Best Ford Bronco Mud Flaps

I have a 2022 Ford Bronco Outer Banks(4 Drs 2.7L V6). You do need to drill the outer three holes for the rear bumpers. The screws supplied are not meant for these bumpers. The product itself is great. It covers a huge area.

I had to drill three holes

Had to take the front crash guards off to install the custom fit mud flaps. Easy install, look good.

Not a good fit on Bronco - big gap very visible. Rears OK

The mud flaps are high quality they fit and look great

Received my products fast as usual. Reviewed the instructions that came with them and must say they are very clear, to the point and easy to understand. Love doing business with eTrailer!

Front and back Weathertech mud flaps fit like a glove on my 2013 Ford F-150. About a 25 minute install and all four were on even without using instructions. (Man Thing ;~) Difficult part was getting plastic plugs out of rear lower fender well. Think they look great but you be the judge as I've attached a pic.

Bought 2 sets of these, one for a 2013 Ford F150 and one for a 2014 F150. The price was the best that I found and the flaps went on really easy. It took me only 15 minutes to put the second set on. They looked liked a factory accessory on the trucks.The free shipping on orders over $99 was a plus. The delivery was quick, actually got them a day earlier than I expected. I have already looked at some other things that I intend to buy from etrailer after my hunting trip is over. Etrailer kept me in the loop by letting me know when the items were shipped and when they would be delivered. Great job and service from etrailer!

Delivered timely and installed easily. Great product.

Good

These mud flaps are a perfect fit for on my 2024 Ram 2500 Power Wagon and Rebel Trucks and look fantastic. No-Drilling or modification needed, just remove the factory screws and install the mud flaps using the 3 removed screws.

Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.

Easy to install and remove.

I recently added a 6-inch lift and larger tires to my truck. The tires stick out approximately one inch outside of the wheel well. This immediately increased the amount of rocks I was slinging every time I pulled out of my 400-yard-long gravel driveway. We bought a travel trailer and the last thing I wanted to do was sling rocks at it non-stop or take the chance of busting a window. We all know how high the RV tech labor rates are. I opted for this product to prevent a more expensive issue down the road. The pros: They work as you'd expect them to. They are adjustable, both in height and width. You can shorten the actual flaps by cutting them and a hole punch is provided to create new bolt holes. They are easily removed when not in use. The cons: Whoever wrote the directions may have been half asleep. In one step they'd say do something one way, then the next step another way. Super confusing but most of us can figure out how to install them. The flaps are not attractive to the eye but they get the job done. They are overpriced but I convinced myself to purchase them by knowing if it saves one puncture to the front hull of my camper or one busted window, they've paid for themselves. I'd buy them again, even though I'd still mumble under my breath how much they are overpriced.

I installed a complete set of flaps on my 2013 Suburban. The flpas were fairly easy to install, but for my SUV they do not use the clips that many pictures illustrate. The factory hardware will hold it in place, but I strongly suggest that you drill the additional hole for the inside edge of the flap and secure it with the additional bolts provided. With 17" wheels the clearance is tight and that additional bolt will assure that when you turn the wheels lock-to-lock it will not pull the flap out from the liner to which it is attached on the inside.

Well first of all Weather Tech is a popular brand a little pricey my belief in life is you want something to last pay a little more. Recieved mine today beautiful. Have not had a chance to put. them on rainy hard.

Ordered these universal units as I knew I would need to trim them down to fit the 9-1/2" wide fenders on my 1967 USMC M416 trailer. It's a little project I'm still working on; but I wanted something to protect the tail / brake lamps from rocks, debris, or water thrown up by the tires in front of them, and these mudflaps will do the job nicely! Thanks etrailer

Excellent basic flaps for a multitude of applications

I have not had a chance to use the flaps yet but, upon assembling them, they are certainly heavy duty. Construction seems very good with aluminum and stainless steel bolts. One of the trim pieces arrived with scratches on it. After writing customer service, a new trim piece was mailed to me. Definitely a plus doing business with etrailer!

Fairly easy to install, instructions do call out a specific torque, so a torque wrench is a good idea. The flaps are heavy and should last a long time. The 2" etrailer shows from the bumper to the drop on the ball mount should probably be 2-1/4" The only con I can find, the height is not easily adjustable, you have to remove and redrill the flaps. I set mine at 5" and need to raise them to 7". They drag when I pull into the driveway.

The product did what I wanted it to do. It kept stones and debris from hitting the camper. However, when you cut the flap to a height that is compatible to a good running height ( 4" above the road) the flap drags going in and out of parking lots. On one trip it drug so often the flap had a tear at the mounting bracket. I sent an email asking if I could purchase just the flap but I got no response. So I improvised and put another metal bracket joining both sections of the flap.

Very easy to install and looks great. I shimmed my receiver hitch to ensure it did not wobbel. Protects my fifth wheel from gravel and road debris.

These mud flaps are a perfect fit for on my 2024 Ram 2500 Power Wagon and Rebel Trucks and look fantastic. No-Drilling or modification needed, just remove the factory screws and install the mud flaps using the 3 removed screws.

I ordered a set of weathertech no drill mud flaps for my new 2022 Colorado and they fit great and easy to install. Well after a couple of weeks I put on GM flares so I had to order another set for flares. Same thing excellent fit and easy install. Quick shipping and good service.

Installed the weather tech mudflaps from e-trailer today. Very nice and easy to install. The hardest part was opening the box ! Really ! Like always, received on time. You guys are the best !