See what our Experts say about this Rhino Rack Roof Rack

• Higher Weight Capacity Ladder Rack that Fits 2019 Ford F-250
  Since your plan is to install the Retrax PowerTrax Pro XR # RTT-80384 if you have a long bed or # RTT-80383 for if you have a short bed all you'd need to install a Yakima OverHaul HD part # Y01151-58 ladder rack which has a 500 lb capacity would be the adapter # Y01155 and that would be covered. Now if you do need more weight capacity the TracRac sliding ladder racks like the # TH43003XT-785 for short bed or # TH43003XT-000 for a long bed and these do have a weight capacity of 1,250 lbs....
  view full answer...
• Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
  The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets # RRRCB-RSHB-RJHB as an example. That's the purpose of the name, and the advantage of the rack. This rack is made up of the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars: # RB1375 Qty 2 Rhino-Rack Quick Mount Legs: # RRRLT600 Qty 4 Roof Rack Leg Spacer Blocks: # RRQMHD05-2 Qty...
  view full answer...
• Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
  You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
  view full answer...
  
• Roof Rack Recommendation for 2019 Hyundai Elantra and iKamper
  For a 2019 Hyundai Elantra with a naked roof, I suggest the Thule SquareBar Evo Crossbars, 53" Long, # TH712400. These will mount to a GT model with or without a glass roof using using the Evo clamp feet, # TH710501 and the fit kit, # TH145112. Or, if you have a sedan, use the Evo clamp feet, # TH710501 and the fit kit, # TH145069. These crossbars have a weight capacity of 220 lbs. The weight a roof rack can support is also limited by the roof capacity for the vehicle, this is outlined...
  view full answer...
• Roof Rack Recommendation For 2005 Scion xB
  I understand how it can be a bit confusing so I will do what I can to help out. We do offer several different roof racks that are designed to fit your 2005 Scion xB. The main differences you will find are due to the design of the crossbars. Square crossbars can be quite a lot noisier than some of the more aerodynamic crossbars we offer. For a nice roof rack for your vehicle, I recommend the Rhino-Rack RS 2500 Roof Rack for Naked Roofs, part # RRRS434B. This system has aerodynamic aluminum...
  view full answer...
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• 2017 Hyundai Santa Fe Sport with Panoramic Sunroof and Flush Rails
  Rhino Rack does offer roof racks that fit the low profile flush rails you have on the roof of your 2017 Hyundai Santa Fe Sport with the part numbers # RRVA137B-2 and # RRSX032 but the HD bar kit you mentioned would only fit the versions of your vehicle without the flush rails. This is an aero bar style rack too which means you'd have minimal wind noise as well as better fuel mileage. The sunroof you have won't be an issue for sure when it's closed, but Rhino Rack recommends checking for...
  view full answer...
• Roof Rack, Canoe Carrier and Bike Carrier for 2007 Ford Edge w/ Panoramic Roof
  The Rhino Rack Heavy Duty Crossbar Roof Rack, which consists of the # RB1375 crossbars, the # RRRLKHD roof rack legs and the # DK228 clamp kit would be a fit for a 2007 Ford Edge. You'll want to be careful about opening the sunroof with the roof rack in place. The rack or accessories mounted on it might interfere with the operation of the sunroof. Although the crossbars themselves have a 140 lb weight capacity, you might be limited by the roof capacity of the vehicle if it's capacity...
  view full answer...
• Would Two Sets of Rhino Rack Heavy Duty Bars Double Roof Rack Capacity
  You would be doubling the weight capacity of the roof rack components of the setup but most likely you'd be limited by the roof capacity as the HD Rhino Rack roof rack components do have a capacity of 220 lbs. You'd need a set of tracks like the part # RTC16, four sets of the feet part # RLT500, and two sets of the 65 inch Rhino Rack bars part # RB1650B-2.
  view full answer...
• Roof Rack / Crossbar Options For 2020 Ford Escape With Or Without Existing Rails
  I have a solution for you, however, my contact at Rhino-Rack confirmed that the Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1375 is not compatible with your 2020 Ford Escape. It looks like you have a naked/bare roof, in which case you will want to use Rhino-Rack # RR86TB. This kit comes with everything necessary for installation and is going to be your best option for your vehicle with the naked roof and no factory rails of any kind. This setup has a weight capacity of 165lbs and comes...
  view full answer...
