Most Popular Manual Jack for 2019 Ram 1500

Rated a 4 because I won’t be able to attach it to trailer after winter but as for the construction of the lifts very well made heavy duty as of now I recommend it when I finally hook it up I can reevaluate my findings

I purchased this JA-5000S-B Sidewind jack for my 20' Car Hauler because I added a Harbor Freight toolbox that was taller than my top wind jack. This one is somewhat taller than the one replaced and moves the wind handle toward the truck. In my case the tailgate still drops and clears the handle by 10" or so. The jack is a little slower than the last one but has a higher weight rating (5000 lbs) etrailer always helps with the selection and has been a great resource.

Existing job site trailer jack broke Thursday. Menards, Home Depot, Northern tool, Mill didn't have the needed style in stock. Ordered it up and got here on Saturday. Perfect fit and higher weight rating than previous jack. Cranks smooth.

7000 lb trailer jack with grease fitting is smoother than I expected. Great Value. Easy on line order and great shipping. Thanks for the attention to my order

Great product, just what I was looking for. I've purchased 8 of these Jack's in the past few months and very happy with them. 2 days at my door after placing order to witch is impressive

Helpful and courteous as always. I order all my trailer parts from Etrailer, and I install a Fulton XLT on all my trailers. They are worth the extra money.

Awesome Jack. Got tired of replacing jacks every 6 months or so due to rusting out from salt on the roads. Decided to go with quality and very glad I did. Love this Jack. Cranks so easy and can tell it’s going to last.

Use this jack to replace the original on our camper. Much sturdier than the original. Very easy to install.

After the gears on my original/stock A-frame sidewind jack had stripped and failed (BAL 2000 mounted on my 2017 Forest River Rockwood mini-lite model 2306 with a dry weight of 4005 lbs), I replaced it with another BAL 2000 sidewind model which lasted less than 6 months before the gears also had stripped and failed. After reviewing numerous A-frame jack sidewind models, I decided to purchase the Bulldog A-frame sidewind model with a rating of 5000 lbs and a 15" lift. I also purchased the corresponding foot pad to help with the distribution of weight. The installation was straightforward and simple and so far, I have not experienced any functional issues with the jack. For anyone searching for and in need of a high quality and capable A-frame sidewind trailer jack, I would highly recommend this particular model.

Great product! Easy to install!

I needed a swing jack for my 25' boat trailer, to move it around without hitching to my truck. As you can see, by the pictures, I bolted on a 10" lawn / garden swivel caster to the foot of your jack. This way I can drop the jack down and raise the original jack up (which has a too small wheel that sinks into my soft yard). In this way I use my lawn tractor to move the boat around my yard. Hitched to my truck and the rig is to long to maneuver.

Direct replacement for tongue jack on Aluma car haulers

Easy to install. Rugged and easily adjustable. Second trailer I’ve used this jack.

Jack works great. Damaged the original when I forgot to lift the foot and hit my concrete parking apron. After I straighten out the mount this jack fit the hole perfectly and works great.

Instillation was very easy and it works amazingly. My trailer had a electric jack before and I was always having to maintain a battery, now I don't he to mess with that and it lifts super easy. I highly recommend this jack for enclosed trailers or heavy tongue weighted trailers.

Perfect replacement for my jet ski trailer. Easy installation and fast shipping from etrailer. Thanks!

Easy install to provide greatly improved unhitched trailer handling. This item was the final component to complete a refurbished trailer for my catamaran. My project started with a 1987 Calkins single-axle used trailer, adding the following E Trailer parts: 1. Miro-Flex Trailer Stop/Turn/Tail Light unit 2. CE Smith V-Wing Bolster Brackets 3. Rectangular Trailer Reflectors, Adhesive Mount - Amber 4. Erickson Hide-A-Hook Truck or Trailer Anchors 5. Pro Series Snap-Ring Swivel Marine Jack and completed with a hand-built frame assembly and covered bunk boards.

This was the third jack for an tandem enclosed cargo trailer that weighs about 7000 pounds loaded. The trailer belongs to a Non-profit living history group of which I am the "Seneschal" which essentially means the guy with the truck big enough to pull the trailer. My responsibilities also include repair and maintenance of all of the gear and the trailer. The original jack was damaged and I had purchased a "speed jack" from another company and installed it last October and did not use the trailer until April of this year. One use and that jack failed. Upon dissection I discovered that the Chinese manufacturer failed to lubricate it and the bearings were rusted and in various stages of disintegration. After a bit of cursing and a bit more internet research I found etrailer. Once I abandoned the idea of a "speed jack" and went with the drop jack, I found that etrailer had what I needed at a competitive price. Calling etrailer lead to a delightful experience rich with excellent customer service with likes of which I have never experienced in my 58 years. I ordered it and was pleasantly surprised when etrailer upgraded my shipping for free. The parts even arrived a day earlier than the upgraded date. I have installed the jack and everything fit as promised. I have attached a picture. I must emphasize that this company has the best customer service that I have ever encountered.

Nice unit appears to be well built.

ETRAILER sales team always prompt in service, we always receive our order in a timely fashion.

