View Cart
Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs

Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs

Item # PS1400300303

lowest price pledge

Our Price: $46.64

Trailer Jack

Orders above $99 qualify for Free Shipping

Shipping Weight: 14 lbs

Quantity: 
In Stock, Ships Today
Pro Series Side Frame Mount Jack - PS1400300303
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos


  • Side Frame Mount Jack
  • 2000 lbs
  • Topwind Jack
  • No Drop Leg
  • Swivel Jack - Pull Pin
  • Bolt-On
  • Pro Series
  • 10 Inch Lift
  • With Foot
Retaining-ring mount fits up to a 3" x 4" tongue and lets you easily swing jack up for travel and down for use. Jack has 11" retracted height and measures 4" from mounting bracket to top, excluding handle. Lowest Prices for the best trailer jack from Pro Series. Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs part number PS1400300303 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (157)
  • Q & A (45)
  • Videos (1)
  • Photos
  • Why etrailer?

Pro Series Trailer Jack - PS1400300303

Retaining-ring mount fits up to a 3" x 4" tongue and lets you easily swing jack up for travel and down for use. Jack has 11" retracted height and measures 4" from mounting bracket to top, excluding handle.


Features:

  • Utility jack is perfect for agricultural and commercial applications
  • Convenient, spring-loaded, plunger-pin swivel feature
    • Swing up to stow parallel to tongue for travel
    • Move back into upright position for use
  • Precision-fit parts provide exceptional stability and reliability
  • Topwind handle has smooth, ergonomic design for easy cranking
  • Outer tube has black paint finish
  • Inner tube is zinc plated
  • Bolt-on mounting bracket, mounting hardware and footplate included


Specs:

  • Bracket height:
    • 11" Retracted
    • 21" Extended
  • Lift: 10"
  • Clearance: 4" from mounting bracket to top of jack
  • Application: up to 3" x 4" trailer tongue
  • Handle length from center of jack: 7"
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Lift capacity: 2,000 lbs
  • Limited 1-year warranty


140030 Fulton Bolt-On Retaining Ring Swivel Utility Trailer Jack - Round, Topwind, 2,000 lbs

1401160317 Eclipse Round Retaining Ring Swivel Jack, Topwind, 10" Travel, 2,000 lbs

1400300303 Pro Series Round Retaining Ring Swivel Jack - Topwind - 10" Travel - 2,000 lbs






California residents: click here


Video of Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Pro Series Trailer Jack - Side Frame Mount Jack - PS1400300303 Review

Today were going to take a look at the Pro Series round snap ring swivel jack part #: PS1400300303. Now Pro Series covers this jack with a limited one year warranty. It has a lift capacity of 2,000lbs. Its a bolt-on design for trailer tongues and frames up to 3 inches by 4 inches. Included with the jack is the mounting hardware that youll need to secure it to the frame. The jack is used with 2 inch tubing and it has a black finish on the outer tube.

The inner tube as well as the footplate thats welded to it are finished in a zinc plating to protect against corrosion. Now were going to go over a few measurements. From the center of the mounting bracket to the top of the jack weve got about 4 inches. Were also going to go over the bracket height of the jack, thats from the center of the bracket down to the bottom of the footplate. When the jack is fully retracted like we have here it measures in at 11 inches.

Now we have another jack, same model thats fully extended. Again, when we measure from the center of the bracket down to the bottom of the jack we get 21 inches. The difference between the two, 10 inches, is our jacks lift or travel. Once you have the jack bolted to your trailer frame youll be able to swivel it up and out of the way when youre pulling your trailer down the road. Youll pull this release pin and flip the jack up, that way you dont run the risk of damaging the jack against the ground.

Its a top wind setup with a nice handle that makes it easy to operate the jack. And thats it for our quick look at the Pro Series round snap ring swivel jack part #: PS1400300303.


Customer Reviews

Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs - PS1400300303

Average Customer Rating:  4.9 out of 5 stars   (157 Customer Reviews)

Retaining-ring mount fits up to a 3" x 4" tongue and lets you easily swing jack up for travel and down for use. Jack has 11" retracted height and measures 4" from mounting bracket to top, excluding handle.

