Replacement OEM Wiring Harness for Ford F-150
This item does not fit your vehicle
2022 Ford F-150
These items fit your vehicle
2022 Ford F-150
Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone, Ryan here at etrailer. Is the four-way flat factory connector on your Ford missing, damaged, or even just chopped into from a previous owner like ours is today Then if so, check this out. This is the Curt OEM Replacement Four-Way Flat Harness and we're gonna be showing you how to install it on our 2017 Ford F-150. Here's what that Curt wiring kit is going to look like once it's installed on your truck. And really not a whole lot to it. You know, it's a great solution for those of you whose original ones got damaged or cut into, whatever the case may be.
It utilizes the factory type connection so it just plugs right in and you're gonna have that four-way, right, so you get your turn signals, your brake lights and your tail lights. It's gonna work exactly the same way that your OEM one did. Now a couple things I do wanna mention as far as mounting this up. So a lot of these trucks have a factory bracket where your four-way flat connector originally was. This won't just, you know, pop right back into there, you know what I mean It's not gonna fit into there and get held in place so you're not able to reuse this at least without modifying it.
I suppose, one thing that crossed my mind, is you could maybe drill a couple holes there and use a zip tie or something like that. What I chose to do was just run it over here to our trailer hitch around the safety chain openings, secure it that way. And I used about a foot long piece of wire loom too, just to kind of cover everything up, help it blend in a little bit better. Another option for mounting would be to use a bracket like this, a four-way flat bracket. You can pick these up right here at etrailer.
You know, you could mount it to the bottom of your bumper beam or something like that and secure it that way. You know, doing that would allow you to feed that through there and have a little bit better of an installation look. Other than that, not much to talk about. You know, that's really about it. I think it's really convenient that there's an option like this for those of you who find yourself in that situation where you need a replacement end.
Curt even makes wiring harnesses that'll tie in to your existing factory wiring and convert it to a seven-way round type connector as well. So if that's what you're looking to do, you can always check this out if need be. As far as the installation goes, I mean really nothing to it at all. You literally unplug the existing connector, plug this one in, route it over here and secure it how you like. But if you want to hang around, see where that connection is and things like that, feel free to, we'll go ahead and get started on this now. To begin your installation, you're gonna be underneath the back of your truck on the driver's side. and it definitely helps if you temporarily lower or remove your spare tire. Just gives you a lot more room to work, so I've done that. But we need to locate our factory connector plug, which is this one right here, kind of sitting on top of this cross member. And we'll go ahead and unplug our existing stock damaged harness. So that's what it looks like. And what you wanna do, there's a little tab and it kind of helps, honestly, when this is already plugged in, if you push it tighter together, push down on that tab real hard and then pull the two apart. That's how you separate 'em. You could take our new harness now that end's gonna be the same, just plug that right in. There is gonna be a white wire that has a pre-attached ring terminal and that's gonna need to be grounded. I'm just gonna use the provided self-tapping screw and secure it to this clean piece of metal right here. (tool banging) What I've done now is just routed our wiring. I used a couple zip ties just to secure it, but dropped it down, brought it along through here, dropped it out down by our trailer hitch. And in our case, I just use the dust cover to secure it to the safety chain opening. Now it is a good idea to test your wiring just to make sure that it's working properly. I like to use a tester like this as opposed to just plugging into a trailer. And I say that because if the trailer happens to have any issues, it could mislead you, thinking it's something you did wrong on the vehicle side. With that in mind, we'll try our left turn signal, our right turn signal, we'll hit our brakes and turn on our taillights. Now that we know it works, you can go ahead put the spare tire back into position if you ended up lowering yours. And just to help kind of clean up our installation look, I decided to add about a foot long piece of wire loom to cover up our wires there, just to help it blend in a little bit better. But with all that done, that'll finish up our look at and our installation of the Curt OEM Replacement Four-Way Flat Trailer Wiring Harness on our 2017 Ford F-150.
This harness for my Ford F-150 was a perfect fit. When I bought my truck it had a hitch but no light harness and everywhere local wanted $50+ dollars. This was an excellent price and so easy to install. Took me a few minutes. All you need is a power screw driver to screw the ground wire down and plug in the harness and that’s it. Definitely recommend this to anyone!
I can not be happier with the service and product. I received the Draw Tite Class III trailer hitch on time as expected. From start to finish and by myself, it took me exactly 15 minutes to install. I did not need to lower spare tire and it looks clean and neat on the truck. It took me longer to open the cardboard box. Thank you for your great service and follow up and I will highly recommend you in the future.
After an long search to find this products ETrailers was the only company I could find to carry this product. I will definitely continue doing business here. Great communication, great product and extremely quick shipping.
Item fit perfectly to factory harness and was easy to install. Works great.
Happy with your wiring harness good prompt delivery will use for future purchases.
I was told that I had to go thru Ford to get the part I needed and it was $65. I got the part thru etrailer for a fraction of the price. It was delivered very quickly and was exactly what I needed. Thank you etrailer!!!!
Perfect replacement, took care of my rapid left-turn signal flasher and dim driver-side brake-light.
Great price. Everything fits as it should. Installation videos are awesome.
I highly recommend this product and company. I actually received a phone call about the status of my part from a real person and you surly don't get that anywhere else. Nice job guys!
FAST SHIPPING GREAT CUSTOMER SERVICE!!!
This harness worked great and plugged right in as advertised.
I strongly recommend etrailer for all your towing needs.
Simple plug and play!
F-150 2011
4 wire plug excellent part no problem on install
Would of been 5 star , but ground wire terminal was too small for OEM ground , i had to
Replace terminal for correct size to fit my application
Fast and E-Z Thanks
A year later and I'm still happy with my purchase!
Great product and excellent fit.
Everything is doing fine
Quick and efficient delivery
Great product.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Travis
11/23/2023
It fir perfectly and works great. No issues so far.