Recommended Trailer Hitch And Wiring For 2004 Chrysler PT Cruiser

Updated 05/04/2017 | Published 05/03/2017

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(99)

$224.93

1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs

(3870)

$14.78

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs

(3870)

$10.46

Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs

(2273)

$35.26

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2273)

$49.29

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(48)

$59.42

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2932)

$2.87

Question:

questions about a trailer hitch and wiring for 2004 pt cruiser touring edition . question is does the wiring come with the hitch and it was showing no drilling how does that work it is just bolted on and where does the bolt /s go and how can the wiring work my lights are accessed from light itself ? can not get to light from under car or inside car it is only accessed from removing the light cover it self

asked by: Michelle

Expert Reply:

The trailer wiring is not included with a trailer hitch for your 2004 PT Cruiser. We do offer them separately.

There is no drilling required for the installation of the Curt Trailer Hitch, part # C11132. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I have attached a link to an installation video for this hitch on a PT Cruiser you can check out. As the video shows, the trailer hitch uses the tow hook mounting locations on the vehicle frame after they have been removed.

The recommended ball mount is part # C45521 and the pin and clip is # F-4.

For a hitch ball I recommend part # C40018 for a 2-inch ball and part # C40001 for a 1-7/8 inch ball.

For trailer wiring I recommend part # C55532. This harness just plugs into the wiring behind the taillights and you then need to run a hot lead wire to the positive battery post. I have attached a link to an installation video for this harness. The taillights will need to be removed to attach the harness.