thinnest trim piece for a fiberglass roof

asked by: Carl R

1

Helpful Expert Reply:

The shortest garnish pieces that will fit the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00 have a 1-1/8" leg. These come in Birch White # VA0445-25 and Polar White # VA0445-33.

i have attached a review video for you to reference.

expert reply by: Jon G

1

Answer 1

When you're looking to replace a 14 x 14 roof vent, the depth you'll need will depend on the distance from the ceiling to the top of the roof, or the roof thickness. For instance, the #V3092-603-00 Ventline roof vent wouldn't include the…

view full answer...

Answer 2

To pick out the correct garnish length you need to measure the thickness of the roof on your trailer. The part #VA0445-28 is a 4-1/8 inch tall garnish. It looks like you have a part #V2092SP-28 installed and it would be easiest to just use this as a…

view full answer...

Answer 3

The Ventline product you reviewed, part #V2092SP-28, is a complete vent assembly intended for a rough roof opening of 14-1/4 x 14-1/4 inches. It consists of a wedge-shaped white plastic dome attached to a galvanized steel frame with hand-crank…

view full answer...

Answer 4

Based on the pictures you provided it looks like you have an older Ventline manual vent with a fan so the Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan #V3094-601-00 you were looking at would just be the newest version and would make a…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 7

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 10

Hey Michael! The 2026 Kia Sportage Hybrid has the 12V battery integrated into the main battery so you won't be making a connection there. What you need to do is run the #C59236 hot lead to the 12V positive jump terminal under the hood. Everything…

view full answer...

Answer 11

That's a great question, John! Yes, you can use the etrailer Replacement Fabric #e26QV in place of the Solera Replacement Fabric #LCV000334415. They are both made to work on the same size awning, so the fabric will be the same size and will…

view full answer...

Answer 12

Hi Ray! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 11.5K to 14K Trailers #MR74MV can definitely be used in a short bed 3/4 ton pickup, like your 2024 Ram 2500. Just be aware that not all trailers have a tapered nose and you may not get…

view full answer...

Shortest Garnish for the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching