Are there Modifications Needed to Install a Hitch on a 2024 Toyota Grand Highlander?

Question

Question:

Any modifications needed to add a hitch 2024 grand highlander hybrid limited Thanks

asked by: David A

0

Expert Reply:

No, none at all. Installing the Curt Hitch item # C26VV, on a 2024 Toyota Grand Highlander, is about an easy of an installation as you can get. You just have to pop out a couple of weld nut plugs on either side and hold the hitch up. It would be easier with someone to help though.

The Curt Hitch item # C26VV has been confirmed to fit the 2024 Toyota Grand Highlander Hybrid Limited. It fits all models of the 2024 except the ones with dual exhaust.

I have linked the installation instructions below so you can check them out.

If you are planning on towing you will also need a wiring harness item # 119250KIT and a ball mount kit item # C45534.

expert reply by: Jerred H

0

David A.

7/10/2024

Thanks for all your help You answered all my concerns

Jerred H.

7/10/2024

@DavidA You're welcome! Happy to help.

Answer 1

Yes, it does. The Curt Trailer Hitch item #C26VV has been confirmed to fit the new 2024 Toyota Grand Highlander. This hitch is custom fit and bolts to the Highlander with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 2

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item…

view full answer...

Answer 3

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, it will! We've sold a few of these and have heard back from some of our customers that have said the Curt Hitch item #C26VV does not affect the functionality of the kick sensor. What typically happens in situations like this is you lose the…

view full answer...

Answer 6

Hello Gregg. Yes, I have a great set up for you. For your 2024 Toyota Grand Highlander the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C26VV. This hitch can handle a tongue weight of 500 pounds, and a towing capacity of 5,000…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Hey Jason! The etrailer #e69ZV and Curt hitch do share the same design. Our hitch has the same restrictions so you do not want to use it for that bike rack. Instead, you can use the TowSmart Trailer Hitch Receiver #TS48QR. This also has a higher…

view full answer...

Are there Modifications Needed to Install a Hitch on a 2024 Toyota Grand Highlander?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching