Can the Vertical E-Tracks Be Used Horizontally on a Trailer Side Rail
Updated 04/09/2013 | Published 04/08/2013
Question:
the siderails on my traire are not wide enough for the 5inch wide, but the vertical are narrow enough
asked by: David C
0
Expert Reply:
Yes, you can use E-Track # E19146 on your trailer side rails. The Horizontal or Vertical indicates which way the slots on the bar run. But ideally you would use the vertical running slots if mounting on a wall or side rail. I included a link to a video review of E-Tracks for you.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
- E Track
- E Track Rails
- Vertical
- 3-1/2 Inch Wide
- 4 Feet Long
- Erickson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can Horizontal E-Tracks Be Secured to Vertical E-Tracks
- Q&A: Is There a Way to Create a Second Floor in an Enclosed Trailer Using E-Track Components
- Q&A: Using E-Track to Make Bunk Beds Inside of an Enclosed Trailer
- Q&A: 2016 Forest River Ford E350 Brake Controller Port Location
- Q&A: When Flat Towing a Vehicle How Much Tongue Weight is on the Trailer Hitch
- Q&A: Brake Controller Installed on 2015 Ram 2500 Only Showing 1 Volt of Output When Tested
- Q&A: Replacement Hub for a Hub Stamped H1000 R
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Brake Controller Installation: Starting from Scratch
- Article: Determining Trailer Tongue Weight