Product Experts Available Now!
Call 1-800-940-8924
Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers
(1211 reviews)
Price: $15.18
In Stock
Draw-Tite
Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers
Part Number: 63080
In Stock
$15.18
Retail:$29.77
You Save: 49%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1211)
- Q & A (0)
- Photos
- Used (1)
Draw-Tite Hitch Anti-Rattle - 63080
- Fits 2 Inch Hitch
- Accessory Anti-Rattle
- Sleeve Style
- Non-Locking Anti-Rattle
- Draw-Tite
- Manufacturer Specific
This silencer applies tension to your 2" Draw-Tite hitch receiver and ball mount or hitch-mounted accessory to help eliminate rattle and movement in your setup. Hinged door acts as a hitch cover to keep your empty receiver clean.
Features:
- Helps to eliminate rattle and vibrations within your hitch receiver for a quieter towing experience
- Specially designed to fit Draw-Tite 2" x 2" hitch receivers
- Works with ball mounts, tow bars, and hitch-mounted accessories such as bike racks and cargo carriers
- Stiffens and reinforces the connection between your hitch receiver and hitch-mounted accessory
- Reduces the risk of equipment damage caused by a loose connection
- Applies tension with an easy-to-use lever
- Protects your empty receiver from dirt and grime with attached cover
- Hinged door attaches to bracket and stays closed with built-in magnets
- Installs easily - bracket slides over the collar of your hitch receiver
- Stays on your hitch so you can enjoy a quiet, stable connection anytime you tow
- Constructed of durable plastic
- Displays Draw-Tite logo
Specs:
- Application: Draw-Tite 2" x 2" trailer hitch receivers
- Dimensions: 4-1/4" long x 3-5/8" tall x 2-1/2" deep
- 1-Year limited warranty
Notes:
- This hitch silencer and cover is not for use on OEM (factory) hitches or on Draw-Tite Ultra Frame Class 5 hitches.
- This will not work on hitches that install flush with the bumper on your vehicle.
- Some Curt hitches have a collar that is too thick to allow this to work properly.
The QSP trailer hitch silencer is the perfect accessory for your 2" x 2" Draw-Tite hitch. It enhances your towing experience by helping to reduce the free play that exists between your trailer hitch receiver and your ball mount or hitch-mounted accessory. By adding the QSP to your setup, you can stabilize your hitch-mounted accessory as it sits in the receiver to eliminate noisy rattle, jarring, vibrations, and sway that might otherwise cause damage to your hitch or equipment.
Installing the QSP silencer and cover is easy. Slide the QSP bracket over the collar of your hitch receiver. Then attach the cover to the bracket with the included hinge pin.
To use the QSP, open the cover and raise the lever. Then insert your accessory or towing equipment into your hitch receiver and secure it with a pin and clip (sold separately). Finally, lower the lever to tighten the QSP around your receiver and the shank of your accessory or towing equipment.
When you're not using your receiver, the attached cover helps to keep out grime and works to deter rust. This hinged cover proudly displays the well-known Draw-Tite name on the back of your vehicle. Magnets in the cover and on the bracket help to keep the cover closed.
63080 Drawtite QSP Hitch Immobilizer
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Did not arrive in time
Ratings & Reviews
4.2
1211 reviews
by:
Jonathan
12/23/2022
etrailer! Is a life saver! First I looked around to get a a hitch installed on my 2023 Mazda Cx9. To have it done by a local installer the prices were somewhat outrageous. I’ve installed a hitch on a previous vehicle, so once I found etrailer and the prices were very reasonable. I installed it with no problems, just followed their videos which made it easy!
I am just waiting on the back order of the wire harness to come in and shipped to me! One other great thing about the etrailer staff…I also ordered a anti rattle silencer! When the box arrived via UPS both ends of the hitch were sticking out of the box…when I opened the box the anti rattle silencer was not in the bag it was shipped in . Looks like UPS through it back in the torn box but didn’t place the pin needed to use the silencer. I wrote etrailer about the missing piece along with pictures. And they corrected my problem. So I highly recommend etrailer for your trailering needs!
