To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you want to tow a small camper, haul a utility trailer, or mount a bike rack, this Curt Class III hitch gives you serious capability without the bulk. With a 5,000 lbs maximum gross trailer weight and 500 lbs tongue weight rating, it’s built for everyday use—strong enough for towing and stable enough for cargo carriers and racks. The 2" x 2" receiver opening is the standard size most towing and accessory gear is designed around, so your existing equipment will likely fit right in.
You don’t need to weld or drill to get this hitch on your vehicle. The fully welded design bolts straight to the frame using the included hardware kit. The precision robotic welding ensures the hitch lines up perfectly with factory mounting points for an easy install that anyone with basic tools can handle. Once it’s tightened down, you’ve got a solid connection ready for whatever lightweight towing task comes next.
This hitch doesn’t just look tough—it is. The square-tube design is made from durable steel and finished with a gloss black powder coat over a protective base layer. That double coating helps block out rust and corrosion from rain, snow, and salt exposure, keeping it looking good and working strong over time. Whether you’re hauling in bad weather or leaving a bike rack on year-round, the finish resists chips and wear better than plain painted steel.
You get strength without sacrificing style. The concealed cross tube keeps most of the hitch tucked up behind the bumper so only the receiver tube is visible. That clean look pairs well with newer vehicles where you don’t want bulky hardware hanging below the rear fascia. It’s a simple way to add capability while keeping the back end looking factory-fresh.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Great service,excellent product
Installation was straightforward and product arrived sooner than anticipated!
I'm not sure if it's from shipping or manufacturing. The hitch plates are about 1 inch too narrow and wouldn't fit. I had to put one ear under an excavator track and bend it two force it open.
Install was straightforward. It was a little challenging getting the hitch into position to put the mounting bolts, but I was able to use a jack and stand.
Could not ask for a better product and caring staff
Easy install and easy to attach our bike rack. Great price too! Shipping went smoothly and it is packaged well.
I want to return this hitch and have you send me another one. It's really beat up. Please advise.
Package great for shipping and easy to install yourself
Product came in with thick plastic bag wrapped around the tube and hitch receiver. The part that you bolt to your suv/truck had only packing tape. As UPS truck delivery guy took it from the back of truck, I heard it clunking and pray that nothing is bent or damaged.
There are several large scuffs on the hitch. It was also sticking out of the original packed box delivery box.
From the time it was dropped off to being installed and torqued down onto my TX500h was maybe 16 minutes. Very easy and straight forward install.
Brooke M.
4/15/2025
Wow, 16 minutes was all? That's awesome. Love a straightforward installation. :) Thanks, Jonathan
Installed in an hour on a 2025 Lexus tx500h. Instructions were straightforward and customer service from the time I ordered through delivery was second to none.
I was missing one of the washers for install. But the shipping speed and product is very good.
Super easy ordering and installation! I marked it down one star only due to the shipping/packaging. It was mainly plastic wrap and there was some scuffing of the hitch. Not a show stopper but it could have been wrapped better. My kick sensor still works fine
I purchased this hitch specifically for my 2026 Grand Highlander Hybrid Limited because it was advertised to not interfere with the trunk kick gate sensor. The product demo video even showed it not interfering with the sensor, however, after we installed the hitch, our kick sensor no longer works. It now does 1 beep followed by 2 quick beeps but will not open the rear gate. In doing research online, this is because the hitch is interfering with the foot sensor. Again, I wouldn't have purchased if I knew it would stop our kick sensor from working.
the hitch was a perfect fit for my lexus tx350. Installed in less than 30 minutes at a local uhaul location.
Quick delivery, super easy install… packaging definitely leaves something to desire though… thankfully small parts were securely taped to the hitch and the hitch survived UPS lol.
Pro tip. Deep sockets can be a very tight fit on the passenger side bolts (specific to the grand highlander) so recommend having a shallow socket.
It’s a solid and well made item that directly bolster onyo my Grand Highlander without and issues.
Fit perfect. Instructions were clear. Took about 20 minutes to install. Didn’t have to lower exhaust pipes, but maybe would have saved a couple minutes if I had.
The hitch arrived wrapped in plastic and some bubble wrap. Installed by myself on my 2025 Grand Highlander in about 30 minutes (removing packaging, setup, tools, install, cleanup). I highly recommend!
I received the hitch receiver and installed it myself. I would recommend lifting the car and a 2nd set of hands. Receiver is thick gauge and heavy duty. The black looks clean and the bar hides behind the bumper, only showing the actual receiver stem.
It fit perfectly and it installed as easy as everyone said. I think I spent a total of 30 min installing it which includes gathering tools, removing bolt hole plugs, and bolting it up. Definitely recommend this hitch to anyone with a Grand Highlander!
I bought this for our 2025 Grand Highlander. I must say, this was *very easy* to install and even a novice will be able to do it just fine. I used a 3/4" socket wrench and had the hitch installed in 15 minutes by myself by just laying on the ground under the vehicle. The only thing you'll absolutely need is a torque wrench to measure the ft lbs of torque being applied to the screws to ensure a secure attachment. Great value; the hitch is high-quality. The welds are very strong.
Fit perfect. Easy. On my grand highlander hybrid.
Kate F.
6/5/2026
Install looks great John! What do you plan on using the hitch for?
Hitch fit Grand Highlander hybrid. Easy install, just 4 bolts. The threaded holes are already in the frame. Just remove the plastic caps in the holes. I used a jack to help hold it up during install and and extra set of hands. 15 minutes to install. Josh was thorough and followed up on the purchase.
Brooke M.
5/21/2025
Looks like a perfect fit for the 2025 Highlander! Thank you so much for the photos. Are you carrying anything fun with the new hitch? [I'll be sure to let Josh know he got a shout out from you, too :)]
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard
2/23/2026
Great product. Easy to install