- PS1400300303
by:

Easy installaton. Great product. 155713



- PS1400300303
by:

I can only give this a GOOD rating because the shipment didn't include the mounting hardware as indicated. Somehow it was overlooked when the order was boxed for shipment. One quick phone call to etrailer and the install kit is on the way. Customer service was great and I hope to get the parts I need this week so I can install it this next weekend. 162767


Comments

Quick response from customer service and the jack installed quickly. Jack works great even after a year of use. Great product.

Tom M - 12/01/2015

16022

- PS1400300303
by:

Works just fine. Here's a photo of it in use. Mounted to 100 gallon portable fuel tank with 15gpm pump, meter, fuel separator. Unit is eco-friendly as it's self powered by a single solar panel constantly charging the battery that runs the pump. 54284



- PS1400300303
by:

I borrowed my nephew's trailer and bent the jack on it. Your jack saved the day, and the way it folds up will keep it from getting bent like the first one. Here are some pics, the original bent one, the new one installed, and the new one folded up. 25238



- PS1400300303
by:

The trailer jack that I bought from etrailer has worked beautifully in every way and I would recommend it to anyone. While I am praising etrailer I would like to note that I built my trailer because I needed a specialized trailer to carry a railroad handcar that is transported weekly to do rail maintenance work. I knew how to weld but I had no previous experience of trailer building. I found the etrailer website and experts available by email or phone to be very helpful in guiding me in the purchase of many parts for the trailer. These pars, including such things as tail lights, wiring and hitch have been faultless. I particularly recommend the axleless torsion suspension. The set I purchased performs superbly even on very rough roads. My experience with etrailer was so pleasant that it makes me want to build another trailer just so that I can deal with etrailer again. 303050



- PS1400300303
by:

I needed a swing jack for my 25' boat trailer, to move it around without hitching to my truck. As you can see, by the pictures, I bolted on a 10" lawn / garden swivel caster to the foot of your jack. This way I can drop the jack down and raise the original jack up (which has a too small wheel that sinks into my soft yard). In this way I use my lawn tractor to move the boat around my yard. Hitched to my truck and the rig is to long to maneuver. 365133


Comments

Works good

Chuck - 04/10/2018

37136

- PS1400300303
by:

Installation was simple. Suggest using two rachets, one on the bolt, on eon the nut. Makes it really quick. Good Product. 249387



- PS1400300303
by:

This jack is perfect. It fits my trailer well, seems well built, and was easy to install. Some of the other jacks I looked at locally seemed like they were mounted loosely and would rattle around. This one is tight against the trailer and doesn't rattle while driving. 141023


Comments

Hey Josh, this is Tim. I know this question has nothing to do with the jack which I have ordered but what kind of spare tire bracket do you have?

-- comment by: Tim - 12/18/2014

8093
Comments

Hi Tim,The spare tire bracket is a Fulton bolt-on spare tire carrier. It fits nicely with the jack on my trailer.

-- comment by: Josh M - 01/01/2015

8331
Comments

Josh, thanks for the follow up. We currently offer these Fulton Spare Tire carriers: # FETCHL0700, # FETCHL0700, # FETCSTL0701, # FHDSTC0101, and the # FSTC1000301.

-- comment by: Rachael H - 01/05/2015

8404

- PS1400300303
by:

Awesome hitch. Reliable, well designed and constructed. 655620



- PS1400300303
by:

Everything was top notch, from the searching, ordering, purchasing, tracking, delivery, and product and price were right on. Even had follow up contact. Good stuff! 655555



- PS1400300303
by:

This is a significant upgrade to my old jack. Excellent quality and construction. 641713



- PS1400300303
by:

No mounting hardware. Otherwise a quality product. 636651



- PS1400300303
by:

Used this jack on my 20" car hauler. The wide base is perfect for the sandy soil here in Arizona. It has performed flawlessly. 615521



- PS1400300303
by:

Been one year, still a good jack. Gets used by several different operators and gets its fair share of work. Is holding up fine. 605466



- PS1400300303
by:

Purchased to replace a center mount jack on my utility trailer. Works well, and allows clearance for my tailgate to fold down with the jack in place. 597658



- PS1400300303
by:

Great jack keeps my boat trailer in pla ce 585487



- PS1400300303
by:

