On bitter mornings you don't want to deal with your equipment fighting you. This lower hose heater warms fluid before it reaches the engine so starts come easier, parts stay protected, and you keep working without the cold-weather struggle.
Farm mornings and job sites don't stop for freezing weather. This hose heater warms coolant before it reaches the block so engines on tractors, skid steers, and generators turn over easier and run smoother all winter.
You don't have to worry about overheating or wasted energy. A built-in thermostat automatically regulates the heat, keeping coolant in the right range for reliable starts without stressing components.
This heater slips into a smooth, molded 1" hose with a slight rise and a direct path to the engine. Plug it into any 120V outlet and you're set. If the cord ever gets damaged, just swap it out and keep the heater working season after season.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a quick look at the Zerostart lower radiator hose heater. Now, farm mornings and job sites don't stop for freezing weather. This hose heater is going to warm coolant before it reaches the engine block. So your engine, such as in your tractors and skid steers and generators are going to turn over easier and run smoother all winter long. So you're not going to have to worry about overheating or wasted energy with this heater because it has a built-in thermostat that's going to automatically regulate the heat, keeping coolant in the right range for reliable starts without stressing the components.
This heater is going to slip into a smooth molded one inch hose with a slight rise and a direct path to the engine. And then you're just going to plug this into any 120-volt outlet and you're going to be good to go. If you notice here, by the way, this plug plugs into your standard outlet does have a tethered cap on it to keep those prongs clean when it's not in use. So that's a nice touch. And so this hose is also, I'm sorry, this cord rather is also removable.
So if for whatever reason this cord gets damaged, you're not going to have to replace the whole heater. All you have to do is replace that cord. So let me go ahead and give you some overall measurements. You're going to get about 300 or up to 375 watts of heating power. And this does have a maximum heater temperature of 245 degrees Fahrenheit.
So the overall height, we are, looks like we're pretty close to about three inches or so. Then the overall width, again, right at about three inches. And then the overall depth, about two and a half inches or so. Kind of difficult to show that. It is CSA certified.
And this isn't recommended for automotive or live truck applications. Instructions are also included to guide you through the installation process. But if you happen to have any other questions about this heater or anything else that we carry, don't hesitate to reach out to us. We want to make sure that you're getting exactly what you want and need. Well, that's going to wrap up our quick look today. I hope it was helpful for you. Again, my name is Andy. Thank you for joining me.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.