• What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
  According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
  view full answer...
• Roof Rack Recommendation for a 2007 Chevy Avalanche for Transporting Ladder
  For your 2004 Chevy Avalanche the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 has been confirmed as a fit and would work well. Your sunroof wouldn't be an issue either. I would recommend keeping it closed since it will be very loud transporting a ladder up there from the wind noise. However, I have a better solution for you in terms of a roof rack for securing a ladder. Instead I would recommend the Rhino Rack HD bar roof rack part numbers # RB1375, # RRRLKHD,...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2011 GMC Sierra 3500 Crew Cab with Naked Roof
  For your 2011 GMC Sierra 3500 Crew Cab with a naked roof, the Rhino-Rack Heavy-Duty Roof Rack referenced in your question is indeed confirmed to fit the roof of your truck. This system consists of # RB1375 for the two 54 inch Heavy-Duty Crossbars, # RRRLKHD for the 2500 Series Legs, and # DK227 for the Custom DK Fit Kit. This system will provide you with extremely durable aluminum crossbars with built-in C-channels for mounting Rhino-Rack, contractor-grade accessories. The bars themselves...
  view full answer...
• Can Low Rider Towers Fit on Truck Cap Tracks for 2007 Chevrolet Silverado
  Yakima's discontinued Low Rider towers hooked onto raised side rails and then clamped onto crossbars. If you already have these towers, they do not fit the Yakima 60" Tracks for Roof Racks # Y01135 as these are horizontal track systems and not raised side rails. If you're looking for tracks for your truck, I can recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long # RTC18 along with Track Mount RLTP Legs # RLTP and Rhino-Rack Heavy-Duty Roof Rack Crossbars -...
  view full answer...
• Recommended Roof Rack For A 2012 GMC Sierra W/ Extended Cab On A Naked Roof
  I do have a roof rack option that will fit your 2012 GMC Sierra Extended Cab. Unfortunately, it will not be a Thule Rack because the fit kit has been discontinued. I do have a Rhino-Rack alternative that has a maximum weight capacity of 130 lbs with their heavy duty crossbar. This rack will consist of the following items: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 54" Long - Qty 2, part # RB1375 Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting...
  view full answer...
• Roof Rack Recommendation for a 2015 Hyundai Santa Fe Sport with Naked Roof
  The factory side rails on vehicles usually can't be installed on models that did not originally come with them but that would be a question best handled by a Hyundai dealer who will then probably steer you towards an aftermarket roof rack. So we can cut out the middle man and go right to an aftermarket roof rack. The addition of the clamps on a roof rack does not add any extra wind noise compare to models that don't have a clamp style roof rack. In fact, it is entirely possible, even likely,...
  view full answer...
• Roof Rack Mounted Fork Mount Bike Rack Recommendations for a 2016 Toyota Highlander
  A popular roof rack mounted bike rack, fork mount, that is very stable is the Rhino-Rack MountainTrail # RBC035. This carrier is also compatible with disc brakes, accommodates bike wheels up to 3" in diameter, and uses a 9mm skewer. I have linked a video review of this carrier for you. If your bike has a through-axle then I recommend the Yakima HighSpeed, # Y02115. It is designed to hold a bike with a 12-mm, 15-mm, or 20-mm thru-axle fork without an adapter. I have linked a video review...
  view full answer...
• Rhino Rack Roof Rack Fit for 2013 Ford Escape
  To install the Rhino Rack Heavy Duty Crossbars on your 2013 Ford Escape you will want to use crossbars # RB1375, leg kit # RRRLKHD, and custom clamps and pads # DK375. If you are interested in the Rhino Rack Aero Crossbars, use # RRVA137B-2, # RRRLKVA, and # DK375. I have attached an installation video of the Rhino Rack aero crossbars on a 2013 Ford Escape for you.
  view full answer...
• Does the Rhino-Rack HD Crossbars # RB1375 Fit a 2021 Nissan Sentra?
  I have a great alternative for you. Unfortunately, the Rhino-Rack Heavy Duty Crossbars # RB1375 will not fit your 2021 Nissan Sentra. For heavy-duty bars that are confirmed to fit your 2021 Nissan Sentra with a bare roof, I recommend the following parts: - Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541 -...
  view full answer...