This is a nice heavy duty jack. I've given up on the 1,000 and 1,500 lb. jacks because they are generally pretty flimsy. It is well worth spending a couple of dollars more to get something sturdier. I'm using the jack on a teardrop trailer, which is kind of over-kill, but the flat base keeps the trailer very stable when I'm moving about inside. And the black color matches the trailer frame. The top crank handle keeps the whole package very compact. Highly recommended regardless of your application. 582524



- PS1400300303
by:

Excellent, Fast Service. 575924



- PS1400300303
by:

Great product....Easy to install....Well made. A little camo and it was done! 570929



- PS1400300303
by:

Awesome product! This is what you need if you are a landscaper and have a trailer attached going into dump. I’ve went through 5 regular jacks in 2 years. This is Phenominal! Well made too! 519908



- PS1400300303
by:

Works well. Very smooth and lifts trailer effortlessly. 510553



- PS1400300303
by:

Bought as a replacement jack for my clamshell snowmobile trailer. The 2000lb weight limit is overkill my application but will last for years to come. 510240



- PS1400300303
by:

Product arrived promptly and was easy to order. Highly recommend shopping here. 508339



- PS1400300303
by:

Replaced an 8-year old welded jack on my Cargo Trailer by removing the snap ring and mounting new unit. Prevented cutting and welding hassle. 498181



- PS1400300303
by:

The utility Trailer came with a tongue jack but I could not open my tail gate when hooked -up. This add-on swivel jack solved the problem. 492140



- PS1400300303
by:

Easy to mount, fit my trailer perfectly. Works great - unpin and rotate to put it up and out of the way for travel. 483839



- PS1400300303
by:

Like I said I’m another review from a different product I’m very happy with everything I purchased from the trailer very happy with the shipping time and I am sure I will be buying more from you thanks 481163



- PS1400300303
by:

We are happy with this jack. It is exactly as represented on the website. It arrived promptly. No complaints! 473882



- PS1400300303
by:

I ordered a variety of products from etrailer.com to help build a custom rooftop tent trailer for a 8 week road trip. These included 2 different jacks to stabilize the trailer, wheel blocks, coupler and hitch locks, and a receiver/hitch for installation on my 2008 Honda Fit Sport. While researching and building my trailer, I was very pleased with the variety of products available on etrailer.com. It quickly became my go-to, one-stop site for all my trailer related parts. After 8 weeks on the road, all the components are still going strong and I am looking forward to many more years of adventures with my trailer! The specialty coupler and hitch locks were great for peace of mind on such a long trip, especially for the numerous occasions where my trailer sat unattended for a long duration while my girlfriend and I were out hiking, climbing, or backpacking 465960



- PS1400300303
by:

Good quality, easy install, and quick delivery. Can't ask for more. 456491


Comments

I am very pleased with it.

Robert - 12/02/2018

46305

- PS1400300303
by:

Came quickly, easy to install, works gr eat 452192



- PS1400300303
by:

Great product and service. 448968



- PS1400300303
by:

If you've ever had your trailer and boat tilt-up while you've been working in your boat's stern area, a pair of jack stands (port and starboard sides of trailer) is a great solution! 414244


Comments

The trailer jack is working fine and meets my expectations. Thanks.

Gary S - 08/03/2018

41882

- PS1400300303
by:

Good product. Has held up very well even thou the trailer sits outside. 410454



- PS1400300303
by:

Bought this Jack, knowing it was heavier than it needed to be, for my little trailer. But I am sure glad I did. Nothing flimsy about this Jack, well made. Should last me a long time. 403782


Comments

Still totally happy with this jack, glad I purchased one with the flat plate instead of a wheel, that way it does not roll around. It is used on a small Tear Drop trailer, therefor you do not want it the trailer to move when youre in it.