Thanks etrailer
I am just waiting on the back order of the wire harness to come in and shipped to me! One other great thing about the etrailer staff…I also ordered a anti rattle silencer! When the box arrived via UPS both ends of the hitch were sticking out of the box…when I opened the box the anti rattle silencer was not in the bag it was shipped in . Looks like UPS through it back in the torn box but didn’t place the pin needed to use the silencer. I wrote etrailer about the missing piece along with pictures. And they corrected my problem. So I highly recommend etrailer for your trailering needs!
Thanks etrailer
by:
Thomas
05/28/2026
Does not fit on my stock receiver hitch. My fault though, I neglected to read that it was only for Draw-tite hitches.
by:
David W.
07/23/2020
Have used this product with both bike rack and trailers. It helps insure a tight connection. Plus the cover helps keep the inside of the receiver clean.
David W.
7/26/2021
Durable and makes for a clean looking installation when the receiver is not being used.
by:
Steve
07/08/2026
Good quality, good price, fast delivery. Unfortunately, it will work with my factory Ford hitch. The description did say for Draw-Tite only, but I thought I'd try it anyway. Didn't work, my fault, not yours.
by:
Ron
10/31/2022
This hitch Silencer came with the hitch itself,but the pin that holds the door onto the assembly was missing. Contacted customer service and received one ASAP. Great great service!
Ron
11/1/2023
After a year, everything is still working as expected! I would buy again!
by:
Kevin
12/16/2025
This hitch silencer works amazingly well. Such a simple and effective device. One star off for the magnet that holds it close, constantly failing, but easy enough to replace with another one. I would definitely recommend this to anyone who has trailer “rattle“, with the bonus of keeping dirt and garbage out of your trailer hitch when not in. etrailer’s service, communication, and information always get an A+.
by:
Dennis
07/11/2026
Fast shipping, good price, I will be back!
by:
Robert R.
09/01/2019
I purchased Item #76128 Draw-Tite Max-Frame Trailer Hitch Receiver and Draw-Tite QSP Trailer Hitch Silencer and Cover Item #63080 which will be used primarily for a Yakima hitch mount bike rack on our 2017 CRV AWD Touring. The hitch and cover were well packaged and arrived in great shape. Your website, including product descriptions, videos and installation instructions were excellent and gave me the confidence that the installation would go smoothly. I was able to install the hitch receiver by myself. After lowering and securely suspending the CRV exhaust assembly I placed the hitch mounting brackets on top of the mufflers while putting a strap through the back of the hitch receiver and the CRV to hook. I was then able to use a jack to raise the hitch into place and loosely secure the bolts on the passenger side. The opposite side was a breeze. The hardest part was tightening/torqueing the bolts on the passenger side due to the cramped quarters. Your fish wires are genius! The Draw-Tite Hitch cover & silencer was very easy to install and gives the hitch a very clean appearance.
by:
Chris
10/12/2021
What a great addition to the hitch. I was leery about removing the rear bumper and associated sensor and lighting component wiring connectors but your kit for the installation was extremely complete and the videos were spot on. The receiver cover and tightening cam was made from a very sturdy material and after an easy installation, the rack was installed, the cam arm tightened down on it and you could easily forget to install the 5/8” bolt except the videos and installation instructions highlighted that you need to install it. It was so well designed to squeeze the insert to prevent any sense of looseness while driving. See photos
by:
Christopher
12/07/2025
This didn't work for the factory installed hitch on my 2021 Subaru Ascent as the safety chain loops prevent it from sliding on. We can't turn it the other way as the rear bumper of the car prevents that. We did try pushing the plastic underneath out of the way but you still couldn't get it to slide straight up. Tried getting it to slide up with a rubber hammer which almost worked, but just scraped up the device to where we can't return it. Seems like it would work well, it just doesn't work on my vehicle. No fault of etrailer or DrawTite.
