Recommended 7-Way Plug For A 2013 Ford F-150
Updated 03/24/2020 | Published 03/23/2020 >
Products Featured in This Question
Question:
I need the female plug for a 2013 F150rd will mightyn cord A10-7W6 work?
asked by: Bill E
Expert Reply:
The Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable part # A10-7W6 is the trailer side plug. I believe you are looking for a female 7-way plug for your 2013 Ford F-150. The Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable part # A10-7W6 will plug into a 7-way plug on the truck.
If you have a factory tow package on the 2013 Ford F-150, you can use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # C55774 which will plug into a port under the bumper.
If you do not have a tow package, you may need to hard wire in a 7-Way plug with part # ETBC7 which comes with all the components needed to install a plug on the truck. Please keep in mind you will also need a 4-pole connector for this as well. If you have a factory tow package, you will need part # C56110 if you do not you will need to hard wire in a 4-pole connector like part # C58044. I have attached a helpful article for your reference.
If you are talking about a plug in the bed of the truck for a goose neck or fifth wheel trailer setup, you need 5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Plug part # 50-97-410 which plugs in line with the existing 7-way plug and gives you another plug in the bed of the truck to make hooking up the fifth wheel or goose neck trailer easier.
Product Page this Question was Asked From
Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable - Trailer End - 6' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 7 Blade
- Plug and Lead
- Mighty Cord
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How Many Additional Panels Can Be Added To The Rich Solar RV Solar Charging Kit RS37VR
- Q&A: Circuit Configuration in RV-Type 7-Way Trailer Wiring
- Q&A: Replacement Trailer Hub/Drum for Part Number 2420801
- Q&A: Installation of Emergency Break Away Cable Repair Kit for Dexter Axle A-60 Brake Actuators
- Q&A: What Brakes and Bearings do I Need for My PJ Dump Trailer with Tandem 7K Axles?
- Q&A: Replacement Seal for Cool Hub on a 2000 Ranger Bass Boat Trailer
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Lighting Requirements
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Measure Your Trailer Wheel Bolt Pattern




