bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2002 Chevrolet Suburban
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Part Number: C11132
In Stock
$224.93
Retail:$355.95
You Save: $131.02
Trailer Hitch
Not Confirmed to Fit

2002 Chevrolet Suburban

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11132 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (99)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C11132

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • 200 lbs TW
  • CURT
  • For Towing

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11132 Curt Class 1 Trailer Hitch Receiver

Installation Details C11132 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.9

99 reviews
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:

This was very easy to install. Looks great!



by:

Even with my limited tools, took less than an hour, Looks great too.



by:

Fast Delivery. Great Fit Easy Installation . LOOK GOOD ON MY CAR.



by:
2007 Chrysler PT Cruiser

Would highly recommend this product. Price was right, fast delivery, and was easy to install. Took one hour to install including setup and cleanup.



by:
2003 Chrysler PT Cruiser

Fit's great and was an easy install. And didn't have to drill holes as you do if you purchase the other hitch for the PT Cruiser.



by:
2005 Chrysler PT Cruiser

Fast delivery and good product. Should have told you to remove spare tire first. Said 1 hour for novice, but took closer to 2.



by:

Wasn't to hard to install my self, plan on it taking a little longer than about 40 minutes if you do this with out a floor lift other wise its super easy took me a whole 15 minutes once i finally got it in the air



by:
2005 Chrysler PT Cruiser

Hitch came in great shape and very fast. Installed within 30 min.
Looks great and work great.

I will be a repeat customer for anything I need in trailer items.



by:

ordered on friday... arrived wednesday! in fact, they were able to upgrade to express shipping at no charge! i'm extremely happy with my experience. great products, great prices, incredible customer service.



by:
2003 Chrysler PT Cruiser

Trailer hitch and wiring harness arrived in one day. Product instructions were excellent and installed both in less than one hour. The fit of the hitch was excellent and all parts were included. Could not have happier with the products and delivery time.



by:
2002 Chrysler PT Cruiser

excellent product. easy install . great company fast shipping. highly recommend buying from etrailer.com



by:

Arrived sooner then I expected. It was easy to install, but I would have liked a better description in how to install the wire harness. the wire to the left turn signal was either a little short or I may have routed it the wrong way. but everything work fine.


thank you



by:

Great fit and easy installation with only basic hand tools. No need to drill any holes! Looks like a factory installation on the vehicle with only a small part of the receiver showing.



by:

The product was great.the install was interesting. muffler sspare tire.inner fender wells.everything fit perfect and all went back in factory place.great product.thanks etrailer.



by:

I ordered from the correct internet salessite (etrailer.com) for my trailer hitch. The ease of ordering, quick service and on time delivery meant additional savings for me. They had a super service of eMailing me the status of my order each day it was enroute until it arrived. Thanks for a great shopping experience.



by:

Price was great. Ordered on tuesday received on friday.
Installation took about 45 minutes for the Hitch. Wiring took about an hour. Running wire from battery to rear was hardest part .
Instructions were great. One of the easiest projects I've ever done.
Would definetly recommend to anyone.

Good Service, Reasonable Price, Fast Delivery, Easy Install, what
more could You ask for.

Thanks Russ



by:

Great product, installation was easy and instructions very good.
I didn't use any power tools and had to jack up the car put it on safety stands and use a creeper and it only took me one hr.
I removed the spare tire and removed both brackets from the frame for the muffler. The T-one wiring harness yellow wire could have been about two or three inchs longer but I made it work.



by:

Fantastic communication and follow up. Many thanks a million times over!



by:

Great hitch. I installed this on a 2003 PT Cruiser. It took two of us senior citizens an hour and 20 minutes to install. Lowering the muffler involved removing two 10mm bolts that held the front strap and two that held the back plus one more that connected a braided ground to the frame. After that, it was easy for two of us to slip the hitch over the muffler and position it. Note: Do yourself a favor and snug the four vertical bolts that hold the hitch to the vehicle frame first. That will make inserting the four horizontal bolts much easier (the holes will line up).

I am using this with an aluminum Hitch Haul style cargo carrier to carry gasoline and propane outside of the vehicle, so I have a 1 1/4" - 2" converter with a 4.5" rise to get the carrier off of the ground. Item MT70355.



by:

Fits better than I thought it would.



by:
2007 Chrysler PT Cruiser

Fit perfectly! I have always been happy with the quality of the products that you sell. Shipping was fast and arrived on time.



by:
Chrysler PT Cruiser

It's a perfect addition to my son's PT cruiser. Now with the retro look of the PT cruiser he can tow his 1980 smoker craft boat with the antique outboard motor. Thanks again E trailer for great products and my fifth hitch I purchased from you.