Package arrived a day early. Jacks were just as I expected and best price I found. Can’t wait to get them welded on. Will be buying more jacks in the future. Best selection I’ve found as well.

If etrailer didn't have such a detailed website, I may have shopped somewhere else. But it was because they have a section where you can ask questions and get detailed answers that I decided to buy the Pro Series jack above. My ATV trailer jack is 2-1/4 " square at the top and welded to the frame. The large nut inside that moves the jack up and down had stripped. Couldn't find another nut anywhere - not locally or on the internet, nor would a machine shop make one for less than $200! Only options were to cut the old jack free and weld on a new one - or - scab parts from a new one and hope they would fit. I took a chance on the latter. Michael Howell really went out of his way to disassemble another of these jacks and measure the o.d. of the main screw inside for me. It was exactly what I needed! The jack came on time and was immediately placed on the operating table. Had a devil of a time punching the pin from the side gear, but after that, and a little grinding on the screw top, I fitted the lower half of the new jack to the gears and handle of the old one. Chock another one up for good old American inginuity and elbow grease! $77 and 2 hours later I had a brand new bouncing baby jack. No cutting, No welding, No Problem!! Pictures of finished jack included. Thanks guys! This saved me well over $100, and now I can go 4-wheeling again!

Ordered two on Thursday at 7:30 pm and they arrived Monday before noon to central MN. The box was a little beat up but neither were damaged. Very well built product and very smooth cranking. Mounted on the back corners of a 3000 lb. fishhouse that was a travel trailer. We had to replace the bumper as it rusted out and the existing jacks only had a 7" lift with no drop leg. Now we won't have to jack and block, jack and block. The free shipping was the deal maker as they weigh 22 lb.s each. I would recommend this product.

Worked perfectly for supporting the rear of the trailer for loading my tractor Mounted one on each side on rear of trailer

Good inexpensive jack. I ordered two. My use for them is somewhat "off label". My 19" 9000# capacity flatbed trailer has a label on the dovetail indicating that the rear of the trailer should be supported for any loads over #3000. Personally I think supporting the rear for a trailer is always a good idea when loading and unloading. It puts less strain on the rear of the trailer and it prevents the trailer from lifting the rear of the tow vehicle during loading which can be extremely dangerous. I had a friend weld the tube mounts on each side of the rear of the trailer. See pictures below. Now I don't need cribbing or chunks of wood to shove under the rear of the trailer. These will also adapt well to uneven ground. They can be stowed horizontally, like in the picture or removed when not needed.

Great jack fit a worked as advertised. Service and shipping was fast

Bought the jack for a very heavy no till grain drill. Jack was well built and handled the tongue weight fine

The item was delivered two days after ordering. The package arrived with all part and installation instruction inside. The installation was easy for an average DIY. After the installations I manually moved the trailer with 17 foot boat with ease. I would buy this product again from E-trailer. Great service.

Your products are reliable and ship quickly. Have used etrailer for many years for a lot of our trailer parts. You are great partners!

Mounted on the bottom of the new trailer jack i bought from etrailer. Everything works as advertised. Fair price and great customer service

seems to be good frame jack

The jack was in stock, the shipping process started immediately, and it was delivered when promised! Thank you.

My order was accurately filled and shipped quickly. I have dealt with etrailer for several years and they have always provided good value.

I was not knowledgeable in different kinds of trailer jacks, but I was looking for a weld-on trailer jack replacement for an old (2006) Trail-Rite trailer (see pics). I had to talk to a couple of etrailer people, and after doing some of my own research on the site, I found a Fulton replacement that was a perfect to replace my old Fulton. If you have this type of jack, which seems to be not very popular anymore because it appears most people are using bolt-ones now, this should fit. Keep the nut and bushing from your old jack (bushing goes inside the recessed area of the mount). The new jack will not come with those parts. The new jack mount does not seem to be built as heavy/sturdy as the Fulton it replaces, but I guess that's standard these days. Also, most places don't seem know these types of replacement jacks still exist, and few places will carry them in stock, so etrailer is the place to go.

Good jack, however the hole for the lock was smaller than the hole on the trailer mount.(Zieman) hence it was not a direct replacement and I had to drill the hole in the trailer a bit larger. The jack swings only one way now, which is fine, but as I said it is bnot the exact replacement as the website stated.

We've installed these on several trailers for out autorestoration and custom welding shop in detroitlakes mn, we also build bumper jacks and other lifting equiptment out of these. Etrailer sells them at the best price ,and packaging/shipping was impressive too. Even beaten half to death, scratched, dented, left in the weather, mud and rust, these things still work effortlessly, theyre the only way to go and easy to hook to hyraulic, chain, motor or cable drives for hands free operations !

this trailer jack is easy to lift your trailer. It also has grease fittings to keep it turning easy. Good product

The jack on my cattle trailer wore out. I ordered a replacement from etrailer and within a couple of days the new jack was delivered. My son, a welder, cut the old jack off and installed the new jack. The new jack is so superior to the old one. The ability to turn the jack parallel and out of the way is great. I am sending before and after photos. Thanks for the great service and product!

The action is smooth and the construction sturdy. A+