Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Specs:
Use the wood beam socket to add standard lumber to an E Track anchoring system. Simply attach a piece of 2" lumber to a couple sockets and then clip the sockets into your E Track or Snap-Loc anchors. You can create adjustable and removable shelves, beds, and dividers in your truck, trailer, or toy hauler.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steve here with etrailer.com. Folks, today we're looking together at our E-track wood beam socket for a standard two-inch lumber, or a two by four. Now you're gonna get one, quantity one, of these. This is gonna make your adjustability and versatility of shelving easy, because you're gonna create a removable and adjustable shelf bed divider, whatever you want, by using your standard two-inch lumber or what we call a two by four, basically that 1 11/16 inside width here. That board will fit in there and provide a secure holding place for the boards.
You could then put screws, bolts, whatever you want through the sides and even the bottom of that board to make sure it's very safe and reliable as well. This is a durable zinc-coated steel, so you're not gonna worry about rust, corrosion, anything like that. It's great for organizing cargo, again, building maybe a bunk or just custom trailer setups and those kind of things, and it's gonna create support for those wood beams and those structures. And again, it's standard E-track. And as you know, it's spring loaded here to then get it back out of the E-track when it's time to remove it.
Folks, that is gonna wrap it up for our quick look together. I'm Steven. As always, if you have questions or concerns, or if you got some photos of this in use in your trailer, show us your setup. We'd love to hear about your experience with the product. Have a good one.
.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
I purchased E track and accessory's. All the straps and E track are awesome products.
Shipping was fast arrived in three days.
offers GREAT flexibility in my Cargo trailer, shelves can easily be moved.
Only improvement would be to enlarge the front holes to accept a tie-down hook, or S-hook, that way i don't have to change out to a O-ring as often.
Etrailer supplied the equipment I needed at a great price and shipped the the northwest coast with on days from when I placed the order.
All the e-track hardware and equipment was in stock and arrived packaged very well with no shipping damage.
The e-track is heavy duty, much more than I had expected and it was easy to install.
Looking forward to upgrading my trailer even more from etrailer.
Thanks again!
The E Track 2x4 fasteners worked very well with the Vertical E Track in my new 6 x 12 enclosed cargo trailer. They are simple to install on the end of your 2 x 4 lumber and hold in place any shelves mounted on them. The locking pins insure they will not come out while in motion.
I purchased these beam sockets to go with the vertical E-Track system.
Another great product. Strong,easy to adjust,fits a 2x4 stud of your choice.
After installing my complete system I jumped,layed,and climed on unit and was impressed.
Unit showed no signs of stress .....I'm 6'1 and weigh 255 lbs.
This system will hold up to just about anything you throw at it.
Purchase the E-Track and beam sockets without hesitation......you won't be sorry!
Is the only practical way to create part of the horizontal support frame for a sleeping platform in the trailer. Works fine for this use.
If I could give this 10 stars, I would. I'm a High School Band Director who uses a trailer to get instruments from performance venue to school and back. My previous trailer didn't have any E-track hardware and I just did the best we could. There was always a great deal of shifting of equipment during transport. Now that my current trailer has E-track hardware, I can secure all of my equipment easily and quickly reorganize the entire trailer according to the job's requirements. If you've not got E-track, get it. It's more than worth it's cost in saving of time and convenience.
This product does exactly what it is supposed to do. It locks easily into E-Track, and holds a 2" board. The company that I work for uses about 100 a year, and we have not had any problems.
Bill D.
4/25/2018
It is a good product that does what it was designed to do. No complaints.
Modified this cargo trailer to haul RC airplanes(too big to fit in my pickup) and remove the upper deck to make it useful for hauling other items. This makes a truly utility cargo trailer. Numerous tie downs with Etrack is really great. I have other pics if your interested. I just purchased an enclosed car hauler and I plan on installing Etrack in it. Thanks for making great products !
I used these moveable brackets to hold a shelving unit I made for my utility trailer. With them installed I have a ton of storage and when removed I can fit two ATV's inside. Very versatile.
Mike W.
12/20/2017
Still a solid product that made my trailer extremely versatile. Great company to do business with.
I used these to build a bunk and shelf unit in my Sprinter van. As I’m a rather big and tall guy I was a little nervous the first time I climbed into the bunk. Between the etrack and these 2x4 supports gave me a great night sleep. For the bunk and later the shelf I used 4 etracks and 4 of these 2x4 supports, and two 6’ 2x4s and a plywood base at 3/4” thick. After I tied everything in the supports were all strong and solid. I could turn over on my side and never felt any rocking motion or unsteadiness. I highly recommend the etrack and the portable 2x4 etrack hangers.