Stephen profile picture

Stephen

5/29/2024

awesome just as good as the day it was installed.



by:

I had the hitch installed by a professional. They reviewed my order and confirmed the hitch I ordered was perfect. When I took to them for installation, they said it took less than an hour. Was easy to install. No problems. Worked perfect.
THANKS etrailer! for working with me and helping me choose the hitch that will work for my needs.
I'm using it with a bicycle rack for my 4 wheel walker so I don't have to put in the back seat or trunk anymore.
The rack you said will work - is AWESOME too! Very well made and looks like won't even have to modify it!
THANKS again!
Sorry - no photos right now.

Antoinette profile picture

Antoinette

7/27/2016

still working great! thanks!



by:

First, the hitch was shipped out on a Sunday, and arrived by Friday eve to Oregon.
I've installed a few trailer hitches over the years requiring some "fiddling" to get holes lined up. This Curt hitch fit like a glove. I was able to hand-start all the supplied bolts without filing or fairing holes. Once installed, which took me about an hour up on my hoist, the fitment to the body was perfect....couldn't be better. Very pleased.

David  profile picture

David

6/7/2021

Exçellent



by:
Chrysler PT Cruiser

I tried etrailer because they had the best price. Thats all. My order showed up way ahead of schedule, like 3 days earlier which was a huge help to me. They also had a video of the installation. I borrowed a torque wrench from a friend and did it myself right in the driveway. Fit perfect. I sold that pt cruiser that I installed this hitch on last month and I plan to order a new fifth wheel hitch through etrailer for the f350 I have just bought. This was my honest experience and I am happy to be placing another order soon.