Ed M - 07/13/2018

40880

- PS1400300303
by:

THE PRODUCTS LOOK GOOD, BUT THE SERVICE WAS GREAT. THANKS 396294



- PS1400300303
by:

Easy to install and use. 379051



- PS1400300303
by:

I bought this to install on a friends utility trailer that I borrow a lot, which didn't have any type of tongue jack. The old one had been torn off a long time ago. This was a little tricky to mount as the trailer was made of 4" angle iron but I made it work. This jack really better suited to square/rectangular tube but it works just great for me. 372887



- PS1400300303
by:

Bolted on without a problem, and works great. 365216



- PS1400300303
by:

Bought it to use on a large log splitter. Hooking and un-hooking the splitter is now much faster, easier, and safer. 345572



- PS1400300303
by:

Arrived on time and as advertised. Great product, action is smooth and good quality construction. 349231



- PS1400300303
by:

The jack is great. It works flawlessly in all types of weather. Furthermore, it has taken all sorts of abuse without affecting usability. I have actually left the jack down on a few occasions; barely a scratch. It is definitely built to last. 344643



- PS1400300303
by:

Very sturdy jack with heavy duty parts. Easy installation and unit arrive already partially constructed. All I had to do was attach the jack to the trailer, overall time took less than 15 min from start to finish. Highly recommend for a small trailer that needs a compact jack. 342983



- PS1400300303
by:

So far so good! installed with no probl ems, 339309


Comments

Great! Easy Install, Built tough!

brent p - 02/06/2018

34346

- PS1400300303
by:

The order came today in a very timely manor. Everything looks great. I'll be installing everything soon. 332988



- PS1400300303
by:

Jacks are well made and easy to install on my trailer 328305



- PS1400300303
by:

Works great.... 327648



- PS1400300303
by:

I put this this jack on my 5X8 utility trailer and it works very well. I use the trailer for hauling firewood and it holds everything I have put on the trailer. 317832


Comments

Still working great

Eugene R - 11/18/2017

31055

- PS1400300303
by:

Very easy to install 317754



- PS1400300303
by:

I appreciate a company that underpromises and overdelivers. I chose the least expensive shipping method which was to arrive in 5-8 days. Shortly thereafter I received an email stating etrailer.com would express my product (for no extra charge) and got it in 3 days. Amazing service, the order packed carefully and the product (trailer jack) looks well made - especially for the price. Thanks! 308024


65
172
Show More Reviews

Ask the Experts about this Pro Series Trailer Jack
Do you have a question about this Trailer Jack?


  • Installing a Swivel Jack on the Frame of a Cargo Trailer
  • The etrailer Round Snap Ring Swivel Jack w/ Footplate # TJB-2001S-B is a swivel jack that is designed to be welded on to the frame of a trailer. If you are looking to use hardware to install a jack rather than welding the jack to the frame, I recommend the Pro Series Round Swivel Jack # PS1400300303. The Pro Series jack is a bolt-on swivel jack that includes the hardware needed to mount to your trailer frame. This jack will fit frames up to 3 x 4 inches. The jack is similar in cost...
    view full answer...

  • Availability of Bolt-On Trailer Jack That Can Fit Round Tube Trailer Frame
  • You are correct that all bolt-on trailer jacks require a square or rectangular frame member for installation. There is no bolt-on jack made for a round tube trailer frame since this would make securing the jack rather difficult; it would want to rotate around the frame tube whenever it was under load. You will need to have some steel material welded to your frame to allow jack installation. You can use a pipe-mount type like Pro Series # PS1401060303 which includes the weld-on pipe section. The...
    view full answer...

  • Trailer Jack Solution For Jack that Hits Tailgate When Down
  • The # PSEA20000103 is one of the shortest A-frame jacks we offer from the mounting bracket to the top of the jack at 11 inches. The best solution I can recommend would be to go with a side mounted trailer jack like part # PS1400300303 that would install on the trailer frame behind where your current jack is so that you would have tailgate clearance when needed.
    view full answer...

  • Can Trailer Jack With Mounting Plate Be Installed On Round Trailer Tongue
  • It would be difficult to attach a jack like the Pro Series Trailer Jack, part # PS1400300303, to your 2.25 inch round tongue and secure it in a manner that would hold it in place unless you have a flat mounting surface welded to your trailer tongue. If you attach a trailer jack in a manner other than how it was designed to be mounted, the result can be unsafe and dangerous, as well as voiding the warranty by the manufacturer.
    view full answer...