• Will Rhino Rack HD Roof Rack Fit 2012 Honda CR-V with Moon Roof
  The Rhino Rack HD Roof Rack part numbers # RB1375, # RRRLKHD, and # DK284 is a confirmed fit for your 2012 Honda CR-V. It will fit your vehicle with the moonroof, but if your moonroof angles up when opening it could potentially interfere with the bars. You should note that crossbars typically add quite a bit of wind noise. You won't end up wanting to have the moonroof open with the bars installed as it will be quite noisy.
  view full answer...
• Roof Rack, Bike Rack, and Trailer Hitch Recommendations for a 2015 Ford Transit Connect
  You can add a roof rack to your 2015 Ford Transit Connect. If your van does not have the factory side rails then I recommend a Rhino-Rack roof rack using the following parts: Vortex bars # RRVA137B-2 Feet # RRRLKVA Fit kit # DK417 If you prefer the heavy duty rectangular bars then you would need bars # RB1375, legs # RRRLKHD, and fit kit # DK417. For any roof rack check the vehicle owner's manual or with Ford to determine the capacity of the van roof and go by whichever is lower. For...
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Do Parts of Rhino Rack Roof Rack From 2012 Ford Escape Fit 2014 Ford F-150 SuperCrew Cab?
  I checked with Rhino Rack and the square bar roof racks that fit a 2012 Ford Escape and 2014 Ford F-150 do share the same # RRRLKHD 2500 Series legs which are for HD crossbars, so if that's what you have you would be able to use those legs on your F-150. If you have different legs there is NOT going to be a fit. Apart from that you are correct that you would need new crossbars and a new fit kit. The correct crossbars for the '14 F-150 would be the Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Are Feet and Fit Kit Available for Rhino Rack HD Rack RR28DP for Silverado
  Hey Jonathon, we do have just the replacement feet of the # RR28DP available with the part # RRRLKHD and the fit kit # DK427. I'd definitely brag to your wife how much money you saved just getting the feet and reusing your current bars haha.
  view full answer...
• Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
  The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
  view full answer...
  
• Recommended No-Drill Roof Rack System To Attach A Rhino Rack Pioneer Platform On 2017 Ram 1500
  To attach the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" Wide # RR42113BF to your 2017 Ram 1500 Crew Cab without drilling you'll need to first install the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 2 # RB1500B-2, Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK043. This system will clamp onto...
  view full answer...
• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Which Heavy Duty Crossbar Setup Should I Use On My 2015 Ford F-350 Super Duty?
  I am showing that the correct Rhino-Rack heavy duty crossbar setup for your 2015 Ford F-350 crew cab is Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2. You will also need Leg Kit # RRRLKHD and Fit Kit # DK190 to install this onto your roof. This has a 165lb weigh capacity and is 59" long. You can install accessories by clamping onto the crossbars or by using the T-slot track. I have attached an installation video showing this roof rack being installed on a different...
  view full answer...
• Can I Carry Two Kayaks Side by Side on My Roof Rack?
  The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
  view full answer...
• Will the Rhino-Rack Heavy-Duty Roof Rack Fit 2015 Ram 1500 Crew Cab with Sunroof
  Yes, the Rhino-Rack Heavy-Duty Roof Rack, which consists of parts # RB1500, # RRRLKHD, and # DK043, will fit your 2015 Ram 1500 crew cab with a sunroof. Placement of the crossbars is very specific and I have included an attachment which illustrates the measurements for your Ram, as well as the measurement process. With these measurements you will be able to determine exactly where the crossbars will sit in comparison to your sunroof.
  view full answer...
  
• How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
  Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
  view full answer...
• Ladder Rack Recommendation for Camper Shell on 2002 Toyota Tacoma
  We have just what you need. For a rack system that will attach to the camper shell you have installed on your 2002 Toyota Tacoma the TraRac CapRac part # TH29200XT is a confirmed fit and would work well. This is a fixed rack that attaches directly to the cap. See picture. I also attached an install video link for you to check out as well.
  view full answer...
  
• Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
  I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• Dual Kayak Carrier For 2017 Ram 1500 With Tonneau Cover
  I would recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500, the Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK043. I've included a video to help you install if you wanted to go that route. Then the most cost effective carrier would be four of the Malone Rack Pads # MPG314, two per crossbar. The foam pads will be less rough on your kayaks whenever you're going down gravel roads....
  view full answer...