25
99
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Towing Capacity of 2005 Chrysler PT Cruiser
    You are correct that passenger and cargo weight inside a vehicle does reduce the trailer weight it can tow. A vehicle like your PT that is intended primarily to transport people may not have much trailer towing capacity if you have a full load of passengers and cargo. I checked the online owner's manual for the 2005 PT Cruiser and the manual states (on page 242) the maximum trailer weight is 1000-lbs when the total weight of passengers, luggage and cargo is no more than 865-lbs. This is...
    view full answer...
  • Doe The Curt Hitch C11132 For A 2002 Chrysler PT Cruiser Include The Wiring?
    Hi George! The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11132 does not include the wiring. It is just the hitch and hardware needed to install it. For the wiring, you will want the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55532. This is a plug and play harness, so the install will be nice and easy. What are you going to be towing with your PT Cruiser?
    view full answer...
  • Does Curt Hitch # C11132 Require Use of Stabilizer Strap When Carrying Non-Supported Load
    Actually the Curt hitches no longer require the use of stabilizer straps when carrying a non-supported load like a bike rack. So you would not need to use a strap with the # C11132. This was a requirement for several years but recently Curt changed this rating.
    view full answer...
  • Trailer Hitch Receiver and Towing Capacity for 2007 PT Cruiser
    According to the owner's manual I looked up online, your 2007 Chrysler PT Cruiser has a maximum towing capacity of 1,000 lbs and tongue weight capacity of 110 lbs. You'l want to verify that in your copy of the manual, but so long as you meet those capacities you are able to tow. There are two options for a trailer hitch receiver for your vehicle, the Draw-Tite # 24759 and Curt # C11132, and I highly recommend the Curt because it does not require drilling to install while the Draw-Tite...
    view full answer...
  • Correct Ball Mount Recommendation to Tow Malone EcoLight Trailer with PT Cruiser and Curt Hitch
    You asked a great question about picking out the correct rise/drop ball mount for towing the Malone EcoLight Trailer part # MAL53FR. Basically you want to go with the ball mount that has the correct rise/drop to allow the trailer to sit as level as possible. So when the Curt hitch part # C11132 is installed on your 2010 Chrysler PT Cruiser it's going to have a distance of 11-1/4 inches from the top of the hitch opening down to the ground and the Malone trailer has a distance of 15 inches...
    view full answer...
  • What Class Of Trailer Hitch Is Available For A 2004 Chrysler PT Cruiser
    The only hitches made for the 2004 Chrysler PT Cruiser are Class I hitches like the Curt Class I 1-1/4 Inch Hitch # C11132. Class I hitches are rated at 2,000 lbs. gross towing weight capacity and 200 lbs. tongue weight. The weight capacity you will be able to tow is determined by the towing weight capacity of your vehicle. The Chrysler PT Cruiser has a low towing weight capacity and that is why there are no Class II or Class III hitches available for your vehicle.
    view full answer...
  • Why Do I need a Stabilizer Strap to Use a 2 Bike Hitch Rack on a Curt # C11132 Hitch
    The purpose of the stabilizer straps is to prevent the bouncing and jarring that bike racks usually experience when hitting bumps from damaging the hitch. The strap you would want is the Curt Bike Rack Strap, part # 18050. The reason you want to use a stabilizer strap is that you might twist your the hitch up or damage the frame of your 2001 Chrysler PT Cruiser. If you use the stabilizer strap you would have no problem carrying two bikes on a hitch mounted bike carrier. For a bike rack...
    view full answer...
  • What Is The Difference Between Curt And Draw-Tite Trailer Hitches For 2009 Chrysler PT Cruiser
    You are correct that the instructions for the Curt hitch do require 4 bolts on each side, making that a total of 8 bolts for installation. Both of the hitches have been designed and tested for the weight capacities listed. Curt warranty does require the use of a stabilizing strap like part # 18050. The # C11132 and # 24759 are both Class l hitches with 2,000 lb towing capacity and 200 lb tongue weight capacity. I spoke with my contact at Draw-Tite and they told me the reason for using...
    view full answer...
  • Recommended Trailer Hitch Receiver, Ball Mount, Bike Rack & Trailer Wiring for 2005 PT Cruiser Turbo
    For your 2005 Chrysler PT Cruiser, I recommend starting with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11132 for your custom fit. Then I recommend the Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K # 3593 along with the 2 inch hitch ball # 19258. For your wiring, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55532. With your towing capacity it is rare that you'd need to have a...
    view full answer...
  • What is Involved with Installing Curt Hitch C11132 On a 2006 Chrysler PT Cruiser
    The tow hooks are bolted to the frame using the locations that the hitch will use. We have an installation video of a similar hitch, from Hidden Hitch, being installed on a 2006 PT Cruiser. It is a similar installation, there is a portion about drilling that would not apply to the Curt model. The installer points out the tow hooks and shows how to remove them. He also shows how to lower the exhaust. Make sure to follow the Curt instructions for the C11132 hitch, but you can watch the video...
    view full answer...
  • Can a 2005 Chrysler PT Cruiser Tow a Wave Runner
    Depending on the size of the engine on the wave runner, a single wave runner and trailer can weigh between 700 and 1000 lbs. Although the Curt Class I receiver you mentioned has a 2000 lb towing/ 200 lb tongue weight capacity, you still must abide by the towing capacity of the vehicle. From what I have been able to determine, your PT Cruiser has a towing capacity of 1000 lbs. You will want to consult the owners manual to confirm this. If the weight of your wave runner plus the weight of...
    view full answer...
  • Which Vehicles with Curt Hitch C11132 Fit
    The Curt Class I hitch, part # C11132 will fit 2001-2010 Chrysler PT Cruisers.
    view full answer...
  • Does Curt Hitch # C11132 Require Use of Stabilizer Strap when Carrying Bike Rack
