Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
This item does not fit your vehicle
2016 GMC Acadia
These items fit your vehicle
2016 GMC Acadia
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Curt trailer hitch receiver gives you a solid foundation for light-duty towing and everyday use. With a 2,000-lb maximum gross trailer weight and 200-lb tongue weight rating, it’s built for hauling small trailers, cargo carriers, or bike racks without overdoing it. The 1-1/4" x 1-1/4" receiver opening works with the most common light-duty accessories, so you can easily hook up a ball mount or load your bikes for the weekend.
Installing this hitch is straightforward thanks to its custom-fit, bolt-on design. It lines up with existing mounting points, so there’s no drilling or welding involved. Everything you need for the install—hardware and instructions—is included, making it a practical addition for folks who like doing projects in their own driveway.
The sturdy, square-tube design is precision robotic welded for consistent strength and fit. It’s finished with a gloss black powder coat over a protective base coat that helps resist rust and corrosion from road debris and weather exposure. This means the hitch stays solid and looks good even after years of towing or carrying gear.
Whether you’re pulling a small camper, hauling a utility trailer, or using a bike rack, this hitch handles light towing jobs safely within its 2,000-lb capacity. You can depend on it for weekend trips and everyday setups where stability and fit matter most.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
The hitch is well built and fit the car just fine. The directions could use some work. The placement of the cutout on the car underpanel was off by 2-1/2 inches. This was made more difficult because there was not a good way to make a trial fit. The fish wires worked well to install a bolt but they made it impossible to make a trial fit unless one wants to take the chance of losing a bolt in the frame of the car. A stepped bolt where the nut can be installed before the fish wire is removed would be a great addition to the kit. It took me three hours to install the hitch.
11555+S63360. Honda 2009 CRV + bike rack.
Delive packaging.
Hitch had punched 3 holes in the cardboard box. Thankfully the bolt kit was well secured to the hitch center, else it would have fallen out and got lost. The bike rack packaging was excellent.
Fitting the hitch.
Thanks for providing the fish wire, very easy to use per the instructions. Why are you asking the customer to damage their vehicles by filing? I ground chamfer edges on the 1" bar 'bolt washers' and they fitted thru the vehicle holes snugly.
Fitting the bike rack to the hitch.
Straight forward fitting but note that a 3/4" wrench is required to tighten the retaining bolt and undo it when you want to access to the trunk. My wife keeps a dedicated socket wrench in the car so this aspect of the rack is now a theft deterrent.
Overall, product is as represented. Purchased to mount Thule 4 bike hitch mounted bike rack. Installation was a little more cumbersome than I expected. I needed a helper to hold the hitch in place so that the mounting bolts and rectangular washer were not pushed up into the mounting holes in the frame. The muffler had to be lowered from it's mounting blocks for the installation, and was a little difficult to get back in place because of the one arm of the hitch. Finally, a spacer block for the towing loop was missing, and had to be replaced by a 1/4" pc of aluminum stock that I had. On the plus side, I like the center support afforded by the tow loop bolt, more stability right near the load. The hitch looks great, doesn't protrude a lot from the bumper and has a neat appearance. I would appreciate stainless steel fasteners, using the hitch in the northeast U.S. there's lots of snow and salt in the winter. I would recommend this manufacturer to a friend.
I not only bought the C11555 receiver but also the appropriate wiring harness and 2" ball hitch. I installed everything myself with the help of the excellent videos found with the product specifications on the etrailer web site. Based on my experience with the install and their customer service, who were of great help in picking the right products, I would highly recommend etrailer for you hitch product needs.
Kevin B.
I had absolutely zero knowledge about trailer hitches and what I needed etc. What drew me to etrailer were all the helpful/educational YouTube videos they have produced. I called etrailer as a result, and had the good fortune to speak to Lacey. She was very helpful and knowledgeable. She coached me through everything I needed for my particular make and model of car. Most importantly, in my case, she asked (without pushing) if I wanted a hitch that required my frame to be drilled - or get a model that did not require me drilling the frame of my car. I definitely chose the latter and it was worth it to me. The product was shipped promptly and was very complete and very well made. The documentation was excellent including the exact measurements I needed to cut an access point in the panel underneath my car. The installation is very doable but you will need better than beginner skills I feel. But again, any video you might see of an installation, plus the instructions makes this worthwhile attempting. My only issue was I feel that the anchor bolts that went into the frame should have been engineered to slip right into place without requiring me to widen the holes. True, I did not have to drill into my frame, but the holes to receive the anchor bolts had to be bent wider or ground out larger to accommodate those bolts. The fit and finish of the hitch makes it look very professional. Overall a good experience.
Perfect for Thule bike rack. Very handy also for strapping my SUV tailgate down with my kayak sticking out beyond the bumper. This hitch beats all other prices for more expensive ones. I would highly recommend this to everyone who is looking for an aftermarket hitch.