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• How to Mount Putco 40 LED Light Bar on 2006 Honda Ridgeline
  The Putco Luminix Off-Road LED Light Bar # P10040 is a fit for your 2006 Honda Ridgeline as long as you have the Bumper Mounting Bracket # P2255 installed, yes. In order to install something without modifying anything on your Ridgeline we'll have to install a roof rack, like the Rhino-Rack HD model listed below, and then use same-brand LED light mounting brackets like what we find with part # RR43174. 59" HD Crossbars - # RB1500B-2 2500 Series Legs - # RRRLKHD Fit Kit - # DK155 Since...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Sturdy Roof Rack Recommendation for 2008 Chevy Cobalt
  For a vehicle like your 2008 Chevy Cobalt I would not want to recommend a track style of rack as the best option. The tracks aren't going to flex enough to fit well and the clamp style racks are much sturdier than one might think so even though that's not the option you listed wanting it would be your overall best option still. Rhino Rack does offer a heavy duty roof rack that fits your vehicle with the # RB1250, # RRRLKHD, and # DK181 if you have a sedan or part # DK182 for a coupe but...
  view full answer...
• Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
  The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
  view full answer...
  
• Height Added to Vehicle with Rhino Rack Foot # RRRLKHD
  We've had a similar question to this in the past and we've found that the Rhino Rack HD roof racks that use the feet part # RRRLKHD and also part # RB1500B-2, # RRRLKHD add right at 4-1/2 inches of additional height that would mean the feet without the bar would be a little less than 3 inches in overall height.
  view full answer...
• Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
  A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
  view full answer...
• Recommended Bike Rack and Ladder Rack or Roof Rack for Fishing Kayaks on 2002 Chevy 2500 6.5 Bed
  The # Y01118 can mount to your Weather Guard toolbox. I recommend using the sealant # LT37467 to make sure your toolbox remains water tight at the mounting holes. For your roof rack I recommend the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 # RRVA165B-2, the 2500 Series Legs # RRRLKVA, and the Fit Kit # DK227. These bars will be longer than usual which you will need for two fishing kayaks. Then for your carrier, I recommend the Rhino-Rack Nautic 581 Rear...
  view full answer...
  
• Roof Rack For 2004 Chevy Silverado
  There are no Yakima roof racks that fit a 2004 Chevy Silverado, and as such no fit kits. The only manufacturer who makes a roof rack for your '04 Silverado is Rhino-Rack, and only if you have a Crew Cab or Extended Cab. If that's okay with you, here are the parts needed for a complete roof rack for your truck: - Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # DK227
  view full answer...
• Transporting 2 Kayaks while Pulling Trailer with 2014 GMC Sierra 2500
  As you referenced in your question, there are a variety of potential options for transporting your kayaks while towing an enclosed trailer with your 2014 GMC Sierra 2500. To avoid any possible interference issues and concerns regarding the integrity of a dual hitch for this application, I recommend going with a complete roof rack system on your Sierra. This will also allow you to still use your dual hitch for a bike rack as you mentioned. The Rhino-Rack Aero Bar Roof Rack, which consists...
  view full answer...
• Replacement M365 Pads Needed from the Rhino-Rack Fit Kit # DK227
  Sorry to hear about your pads! I went ahead and called my tech at Rhino-Rack to see if they had replacements of the M365 pads you need. While they do have those pads, the only way to get them is by purchasing another fit kit # DK227. They do not sell the M365 pads individually from the rest of the fit kit.
  view full answer...
  
• Roof Rack for Installing Cargo Basket for a 2011 Chevy Silverado
  There are roof racks for your truck that clamp to the door frames so that you would not have to drill the roof of your truck. For that the Rhino Rack parts # RRVA137B-2, # RRRLKVA, and # DK227 would be a confirmed fit for your 2011 Chevy Silverado Crew Cab. Once installed the Loadwarrior part # Y07070 would fit and work well.
  view full answer...
• Recommended Roof Rack for a 2005 Chevy Avalanche w/ a Naked Roof
  The best roof rack for your 2005 Chevy Avalanche with a naked roof is going to be the roof rack by Rhino-Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # RRVA137B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs - Qty 4 item # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item # DK227 This aero bar roof rack system has a 165 lbs capacity. The included locks...
  view full answer...
