Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces a damaged fat tire rear wheel holder and wheel strap for your Thule T1 platform bike rack (TH9041) or Thule T2 Classic (TH9044, TH9045, or TH9046) platform bike rack.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there, I'm Michael with etrailer.com. Today we're going to take a quick look at this replacement fat tire rear wheel holder. This is going to replace a damaged fat tire rear wheel holder for your T2 Classic platform bike rack, whether that be for the 2" hitches or 1-1/4" hitches, or for the two bike add-on or the two-bike holder. Just like the original, this is designed to keep that fat rear tire in place as you're going down the road.It's going to include the strap here to make sure that that tire stays in place. And because this is a Thule product, you can trust it's going to work for your platform bike rack. You're not going to have to worry about any compatibility issues or anything like that.
It is a direct replacement for Thule. If you are needing a replacement for your T2 platform bike rack for your fat tire bikes, this is going to be the piece for you. That's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Fit fine works well.
Outstanding quality of product and description to determine accurate compatibility.
Fit perfectly and works great.
Ordered the Thule T2 replacement Fat Tire rear wheel holder and Fat Tire front wheel tray(X2) for my Sport Works bike rack. (Thule bought them out a few years ago). The parts bolted right up and work great. Remember to move the rear wheel strap into the longer reach holder notch so it fits around 4-5 inch fatty wheels.
Appears very well made. There were no instructions, so it took me a little bit to figure out how to increase the length of the strap for bigger tires, but now things look like they'll work great.
Replacement fits perfectly.
I purchased these rear wheel holders to replace my worn original ones as pictured given that Thule does not sell any strap buckles.
After installing these newer versions, as you see, the original stop designed on my bicycle carrier was reversed and has the buckle for the strap to engage facing the rear of the vehicle rather than towards the person installing the bicycle on the rack. That is, the original wheel holders had the insert to stop the wheel holder from sliding off on the opposing side of these newer models.
Not a problem, a new hole was drilled on the opposite side and the rack is was good as new,
A little pricey for an old bicycle carrier but I plan to run this for a long time.
etrailer delivered the goods as expected.
Perfect fit for my T2 classic that had a broken strap. Easy install
etrailer’s service and website are excellent for researching and purchasing Thule parts.
Good product, fits and works perfectly. I would love for e-trailer to ship a little bit faster.
Fit perfect. Fast shipping!
Etrailer is so good to purchase from. Prices are reasonable and their shipping is awesome. I received my items 2 days and it was very well packaged. Good job!
The product itself works great. It is just like the one we had to replace. However, when I went to order the product I could only find a replacement fat tire rear wheel holder & strap. After making a phone call I was told the fat tire rear wheel holder & strap will fit any tire. It would have been helpful if I didn't have to make a phone call to find this out. It would have been nice if the description would have included this information

Barb B.
7/10/2025
It’s working great. It’s better than the original. The latching mechanism is much better. I like the loop and how I can pull down on it to tighten it

Barb
7/26/2025
Great! It is so much better than the original design

Great customer service.
My Thule T2 rack is still kicking. Replaced the old wheel holder with this and its back in action.
Straps are way to small to fit fat tires. Item is not as described.

James D.
6/12/2026
John, Thank you for your review. This replacement wheel holder and strap is designed for the Thule T1 and T2 Classic bike racks and can accommodate fat tires up to 5" wide when the strap is installed. what size are your tires?
Now that I have the correct part for my Classic bike rack, everything works great! Thank you for the exchange!
It fits my Thule rack perfectly. And I received it in just a few days from ordering. I'm very pleased with this transaction, Thank you!
Great part. Fast shipping. Thank you
Fits thule t2 classic rack perfectly and easy to install
I ordered this because my Thule bike rack straps will not fit fat tires. This is the same size as what the rack already has from factory.
The strap was too short and couldn't clip in. I notified etrailer and they are going to address the issue. If you look at the photo you can see how short the strap is. I thought there was an adjustment but there isn't. I can't imagine how Thule would advertise it for a fat tire.
The rear wheel holder listed to fit fat bikes I was sent does not fit. I was sent the standard T2 Classic Rear Wheel Holder with the standard STRAP. Strap is too short for a fat bike tire. The front Wheel Holder did fit however. Had to use a bungee for scheduled travel risking bike security. Not so happy to put a high end fat bike on without the proper strap.

Kate F.
2/2/2026
This should not be the case Roger, let's get to the bottom of this. Can you please respond directly to the email that you receive with pictures of it not working? Please also confirm your bike rack, and the width of your tires. I appreciate your time and look forward to hearing from you.
I received the new Rear Wheel Holder for my Thule T2 bike rack just before leaving for a weekend cycling event. It took less than five minutes to remove the old holder and install the new one.
After driving more than 150 miles on the interstate, the new holder kept my bike secure the entire trip. When I arrived at the event, removing the bike was noticeably easier. My old holder would often stick, and I occasionally pinched my fingers trying to release it. The new design operated smoothly and made unloading the bike quick and effortless.
This is a great improvement over the original design. I'm very pleased with the upgrade.
Even though our Thule rack is an older model, the Fat Tire Rear Wheel Holder and Strap fit perfectly. The over the phone service was great and it was shipped faster than what we expected.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.











Andy
11/1/2025
Still seems to be holding out great: no signs of damage, still holds things tight, no excessiveunnecessary movement.