Trailer Hitch with Trailer Wiring Mounting Tab Recommendation for a 2012 Honda CR-V
Updated 05/23/2012 | Published 05/21/2012 >
Products Featured in This Question
Question:
The trailer hitches that you have available for the 2012 Honda CR-V do not show a small bracket to hold the wire plug adaptor for the lights. I am interested in the #75547 but cannot see it in the photo. Does this hitch have one and if so could you provide a photo of it? If not on this hitch is there another that does? Please respond a.s.a.p. as I would like to place an order. Thanks !
asked by: Neil
Expert Reply:
The Curt Mfg. Class I trailer hitch, # C11555, does not have a bracket welded to the cross tube for installation of a trailer wiring holder bracket, like part # 18144.
You could install the # 18144 bracket on the hitch easily with the No Drill Mount Bracket, # 18140, see the video installation that I attached for you.
If you are interested in a Class III trailer hitch like the Draw-Tite # 75547, that you mentioned, you could use the Draw-Tite Class III hitch, # 75742, which is the correct application for the 2012 CR-V and has a tab welded to the cross tube for installation of the # 18144 bracket. I attached a photo showing the tab on the # 75742 hitch for you to see.
The # 75547 hitch will not fit on the 2012 CR-V.
To complete your towing setup you may need the following items:
etrailer.com Drop Ball Mount Kit, # EBMK4
Tow Ready Wiring kit, # 118561
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Install Instructions for Curt Trailer Hitch # C11555
- Q&A: What Size Wheels Can the Kuat Transfer V2 Handle?
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Trailer Hitch Weight for a 2011 Honda CR-V
- Q&A: Most Concealed Trailer Hitch Receiver For a 2023 Chrysler Pacifica
- Q&A: Replacement Lower Assembly and 2" Stinger for Thule T2 Pro XTR 2-Bike Rack
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Recommended The Draw-Tite Trailer Hitch For My 2008 Honda CR-V
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How Much Weight Can I Put on My Trailer Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Article: Flat Towing Package for 2007 Honda CR-V