by:
Andrew
11/16/2020
I like the way it looks, and it is an extremely noticeable difference in the reduction of rattling and noise. I see what others have said about the magnets being weak, but as I normally have a drawbar or other accessory inserted into the receiver, I doubt it would bother me if that were to fail. It was very easily installed, the hardest part was inserting the plastic hinge pin and getting everything to line up properly without being to see from the top (the receiver end is under the bumper). I would buy this again and/or recommend it to others looking for an inexpensive yet stylish solution.
by:
Ray
01/28/2021
Wow! What a great experience! I purchased a trailer hitch rattler silencer/stabilizer collar from etrailer.. The website was very user friendly, the pricing was very fair and reasonable and the delivery was extremely swift. I’m new to towing but not to online purchasing. etrailer is a great company to conduct business with and I KNOW I’ll be back again. Go! Buy from them now!!!
by:
Peter
03/21/2026
The magnet to keep the cover closed does not remain set in the jamb. The cam lever doesn’t tighten the hitch. The hitch still makes lots of noise.
by:
Ed
09/20/2025
It would be worth the money but it does not fit my car, a 2016 Nissan Pathfinder. The hinge pin hac to be put in upside down because it hits the bumper if attempted to put in right side up. Putting in on from the passenger side was very difficult and had to use a rubber hammer to tap in on because the holes for the safety chain were in the way. I did get it on and the trailer ball adapter still feels loose but I haven’t hooked up the trailer to see yet. I hope the cover stays on and the hinge pin does not fall out because it is on upside down. All in all, I suppose it would be the real deal but don’t think so right now.
by:
Mountainpounder
08/24/2017
Good product, stylin', keeps stuff out of your receiver. Used in conjunction with a front mount receiver hitch from Draw Tite on my 2011 Ram 2500.
by:
Daryl S.
09/08/2017
This is great product and works as advertised. No knocking and clanking noise. Installs quickly and easily. Highly recommend to anyone looking for a smooth and quiet ride when pulling a trailer.
Daryl S.
9/13/2018
Still Great! Recommend Highly
by:
Tsu C
01/16/2021
Great anti vibration and cover for a 2" hitch.
The only downside that it does make alignment harder when inserting the hitch attachments.
The only downside that it does make alignment harder when inserting the hitch attachments.
by:
Brenda
01/19/2024
As usual, great quality and great customer service and great shipping speed! Great product—two 72 year old women installed it on the front of our motorhome before a trip to Alaska. Wish we’d taken spares with us because we could have SOLD THEM all along the way. LOL.
by:
Dan
05/13/2025
The silencer works great, however the magnet that keeps the cover closed became unglued and fell out after about 6 months and so the cover would not stay closed. I thought it maybe just my bad luck and so I ordered another hitch silencer from etrailer, and so far the magnet has stayed glued in on the 2nd hitch silencer. Fingers crossed
Gwendolyn Y.
5/14/2025
That's a bummer to hear about your first cover. I hope that the second one more than outlasts the first one you got, Dan.
by:
Wayne
08/21/2022
I tested it out with a hitch to see how it worked. Although I did not trailer anything the silencer did take the play out of the hitch. Not sure why the cover is needed since the silencer does not tighten when thete is no hitch in the receiver; thus, i removed it when not in use.
by:
Adam
01/23/2026
This product did not fit securely on my 2" hitch and still allowed rattling.
by:
Shaun
10/02/2022
Easy install and video instructions were great. I would recommend these products for anyone wanting to DYI a hitch …save yourself some money and buy these products.
by:
Beau
09/30/2025
It was nearly impossible to install, and the toe hitch receiver didn’t fit into the cover.
by:
Joshua
08/01/2024
Went on tight and secure. Draw Tite hitches are always excellent and etrailer is the only place I will ever purchase hitches.
by:
Kerry
10/09/2025
Doesn't work on my brand new gmc sierra hitch. The end collar of receiver is rounded and won't work with your silencer.
25
1211
true
Show More Reviews
See what our Experts say about this Draw-Tite Hitch Anti-Rattle
- How to Tell if you Have the Factory Towing Package 2018 Chevrolet EquinoxI do have a few items you can look for that will give you an idea as to whether or not your 2018 Chevrolet Equinox came equipped with the factory tow package (K5L) or not but the only sure fire way to tell would be to obtain your VIN and contact the dealer as they would be able to confirm if your vehicle came equipped with the factory tow package. From my research, the factory towing package on your 2018 Chevrolet Equinox came with a transmission and engine oil cooler. Therefore, if you...
view full answer...