  • Weight of a Whole Bunch of Different Trailer Parts
  • I'd be happy to let you know the weights of all of the parts you asked about, and I'll even do it in descending order. - Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs # A35RS545E: 134 lbs - Dexstar Steel Mini Mod Trailer Wheel # AM20545: 25 lbs - Pro Series Round, Snap-Ring Swivel Jack # PS1400300303: 13 lbs - Channel Tongue Trailer Coupler # CT-3002-Z: 4 lbs I have also attached links to video reviews of these parts for you to take a look at.
    view full answer...

  • Availability of Trailer Swivel Jack with Pneumatic Tires
  • If the tongue weight of your trailer is less than 500 lbs, the Trailer Valet Swivel Jack and Trailer Mover, part # STC-V211 might be a good choice. The jack swings up next to the trailer frame so it'll be out of the way of your truck tailgate and the jack features two pneumatic tires. This is the only jack we offer with pneumatic tires. If you click the provided link, you can see a demonstration video of the jack. The wheels on the jack are actually driven by one of the crank handles on...
    view full answer...

  • Will the Pro Series Round Snap-Ring Swivel Jack Bolt on a 2 Inch by 2-1/2 Inch Trailer Tongue
  • Yes, the Pro Series Round Snap-Ring Jack, # PS1400300303, will bolt around your 2 inch by 2-1/2 inch trailer tongue. This jack can bolt to frames up to 3 inches wide by 4 inches tall and will have no problem fitting on your trailer. I have attached a photo showing the bolt hole dimensions of this jack for you to check out.
    view full answer...

  • Recommended Bolt-On 2,000 Pound Swivel Jack for Trailer
  • The Bulldog Round Snap-Ring Swivel Jack # BD151464 referenced in your question is indeed a weld-on trailer jack. It is designed to mount onto the Weld-On Bracket # F500242 with the Snap Ring # BD500241. For a similar trailer jack that uses a bolt-on bracket, I recommend looking at the Pro Series Round, Snap-Ring Swivel Jack # PS1400300303. This 2,000 pound jack has a total lift of 10 inches and an outer tube diameter of 2-1/4 inches. The bolt-on bracket, mounting hardware and footplate...
    view full answer...

  • Jack Recommendation to Provide Max Ground Clearance
  • A swivel jack would be your best option. A swivel jack will swivel up and out of the way totally when not in use and will give you maximum ground clearance for when you are off-road. For a bolt on jack I would go with the part # PS1400300303. I attached a review video for you to check out. For a weld on jack I would go with the # PS1401440303.
    view full answer...

  • Will Pro Series Round, Snap-Ring Swivel Trailer Jack, # PS1400300303 Fit a 3 x 3 Trailer Frame
  • I went out o the warehouse to verify the measurements on the Pro Series Round, Snap-Ring Swivel Trailer Jack, # PS1400300303. It will fit either a 3 inch by 3 inch tall or a 3 inch by 4 inch tall trailer frame. I have made a picture showing the measurements of the bolt holes for you.
    view full answer...

  • Looking for a Bolt-On Jack That is Less Than 11 Inches When Attached
  • The Pro Series Swivel Jack # PS1400300303 that you referenced should fit fine in your application. In the picture of the jack that I have provided has the measurements indicated. From the center of the mounting bracket to the foot plate is 11 inches. If you measure from the center of your frame to the ground you will see that you will actually have about 1-1/2 inches of clearance. I have also attached a short video with the measurements listed as well.
    view full answer...

  • Side-Mount Trailer Jack to Avoid Tailgate Clearance Issue
  • Usually the best fix for tailgate-to-jack clearance issues is an extra-long ball mount that will move the trailer further away from the tailgate, such as # 80232, but since you are using a weight distribution/sway control hitch you cannot use this solution. So the best option in your case is to change to a side-frame-mounted jack instead of the tongue-mounted jack. The linked page displays all side-mount jacks, both jacks with caster wheels like # MT70149 and jacks with foot plates like...
    view full answer...

  • Swivel Trailer Jack with Enough Lift to get 20 Inches from the Ground to Bottom of Trailer Frame
  • With Pro Series Round, Snap-Ring Swivel Jack # PS1400300303 installed it will measure 21 inches from the center of the mounting bracket to the bottom of the foot. When fully extended that would make the distance from the ground to the bottom of the frame where the jack is installed 19 inches on a 4 inch tall frame. What I recommend is Fulton F2 Swing-Up Jack # F1413230134. This jack has a mounting bracket that can be raised or lowered on the outer jack leg. This means you can adjust...
    view full answer...