• Recommended Roof Rack And Kayak Carriers For 2013 Chevrolet Silverado Crew Cab
  The roof rack I recommend for your 2013 Silverado is the Rhino-Rack roof rack. This system has Vortex aero 54 inch crossbars # RRVA137B-2, feet # RRRLKVA, and the custom fit kit # DK227 that attach to the truck doorframe. The kayak carrier I recommend is the Yakima JayLow Folding J-Style Kayak Carrier, part # Y04073. This kayak carrier is a side load and has a built-in ramp that helps you load your kayak easier. This carrier comes with tie-downs and also with locks that secure the carrier...
  view full answer...
• Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
  A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
  view full answer...
• Recommended Roof Rack Setup to Transport 2 Canoes on a 2010 Chevrolet Silverado 1500 Crew Cab
  I can help outfit your 2010 Chevy Silverado 1500 Crew Cab to transport your 2 canoes. First let's start with the roof rack designed to custom fit your Crew Cab roof. The fit kit is part number # DK227, this will attach to the # RRRLKVA legs to provide the base for your cross bar. The recommended cross bar is 54 inches long but since you need a minimum of 66 inches the closest size to that is the 71 inch cross bars # RRVA180S, you will need three total cross bars, two for your roof and...
  view full answer...
• Is There a Rhino Rack Backbone System for a 2011 GMC Sierra
  I do have some great roof rack options for a 2011 GMC Sierra but there is not a Rhino Rack Backbone System for this vehicle. Instead, I recommend a traditional clamp-on roof rack like the Rhino-Rack Vortex Aero Crossbar System part # RRVA137B-2, part # RRRLKVA, and part # DK227. There are no permanent options.
  view full answer...
• How to Transport 2 Kayaks While Towing 5th Wheel Trailer with 2007 Chevy Silverado Classic 2500HD
  You definitely can carry your kayaks on top of your 2007 Chevy Silverado 2500 HD Classic while towing your 5th wheel camper - this is actually a pretty common thing! For a roof rack I recommend the Rhino-Rack Vortex System, parts # RRVA137B-2, # RRRLKVA, and # DK227, which gives you a mounting point for the etrailer J-Style Kayak Carrier # e98878 which is the kayak carrier I recommend. You will need to get 1 for each boat using this carrier. We do have some carriers that allow you to load...
  view full answer...
• Roof Rack for 2014 Chevy Silverado 2500 that Could Have Tepui Tent Installed
  I looked up the Tepui Tents and they basically attach to roof rack crossbars like the Rhino Rack roof rack part numbers # RB1375B-2, # RRRLKHD, and # DK227 that you referenced. The only issue you may encounter is that this rack has a weight capacity of 130 lbs.
  view full answer...
• Solution for Preventing Wind Noise of Rhino Rack Roof Rack on Chevy Avalanche
  Roof racks like the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 generally add a bit of wind noise since the bars are on top of the vehicle where the wind is the most prevalent. You will want to make sure the rubber strips are in position on the top and bottom of the bars. We have also found that if you install a fairing like the part # RRRF4 on the front crossbar you can divert the wind over the bars and prevent the biggest portion of wind noise.
  view full answer...
• Availability of Yakima Q-Clips for 2008 GMC Sierra Crew Cab Roof Rack
  We have a few roof rack options for you but the Yakima rack with Q-Clips has been discontinued and is no longer available for your truck. My recommendation for you is the Rhino-Rack consisting of the Vortex aero crossbars # RRVA137B-2, feet # RRRLKVA, and custom fit kit # DK227. This roof rack comes with the aero bars for less wind noise, a sleek look, and also comes with the integrated locks for security.
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for a 2011 GMC Sierra Crew Cab
  First let's start with a roof rack for your 2011 GMC Sierra Crew Cab. For that you will want the Rhino Rack roof rack that consists of part numbers # RRVA137B-2, # RRRLKVA, and # DK227. Then for a J-style kayak carrier the Thule Hull-a-Port part # TH834 would work great. I attached a review video that shows this carrier being used on a 2011 GMC Sierra like yours.
  view full answer...
• Roof Rack Recommendation for a 2007 Chevy Avalanche for Transporting Ladder
  For your 2004 Chevy Avalanche the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 has been confirmed as a fit and would work well. Your sunroof wouldn't be an issue either. I would recommend keeping it closed since it will be very loud transporting a ladder up there from the wind noise. However, I have a better solution for you in terms of a roof rack for securing a ladder. Instead I would recommend the Rhino Rack HD bar roof rack part numbers # RB1375, # RRRLKHD,...
  view full answer...