Perfectly fit. Just dealing with the under cover body panel is a bit challenging as it makes putting the nut on to the bolt a lot more difficult. For making the mounting hole bigger, I use a handheld dremel and for making a 3x3 opening on the under body panel, I use the circular drill for the door knob.
Installation would have been better if I had read the instructions and understood them more clearly. Having the right tool to open up the holes in the frame is critical. If you don't have hand tool experience and a really good hole grinding tool this is not for you. If I didn't spend so much time figuring out how to open up the holes I would have been done in a half hour.
Nice product but the instructions and the pictures in my opinion were not very clear. This took longer than it should have because of the lack of clear and precise instructions. Once we got through the installation though the hitch works great.
W. D.
7/19/2017
Hitch working great just hope instructions were made easier to understand.
Rachael H.
7/19/2017
etrailer did a nice job covering the installation if you choose to do it yourself. The hitch, proudly made in the USA, was reasonably priced and arrived in a matter of days. Well done etrailer!
Brian T.
5/19/2018
Great hitch overall for the price.
This is an excellent product. I got it due the cheapest installer wanted $325 plus tax including the light assembly. I never have put one on but got the product in the mail in two days with regular delivery and put it on the same day (with one helper). All you have to know how to do is drop the exhaust pipe (its easy with WD-40 on the rubber hangers). Took about one hour and I ordered the electric assembly (which again I had never done) and it took about 10 minutes. Great Product. Savings about $185 in 1 hour/ 10 minutes. Best of luck!!! 9/20/14
David C.
9/23/2015
year later and product just as satisfied with as when assembled.
Considering this was a first installing of this hitch it went pretty well for a learning curve. Everything lines up nicely. As other reviews have said there is no warning about installing the rubber muffler hanger (next to the hitch bar) BEFORE you install the hitch. Otherwise you'll be pushing, prodding and jamming it on past the hitch frame.
I used Dremel tool with metal cutting burr to cut the frame holes a little larger as per the instructions.
Pedro
10/23/2017
Still good after one year.
Fit like it was made for it. Wait it was! My honda CR V is now a toy hauler, an 18.6 ft Hobie Tandem Island
The hitch was mostly easy to instal on both cars and serves the purpose of carrying my bicycles! Bravo to etrailer!
Seems to work well with our Hitch Bike Rack. This is a light duty Class I hitch; we'll see how this Hitch performs pulling a trailer load of spring mulch.
The hitch fits perfect to our SUV. I've got pretty good deal on the sale price.
Product support team is very knowledgeable and they shipped my order so quickly. etrailer is highly recommended!
I 1st ordered a draw tight hitch for the 2011 CRV and it did not fit.. After trying a second draw tight, which did not fit, I talked to Kaylin and we decided to try a Curt hitch. The Curt hitch fit perfectly. It is a 30 minute job to put this hitch in and it looks great! Great customer service!!!!!
Great easy install! But there's a lot of clearance (slop) in the receiver when my adapter is inserted. I need to come up with a shim or something to get rid of the rattling noise.
This is the second Curt trailer hitch I have purchased and installed, earlier on my Mazda MX5 and now on my 2007 Honda CRV. Excellent products, perfect fit and very easy to install. I also purchased the Curt wire harness for both and they too were very easy to install.
E trailer has very good prices on their products and delivery was very fast.
I've also purchased in the past, wheels, tires and latches for my home built luggage trailer. E trailer is the best company, hands down, to do business with.
Thank you E trailer.
The hitch arrived in one day! It was so easy to put on and is sturdy and high quality for such a great price!
I purchased 2012 Honda CR-V in December 2011. O.E. trailer hitch is $363 + $200 installation. At this time Curt trailer hitch #11555 is the only afetrmarket one to fit my car.
Instructions & installation:
Instead of enlarging the frame holes I filed down the 1x3 blocks to fit the holes.
Under body panel trim diagram is not for a redesigned 2012 CR-V.
It took moor then two hours of tinkering lying on my back, but the result is very satisfactory.
Sales people at "etrailer" have been very helpful in finding out which hitch fits my CR-V
Thanks
Nicely made product, install went fairly smooth, I needed to file one of the spacer washers to fit into place. I have a 2009 Honda CRV and I didn't need to trim or remove body panel as was suggested in install instructions. Washer for tow loop ( muffler side ) could have been wider.
Tom K.
2/21/2016
Working out just fine, no issues. Good solid hitch.
I had cancelled this order, but etrailer has apparently added a "verification" step requiring a response to a follow up email. This is obviously an attempt to add friction, and force customers to complete a purchase that they don't want. I have been very pleased with many purchases from etrailer in the past, however this will be my last. I do not appreciate being manipulated like this
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott R.
1/28/2015
All is good. We use it frequently with no issues. Thank you.