  • How to Fully Open Tailgate on Truck and Not Hit the Trailer Tongue Jack
  • The Roadmaster Dual Hitch Receiver, # RM-077-2, is designed to be used only when flat towing a vehicle. This product cannot be used when towing a trailer. Also, using any other hitch extension will cause you to loose 50 percent of your tongue weight capacity. If your truck hitch has a 300 lbs tongue weight rating, then using an extension will lower that rating to 150 lbs. The best option would be to go with a side mounted trailer jack, like the Pro Series Round Bolt-On Jack # PS1400300303....
    view full answer...

  • Overall Dimensions of the Pro Series Round, Snap-Ring Swivel Jack # PS1400300303
  • I went out to the warehouse and measured the Pro Series Round, Snap-Ring Swivel Jack, item # PS1400300303, for you. The Overall height of the jack fully retracted is 17 inches. The distance, fully retracted, from the center of the mounting plate to the top of the jack at the center of the crank mechanism is 6 inches. The handle sticks up another 2-3/4 inches when in the cranking position. From the center of the mounting plate to the bottom of the jack the measurement is 11 inches...
    view full answer...

  • Recommended Topwind Trailer Jack for 2004 Viking Pop Up Camper
  • For a replacement trailer jack on your 2004 Viking Pop Up Camper, I recommend looking at the Pro Series Round, Snap-Ring Swivel Jack # PS1400300303. This is a really nice topwind jack that will attach to trailer tongues up to 3 x 4 inches with the included bolt-on mounting bracket. This will give you 10 inches of lift and a lift capacity of 2,000 pounds. The bracket height when retracted is right at 11 inches. The jack features a spring-loaded, plunger-pin swivel feature that will allow...
    view full answer...

  • Which Trailer Jack Do I Need for My 1994 Mastercraft Boat Trailer
  • We do have some options for you, however we do not have anything that matches the bolt pattern of your current jack plate. Instead of trying to match the bolt pattern of the welded plate you can get a bolt-on jack that uses U-bolts to connect to the trailer. Which jack you need will depend on the weight capacity and height of your current jack. You'll also want to make sure the U-bolts will fit around the trailer frame. I've linked our selection of bolt-on jacks for you. A few...
    view full answer...

  • Replacing an Older Fulton Swivel Jack for a Bulldog or Pro Series Swivel Jack
  • All of our jacks have a 3 on 3 bolt hole pattern and what I recommend is switching to a bolt-on snap-ring swivel jack like the Pro Series Snap-Ring # PS1400300303 because it fits up to a 3 x 4 inch tongue and has an 10-inch lift and 2,000 pound lift capacity. Since you had the holes 2-1/2 inches horizontal and 3-inches vertical ours won't match up and hence the reason I would change to a bolt-on. Or, another solid bolt-on swivel jack is the Fulton Sidewind # FXP15L. It measures 14-1/2...
    view full answer...

  • Could The Pro Series Jack PS1400300303 Fit Enclosed Trailer
  • As long as his trailer has a tongue that measure up to 3 inch by 4 inch the Pro Series Jack part # PS1400300303 will fit it. Most likely it will though but if you can check that will be your best option. You can also email me a picture of the current jack on the trailer and the frame dimensions and I can make the best possible recommendation.
    view full answer...

  • Will Pro Series Snap-Ring Swivel Jack # PS1400300303 Fit on Mount for Older Fulton Snap-Ring Jack
  • My contact at Fulton advised that their Magnum pull-pin snap-ring swivel jacks used a mounting ring diameter (2-1/2-inches) that is slightly different than what their sister-brand Pro Series uses on their Snap-Ring Swivel Jack # PS1400300303. This Pro Series jack may fit on the mount for your Fulton snap-ring jack but depending on its exact age it may not be an exact fit. My contact recommended you use the brand-specific mount for your jack. We also offer pipe-mount type swivel jacks...
    view full answer...