    I have great news, you actually don't have to use the stabilizer straps with the Curt hitches like part # C11132 with bike racks like the Thule Helium part # TH9043PRO. They actually changed that requirement a while back so it would not be needed.
    view full answer...
  • Difference in Curt Hitch # C11132 and Draw-Tite # 24759 for a 2005 Chrysler PT Cruiser
    Both the Curt 1-1/4 Inch Hitch, part # C11132 and the Draw-Tite 1-1/4 Inch Hitch, part # 24759 for your 2005 Chrysler PT Cruiser are very similar hitches. They both have a 200-lb tongue weight capacity. The difference in the two hitches is the Curt hitch does not require any drilling to install and the Draw-Tite requires two 1/2 inch holes to be drilled in the frame. The Draw-Tite might take a little longer to install due to the drilling of the frame. The Curt hitch uses 4 bolts on each...
    view full answer...
  • Parts Needed To Haul A Vespa With A 2003 Chrysler PT Cruiser
    With the vehicle only having a 1000lb towing capacity for the vehicle you would only have a 100lb tongue weight capacity so hauling a cargo carrier with 225lbs on it would exceed the capacity of the vehicle and the hitches that are available for this vehicle. There are adapters that can give you a 2" receiver but the downside is that adapters reduce the overall capacity of the hitch by 50% so you'd end up with too little capacity to haul your Vespa. The only way you'll be able to safely...
    view full answer...
  • How to Measure the Rise of a Ball Mount for a Chrysler PT Cruiser
    The rise is the distance from the top of the shank to the top of the ball platform, with the ball mount in the position (rise) it will be used in. I am including a link to a FAQ page that will describe how to measure and choose the correct ball mount. The 2004 Chrysler PT Cruiser uses a Class I 1-1/4 inch hitch. All Class I hitches have to use the ball mount that is recommended from the manufacturer. The Draw-Tite Ball Mount, part # 3593, is the ball mount that is recommended for the...
    view full answer...
  • Will CURT Trailer Hitch # C11132 Fit a 2008 Chrysler PT Cruiser Convertible
    The CURT Trailer Hitch, # C11132, will fit all models of the 2005 Chrysler PT Cruiser which would include the convertible. If you plan on doing some towing, the hitch comes with a ball mount, pin and clip. For a ball you can use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use # C55532. I have included links to the installation instructions for the hitch and wiring for you.
    view full answer...
  • Recommended Trailer Hitch And Wiring For 2004 Chrysler PT Cruiser
    The trailer wiring is not included with a trailer hitch for your 2004 PT Cruiser. We do offer them separately. There is no drilling required for the installation of the Curt Trailer Hitch, part # C11132. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I have attached a link to an installation video for this hitch on a PT Cruiser you can check out. As the video shows, the trailer hitch uses the tow hook mounting locations on the vehicle frame after they have been removed. The...
    view full answer...
  • Will Trailer Hitches for a 1998 Dodge Neon Fit a 2003 Chrysler PT Cruiser
    We do have several trailer hitches designed to fit the 2003 Chrysler PT Cruiser, including the Curt Trailer Hitch, # C11132, that you have referenced. I have included a link to the available option below as well as a link to the installation instructions for the Curt hitch. The available trailer hitches for the 1998 Dodge/Plymouth Neon will not fit the 2003 Chrysler PT Cruiser. The trailer hitches for the Neon were designed to fit its unique frame which differs from the PT Cruiser. The...
    view full answer...
  • Will Curt Trailer Hitch # 11132 Fit a 2006 Chrysler PT Cruiser Convertible
    The Curt Trailer Hitch, # C11132, will fit all models of the 2006 Chrysler PT Cruiser which would include your convertible. I have included a link to the instructions for you. If you plan on doing some towing, the correct ball mount is # C45520 and you can use pin and clip # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # C55532. I have linked the instructions and a video showing a typical installation of the wiring.
    view full answer...
  • Can a 2 Trailer Hitch Be Installed on a 2009 Chrysler PT Cruiser
    The only trailer hitch options that were massed produced for your 2009 Chrysler PT Cruiser are 1-1/4" hitch receivers: - Curt # C11132 - Draw-Tite # 24759 Aside from that if you're wanting something larger you'll need to have it fabricated by a shop. If you'd rather stick with one of these options then I recommend going with the Curt because it has more points to install the hardware so it's a bit more stable, and the receiver has a reinforced collar which not only looks nicer but...
    view full answer...
  • Hitch Receiver For 2009 Chrysler PT Cruiser
    Get the Curt Trailer Hitch Receiver # C11132 for your 2009 Chrysler PT Cruiser as it comes with all the hardware you need to install with no welding needed. You'll need a ball mount # C45520 and a hitch ball. Either 1-7/8 inch # C40001 or a 2 inch # C40018. If you do have a trailer you plan on using, you will need some wiring # C55532. Depending on what you plan on hauling. I've included a video for you to see how it installs!
    view full answer...
  • Recommended Trailer Hitch Receiver To Tow Small Trailer W/ 2005 Chrysler PT Cruiser
    Based on the information I could find on your 2005 Chrysler PT Cruiser it has a towing capacity of 1000lbs as long as the weight of your passengers and luggage in the vehicle does not exceed 865lbs, though you will want to verify this by checking the owner's manual of your vehicle. For a trailer hitch receiver I recommend the Curt Trailer Hitch Receiver # C11132. To complete your towing setup you will need a vehicle wiring harness # HM11142435, drawbar # C45520, 1-7/8" hitch ball # C40001,...
    view full answer...
  • What is the Capacity of Curt Trailer Hitch 11132 for a 2007 Chrysler PT Cruiser
    I am not sure what you mean by system rating but the Curt trailer hitch # C11132 is rated for 200 pounds tongue weight and 2,000 pounds gross trailer weight. I have included a link to the installation instructions for you to view. Be sure to consult the vehicle owners manual for its towing capacities. Always go by the lower rating. The hitch meets Regulation V-5 and SAE J684 regulations. If you plan on towing with this hitch the correct ball mount to use is # C45520 with pin and clip #...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Dan D
Edited by:
Dan D
Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<