George N.
4/20/2020
The project worked out very well for about six months. But since then Imhave remodeled my van and built a bunk with storage. I saved the etrack wood beam sockets just in case I come up with another idea for them. They worked great and I’m happy that I kept them.
I think these are excellent products. I created a tire rack in my car trailer by installing E- track, supplied from E-trailer as well, on both sides of my trailer at a height equal to the height of my track car tires +3" from the top of the trailer. My car's hood actually goes right under near the tire rack and shelves. These E-Track Wood Beam snap into the E-track. I bought 2 - 2"X4"X8' pieces of wood for every beam I installed into the E-track across the trailer. For 6 beams, I need 12-2"x4"x8's of wood. I doubled every beam with 2-2"x4"x8' for strength. To do this, I used 2-1/2" coated deck screws and screwed them together. On both ends, where the 2"x4"x8's rest in these E-track Sockets, I separated the beams with the use of 2 washers per screw. That allows one 2"x4"x8" to slide down and rest in the E-Track Wood Beam Socket. I drilled holes in the beams to match up with the oval shaped holes, and then thru bolted the beams into these E-Track Socket brackets, so that the wood beams are secured in the brackets.
The total cost for each beam is approximately $15.00 vs. buying a pre-made AL E-Track beam for app $100. I'm using 6 beams for my needs. 2 beams for the tire rack, and 4 beams to create 2 shelf units. The shelf units will require a sheet of 1" 4'x8' plywood, which I will cut into 2-2'x8' sheets, and screw into the bottoms of the beams with cut outs to go around the E-Track Sockets, to create the shelves. Pretty easy, and pretty cost effective. The trick to this project is taking time to install the E-Track correctly at the correct height, and even as measured side by side. I "measured twice, and drilled once" when installing the E-Track. It's not rocket science, but take your time with it, double check the mounting points, the height, and position, and you'll be very happy with the project.
As always, buying all the material from E-Track helped make this project a snap and saved some serious money over the AL E-Track beams!
Jim M.
10/6/2015
Everything has worked out perfectly. A beam solution using these e-Track beam brackets designed for wood 2x4s weighs more than an aluminum beam, but it cost less than 110th the price! I built 6 beams, so I saved $500 ! It is worth doing this solution!
I used them to make shelves in V of the trailer and it's working great
Used these to build 3 removable and adjustable shelves into the front of my enclosed trailer.
Was looking for an way to add removable and moveable shelving to my enclosed trailer. These are super quality
OMG!!! I LOVE these!! All types of movable shelving is possible with these brackets!!
Product came in earlier than estimated and in great shape. Here are my 2x4 brackets installed in my trailer. Will put boards on top of the 2x4's and have a shelf for boxes when moving.
Worked perfectly. Used for a cross country move. Built a platform inside the trailer for all of the lighter weight and delicate items.
Not only simplifies adding shelving, but makes the completed shelves removable, and adjustable. I only had about 13 inches to work with in my utility trailer, but I was able to get everything off the floor. (Also used vertical E-track.)
Haven't used them yet, I'll get back to you in a few days.
UPDATE
I have finished my project with the e-track 2x4 holders. I installed a shelf in the front of my race trailer. The holders fit the e-track a little sloppy, but that was not an issue for me as I have everything tied together. The brackets could be a little narrower. I had to shim the 2" width to make the wood fit snugly.
Pictures attached ,use them if you want.
As requested, here are some pics of my e-track installation. I find the raised e-tracks in the floor very problematic and dangerous so I made sure they were recessed. This is now an extremely versatile cargo trailer.
Worked absolutely perfect to secure motorcycle front wheel chocks in my vintage '84 toy hauler. Using three lengthwise rows of your E-Track, these brackets allow me a flexible removable system to carry one or two various motorcycles on either side of the little 8' wide hauler. Thanks for your selection of great stuff, and your excellent prompt service.
I have a 14 foot flat roof trailer, and live in New England where snow gets wet ad heavy. I searched the internet for solutions, but nothing available. So I used your x-track vertical and e-track wood beam sockets to build an internal ceiling support system to prevent the roof from sagging under the weight of snow. After spending much time looking for solutions on the web, and coming up empty, this simple solution occurred to me.
I received the products just as described it too about 4 working days.
I plan on building shelves into my enclosed trailer for camping gear.
Brad B.
11/14/2014
Great 2x4 mount they are low cost and work well.
Do you have a question about this E Track?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
J.t.
9/29/2024
Performs as expected. Working as a pair, they support the weight of two adults plus bedding without any signs of stress.