  • Would the Pro Series Round, Snap-Ring Swivel Jack Fit Round Tongue Trailer with Bracket Installed
  • Sounds like you have a round tongue trailer that has a mounting bracket welded on it for a jack that match up with the mounting bracket of the part # PS1400300303 that you referenced. Normally we don't have a solution for round tube tongues aside from recommending they have a mounting bracket welded on. So since yours has one already that matches this jack this one should work well.
    view full answer...

  • Difference Between Pro Series Jacks Part PS1401140303 and Part PS1400300303
  • Some would argue that the handle setup on the part # PS1401140303 is a bit easier to use and folds down out of the way a bit tighter than the part # PS1400300303, but aside from that the jacks are internally the same.
    view full answer...

  • Can Pro Series 2K Swivel Jack PS1400300303 be Used on a C-Channel Trailer Frame
  • It sounds like your trailer has a C-Channel frame. You can use Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs Item # PS1400300303 with that type of frame. It is possible that the included hardware will still work with a 3-1/4 wide frame but if not you can get some longer bolts locally and use them and that is perfectly acceptable!
    view full answer...

  • Replacement Bolt-On Tongue Jack for Pole Tongue Trailer
  • I recommend that you replace the entire jack and mount since there is no way to know for sure that the mounting base (that is welded to the trailer tongue) is still strong enough. Even if not actually damaged from the incident, it could be old enough to have metal fatigue that makes a new jack the best option, as you noted. Pro Series jack # PS1400300303 and the Bulldog # BD154107 that you referenced are both 200-lb-rated topwind jacks with a foot plate. Both offer 10-inches of lift,...
    view full answer...

  • Will Pro Series Jack # PS1400300303 Fit Trailer Frame of 2 inch by 3 inch
  • Yes, the frame bracket of the Pro Series jack part # PS1400300303 can easily adjust to fit a 2 inch by 3 inch trailer frame like what you have. The brackets have several holes that can vertically handle varying heights and the threads of the bolts are long enough to allow it to fit thinner frames as well.
    view full answer...

  • Recommendation for Measuring Tongue Weight of Borrowed Trailers
  • I would think the trailers you are planning on towing will already have trailer jacks on them, but if they do not, the Pro Series Round, Snap-Ring Swivel Jack # PS1400300303 that you referenced is a great option. This jack will bolt around trailer frames up to 3 inches x 4 inches. The # PS1400300303 jack will be able to be installed and uninstalled as you need it. This jack has a footplate that will work well to place the jack on the Sherline Trailer Tongue Weight Scale # 5780. Using...
    view full answer...

  • How to Perform Oil/Grease Maintenance for the Pro Series Jack # PS1400300303
  • I reached out to my contact at Pro Series who sent me the maintenance schedule for the Pro Series Jack # PS1400300303. You will need to remove the jack cover and essentially oil and grease all of the moving parts. I have attached the maintenance schedule they sent me so that you can reference it.
    view full answer...

  • Would the Pro Series Round Snap-Ring Swivel Jack # PS1400300303 fit on a 2 x 2.5 inch Trailer Frame
  • The Pro Series Round, Snap-Ring Swivel Jack # PS1400300303 that you referenced can fit trailer frames up to 3 inches by 4 inches. Since your trailer has a 2 by 2-1/2 inch frame this jack would work for you well. The bracket would just be a little larger than needed.
    view full answer...

  • Recommendation for a 2,000 Pound Capcity or Higher Snap-Ring Swivel Trailer Jack
  • I went out to the warehouse and pulled the 2 jacks that would most likely fit and meet the needs of your application. First, I measured the Pro Series Round, Snap-Ring Swivel Jack, # PS1400300303, that you have referenced. This jack has a bolt hole pattern of 4-1/2 inches vertically and 5-3/8 inches horizontally (the mounting plate can be turned to flip those measurements). This is a 2,000 pound capacity jack with 10 inches of lift. Next, I measured a higher capacity 5,000 pound jack,...
    view full answer...


Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Expert Research:
Michael L
Expert Research:
Maggie M
Written by:
Lindsey S
Expert Research:
Robert G
Installed by:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Updated by:
Adele M
Expert Research:
Adam R
Updated by:
Laura H
Expert Research:
Lori W
Expert Research:
Jeffrey L
Updated by:
Alexander C
Photos by:
Jeffrey L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924