- Recommended Front Trailer Hitch Receiver for 1999 GMC Sierra 2500 HD 4 Wheel DriveFor your 1999 GMC 2500 HD with 4WD, I recommend the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65005. This receiver is rated for 9,000 lbs line pull, vertical load of 500 lbs, and gross trailer weight of 5,000 lbs. I also recommend the Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers # 63080 to go with this receiver. I've attached a video of this product to assist. I also recommend the Anti-Rattle Trailer Hitch Receiver Lock for 2" Trailer Hitches...
view full answer... - Anti-Rattle Device that Can Work on Ford F-150 Factory HitchI can save you some measuring to determine if the Draw Tite hitch anti-rattle # 63080 would fit. The only brand hitches we can safely recommend this for are the Draw Tite brand hitches that have 2 inch openings. If that's what you have this will work for you but if you have something different and want to measure to see if it could possibly fit we can't really help with that. If the shank of your carrier is hollow I'd recommend a hitch lock anti-rattle device part # 63232 which doubles...
view full answer... - Compatibility of Draw-Tite Anti-Rattle 63080 with Curt C13204 Class III HitchThe Draw-Tite QSP Trailer Hitch Silencer and Cover # 63080 is made for a 2-inch hitch like the Curt 2-inch Class III # C13204 which fits your 2017 Nissan Rogue. Please refer to the linked review video showing use of this anti-rattle item. Although this will work on a 2-inch Curt hitch there are other anti-rattle devices that will do a better job of holding an accessory item such as a ball mount steady in your hitch receiver. One of the best anti-rattle devices for a 2-inch hitch is the...
view full answer... - Anti-Rattle Hitch Lock Recommendation for 2 inch Hitch with Hollow ShankWhat hitch do you have on your vehicle? The # 63080 can only really be used on Draw Tite hitches and if you have something different that would explain why it doesn't want to fit and work properly.
view full answer... - Troubleshooting Fitment Of A Draw-Tite QSP Trailer Hitch Silencer # 63080Hi Terry, What exactly isn't working for you with the Draw-Tite QSP Trailer Hitch Silencer # 63080? Is the latch not closing on it when you have it on the receiver tube? This just has a channel to slide over the lip of the receiver tube and a latch that presses against the tube to lock it into place. The opening in this for your accessory to slot through is a hair over 2" wide x 2-1/16" tall so your accessory shouldn't be getting stuck.
view full answer... - Recommended Trailer Hitch for a 2016 Subaru Outback Wagon with the Kuat Sherpa 2.0 RackIn order to use the Kuat Sherpa 2.0 2-Bike Platform Rack part # SH22G for gray, part # SH22B for black, or part # SH22P for pearl on the back of your 2016 Subaru Outback Wagon, I recommend install the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75673 which is a Class III hitch with a 2" receiver tube opening. This hitch installs perfectly on your Outback Wagon and will allow you to use the Kuat Sherpa 2.0 2-Bike Platform Rack. The only other item I recommend is a hitch cover like...
view full answer... - Availability Of Replacement Magnet For Draw-Tite QSP Trailer Hitch Silencer 63080Hey thanks for reaching out, Peter. Sadly, there are no replacement parts available for the Draw-Tite QSP Trailer Hitch Silencer and Cover # 63080. So unless you happened to find a perfectly shaped magnet piece somewhere, the only option is a new silencer. They are fairly inexpensive, so it won't cost you an arm and a leg to replace.
view full answer... - How to Keep Swagman 4 Bike Rack From Wobbling in Receiver HitchMost Swagman bike racks are already equipped with an anti-rattle hitch bolt. There's a threaded insert inside the shank. When the threaded hitch bolt is inserted, as the bolt is tightened it draws the bike rack's shank tightly up against the wall of the receiver tube holding it in place and preventing the rack from moving around. If you have the XTC4 bike rack, part # S64665, you might be missing the threaded insert, part # P333. Take a look in the end of the bike rack's shank to ensure...