• Will Inno Roof Deck Hold 23zero Rooftop Tent on 2000 Chevy Silverado
  Adding a roof rack like the Rhino-Rack Vortex ( # RRVA137B-2, # RRRLKVA, and # DK227 ) would allow you to mount the Inno Roof Deck Platform Rack for Crossbars # INA520. The platform rack can hold the tent but at 125 lbs that would only leave 40 lbs for a person which isn't realistic. Even at a higher capacity you would need to make sure your roof could handle the weight. I'm not sure which 23zero tent you have exactly or how it mounts but most people choose to put their tent on a ladder...
  view full answer...
• Recommended Roof Rack For A 2013 Chevrolet Silverado With Sun Roof
  Though we do have options available for your 2013 Chevrolet Silverado, I would not recommend the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B due to it being meant for camper shells. If you tried to install it onto your truck cab you would have to drill into the roof and that could mess with the integrity of the cab since you already have the sunroof up there. I recommend the Rhino-Rack Vortex Aero Crossbars Roof Rack System. You will need the following parts: Rhino-Rack...
  view full answer...
• Aftermarket Roof Rack Options For 2011 Chevy Avalanche
  There are roof racks that can be installed onto your naked roof via door jams / gutters, however, if you wanted a system to bolt into the roof you would need to go with a system like Yakima # Y57CV. This includes 54" tracks that need to be drilled into your roof and then attach the legs and 60" aero crossbars. This would work but I don't recommend it as it requires drilling new holes into the roof and is much more involving than other roof racks for your vehicle. If you removed the factory...
  view full answer...
• Weight Capacity of Rhino Rack Aero Roof Rack for 2013 Chevy Silverado
  The Rhino-Rack Vortex Aero Crossbars - 54" Long - Qty 2 # RRVA137B-2 are rated for 165 lbs. The 2500 Series Legs # RRRLKVA and the DK Fit Kit # DK227 are not rated for a weight capacity. When installed together on your 2013 Chevy Silverado, the weight capacity is rated for 130 lbs. This is not due to the individual components so it must be because of a weight restriction on your roof from the Chevy. With this rack, I also recommend the metal lock cores # RRVA-LEC4
  view full answer...
• Roof Rack and Kayak Carrier Recommendations for 2011 GMC Sierra Crew Cab Towing a 5th Wheel Trailer
  I can certainly help you out with some kayak carriers for your 2011 GMC Sierra. Since you have a crew cab model that means there is a decent amount of space available so you can position the kayaks so that they will not interfere with the 5th wheel trailer. To start you will need a roof rack. I recommend the Rhino-Rack system # RR66SR which comes with everything you will need to add the roof rack to your truck. Plus the bars are aerodynamic and made of aluminum for corrosion resistance....
  view full answer...
• Recommended Heavy Duty Roof Rack for 2011 GMC Sierra 3500 Crew Cab with Naked Roof
  For your 2011 GMC Sierra 3500 Crew Cab with a naked roof, the Rhino-Rack Heavy-Duty Roof Rack referenced in your question is indeed confirmed to fit the roof of your truck. This system consists of # RB1375 for the two 54 inch Heavy-Duty Crossbars, # RRRLKHD for the 2500 Series Legs, and # DK227 for the Custom DK Fit Kit. This system will provide you with extremely durable aluminum crossbars with built-in C-channels for mounting Rhino-Rack, contractor-grade accessories. The bars themselves...
  view full answer...
• Measurements For Installing Rhino Rack Roof Rack on 2002 Chevy Avalanche
  When you install the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 on your 2002 Chevy Avalance the front bar will get placed 250 mm (9-27/32 inch) in front of the seam between the front and rear doors, and then the rear bar will install 80 mm (31-1/2 inches) behind the front one measured on center.
  view full answer...
• Rhino-Rack Roof Rack For 2008 Chevrolet Silverado
  Yes the confirmed kit that fits your 2008 Chevrolet Silverado from Rhino-Rack is listed below. Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Part # RRVA137B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Part # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof - Part # DK227 Below I have added a review and installation video of this rack on a Chevy Silverado.
  view full answer...

Do you have a question about this Roof Rack?