view full answer... - Recommended Hitch for a Bike Rack on a 2013 Acura RDX To install a hitch, for a bike rack, on your 2013 Acura RDX, I recommend the etrailer Hitch item # e24AR. This hitch is custom fit and bolts to your Acura with included hardware. This is a class III hitch with a 2" receiver. You'll want the 2" receiver because it will give you the most options for a bike rack and a higher capacity incase you are transporting heavier e-bikes. I really like the etrailer Hitch item # e24AR because the main crosstube mounts behind your rear bumper. This leaves...
view full answer... - Will DrawTite Anti-rattle Device 63080 Work with an 1-1/4 to 2 Inch Adapter?I do have a solution for you, however the Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers # 63080 is specifically designed to work with Draw-Tite 2" x 2" trailer hitch receivers. Because the collars on the hitch receivers can vary in thickness from manufacturer to manufacturer, chances are the 63080 will not work with your Haul Master adapter. If you're looking to reduce the rattling between the 2" receiver portion of your adapter and an accessory, I recommend the...
view full answer...
- Recommendation to Reduce Aluminum Ball Mount Wear Due to Steel Hitch ReceiverThe Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers # 63080 is the closest thing we have found to what you are seeking. This plastic part does serve as an anti-rattle and will reduce that wear from the softer metal. There isn't a plastic sleeve reducer for the inside of the receiver as that would break down and eventually either change towing capacity or create rattle.
view full answer...
- Will the Draw-Tite Trailer Hitch Receiver Part # 75105 Fit a 2006 Toyota TundraThe Draw-Tite Max-Frame Trailer Hitch Receiver part # 75105 is a confirmed fit for your 2006 Toyota Tundra as long as you are willing to remove the factory hitch if equipped. I went out to our warehouse and measured the overall dimensions for you which I have attached a photo of. If you can tell me what you will be using the hitch for I would be glad to offer some additional recommendations for you but regardless, I recommend using the hitch cover part # 63080 to keep the inside of the...
view full answer...
- Recommended Anti-Rattle Device Compatible With Toyota OEM HitchToyota uses thicker steel in their OEM 2 inch receivers, so many hitch accessories that are meant to fit around or through the receiver wont work with Toyota's OEM hitch. This is why the # 63080 will not work for you. We do however offer an anti-rattle device/locking hitch pin that works great with the Toyota factory hitch. I'd recommend the # SHP2040-XL Let's Go Aero silent hitch pin. The anti-rattle/locking hitch pin works with hitch accessories that have hollow shanks (most 2 inch hitch...
view full answer... - Will the Draw-Tite QSP Trailer Hitch Silencer Work On a Factory Trailer HitchI do have an option for you but there would be no way for me to confirm the Draw-Tite QSP Trailer Hitch Silencer part # 63080 will work with a factory trailer hitch as it is designed especially for the Draw-Tite Trailer Hitch Receivers. That said, if I had to guess I would say no as the collar must be an exact match. However, I do have a similar option in the Gen-Y Anti-Rattle Clamp part # GY88XR. The Gen-Y Anti-Rattle Clamp like the Draw-Tite QSP Trailer Hitch Silencer works to reduce...
view full answer... - Front Trailer Hitch Receiver That Will Allow For the Skid Plate To Mount On a 2008 Toyota TacomaI do have an option that will allow for you to still have your skid plate on your 2008 Toyota Tacoma as with the Curt Front Mount Trailer Hitch Receiver # 31313 mounted to the front of your Tacoma the skid plate must be permanently removed and not reinstalled afterwards. The Draw-Tite Front Mount Trailer Hitch Receiver # 65070 will allow for you to reinstall the front skid plate after the receiver has been installed. I do recommend using a Draw-Tite QSP Trailer Hitch Silencer and Cover...
view full answer... - Anti-Rattle Device Recommendation for Honda Ridgeline OEM Trailer HitchI have a solution for you, but the Draw-Tite QSP Trailer Hitch Silencer and Cover # 63080 that you referenced will not work for your OEM trailer hitch. The # 63080 is specially designed to fit Draw-Tite 2 inch trailer hitch receivers. We do not have any similar products designed to fit factory OEM trailer hitches. As long as the ball mount that you use to tow your trailer is hollow, I recommend the Anti-Rattle Trailer Hitch Receiver Lock # 63232 for you. This threaded hitch pin works...
view full answer... - Recommended Anti-Rattle Device Compatible w/ etrailer HitchesI have a solution for you but the Draw Tite QSP anti rattle item # 63080 you referenced can only be used on Draw Tite hitches. For a similar option you will want to use the Hitch Receiver Immobilizer II item # BX88224 which can be used on etrailer hitches like the item # e87AR.
view full answer... - Front Mount Trailer Hitch Receiver Compatible 2019 Chevrolet Silverado 1500 2.7L Turbo 4 CylinderThe Draw-Tite Front Mount Trailer Hitch Receiver # DT44HR will fit your 2019 Chevrolet Silverado 1500 with the 2.7L turbo. It has the taller brackets to clear the intercooler for your turbo engine. Be sure to get a Draw-Tite QSP Trailer Hitch Silencer and Cover # 63080. This will cover the hole to reduce any whistle that you normally get with the open receiver and it will allow you to remove the rattle from hitch mounted accessories so you do not see that distraction while you are driving.
view full answer... - Recommended Anti-Rattle Hitch Immobilizer for Motorcycle haulerThe Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers # 63080 is not the heavy-duty anti-rattle stability holder for the weight of a motorcycle carrier. For that kind of stabilization, you are seeking, I recommend the Blue Ox Hitch Receiver Immobilizer II - 2" Hitches # BX88224 which will give you stability and support both vertically and horizontally. This is what I'd want to use for my motorcycle. If you want something a little more subtle that will also help stabilize...
view full answer...
- Front Mount Trailer Hitch Receiver For a 2016 Ford F-150 For your 2016 Ford F-150 with the 5.0 V8 you will need either the Curt Front Mount Receiver # C31083 or Draw-Tite Front Mount Receiver # 65067. The EcoHitch # 306-X7904 that you found only fits the 2017-2022 Ford F-250/F-350. I recommend the Curt Front Mount Receiver # C31083 as it is rated for up to 500lbs of vertical weight, 9,000lbs of line pull capacity and will allow you to move a trailer up to 5,000lbs. The Draw-Tite is not rated for moving trailers with the receiver. The Draw-Tite...
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 1997 Dodge DakotaFor your 1997 Dodge Dakota, I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Class 3 - 2" # e53AR which is a confirmed fit and an easy installation on your vehicle. I've attached a video of this installation on a similar truck for you to see the installation. For a silencer, I recommend the Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers # 63080. For a wiring harness, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...
view full answer... - Recommended Cover for Draw-Tite Max-Frame Trailer Hitch ReceiverI don't have a list of every hitch the Rubber Tube Cover for 2" Trailer Hitch Receivers part # I-728 fits unfortunately but it does look like there is room for the tether on the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT79MR so it should work. That said, there is an even better option for you in the Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers part # 63080 which has a much more secure lockup and severs as an anti-rattle device.
view full answer... - Draw-Tite QSP Anti-Rattle, Trailer Hitch Silencer and Cover Not Fitting Curt Trailer HitchWhat is probably happening is that the collar around the receiver opening on the Curt hitch has a very thick powder coat that is preventing the Draw-Tite QSP # 63080 from fitting properly. If you were to sand away some of the powder coat on the collar it would likely fit. That would be easier than trying to modify the QSP. It goes without saying but make sure that the cam tightening lever on the QSP is open when trying to install it on the hitch.
view full answer...
Do you have a question about this Hitch Anti-Rattle?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Written by:
Chelsea B
Video by:
Jonathan Y
Test Fit:
Robert C
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jonathan
12/24/2023
So far used it once for a trailer haul of 600+ miles! No rattle at all! I had to keep looking in the rear view mirror to make sure trailer was still there.