1. Trailer Jack
  2. Pro Series
  3. Side Frame Mount Jack
  4. 2000 lbs
  5. Sidewind Jack
  6. No Drop Leg
Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 2,000 lbs

Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 2,000 lbs

Item # PS1401060303
lowest price pledge
Retail:$54.90
Our Price: $36.01
You Save: 34%
Trailer Jack
Orders above $99 qualify for Free Shipping
Shipping Weight: 12 lbs
*Attributes in bold are required.
PS1401060303 - Weld-On Pro Series Trailer Jack
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 11-3/16" retracted height and measures 5-7/16" from mounting bracket to top, excluding handle. Lowest Prices for the best trailer jack from Pro Series. Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 2,000 lbs part number PS1401060303 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (56)
  • Q & A (25)
  • Videos (1)
  • Photos
  • Why etrailer?

Pro Series Trailer Jack - PS1401060303

  • Side Frame Mount Jack
  • 2000 lbs
  • Sidewind Jack
  • No Drop Leg
  • Swivel Jack - Pipe Mount
  • Weld-On
  • Pro Series
  • 10 Inch Lift
  • With Foot

Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 11-3/16" retracted height and measures 5-7/16" from mounting bracket to top, excluding handle.


Features:

  • Utility jack is perfect for agricultural and commercial applications
  • Tubular swivel design lets you swing jack up for travel, down for use
    • Included pull pin holds jack in place
  • Sidewind handle has smooth, ergonomic design for easy cranking
  • Outer tube has black paint finish
  • Inner tube is zinc plated
  • Weld-on pipe mount and standard footplate included


Specs:

  • Bracket height:
    • 11-3/16" Retracted
    • 21-3/16" Extended
  • Lift: 10"
  • Clearance: 5-7/16" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Pull pin diameter: 5/8"
  • Lift capacity: 2,000 lbs
  • Limited 1-year warranty


1401060303 Pro Series Round Tubular Swivel Jack - Sidewind - 10" Travel - 2,000 lbs

1401060317 Eclipse Round Tubular Swivel Jack, Sidewind, 10" Travel, 2,000 lbs




California residents: click here


Video of Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 2,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Pro Series Trailer Jack - Side Frame Mount Jack - PS1401060303 Review

Today were going to take a quick look at the Pro Series Round pipe mount swivel jack part #: PS1401060303. Now Pro Series covers this jack with a limited one year warranty and it has a lift capacity of 2,000lbs. Were going to go over a couple of measurements real quick to give you an idea of the size and travel of the jack. From the center of our mounting system down to the bottom of the footplate we get about 11 inches. We have another one of these jacks that weve extended out all the way. Well take that same measurement again from the center of the mount to the bottom of the footplate and we get about 21 inches.

The difference between those two measurements, 10 inches, is known as our lift or jack travel. This is a side wind jack with a nice ergonomic handle that makes it easy to operate the jack. The outer tube is finished in a black paint and the inner tube as well as the welded on footplate are zinc plated for good corrosion resistance. The footplate is also going to provide a nice flat stable surface for resting the nose of your trailer on. Well flip the jack over to the back and you can see our mounting system.

its a weld-on jack where youll take this piece of tube out and weld it to your trailer frame. The jack body will fit over this tube and it can swivel and pivot on it. That way you can pull your jack up flat when youre towing your trailer down the road. You just have to remove the pin, turn it to where you need it and reinsert the pin. And thats it for our quick look at the Pro Series round pipe mount swivel jack part #: PS1401060303..


Customer Reviews

Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 2,000 lbs - PS1401060303

Average Customer Rating:  4.8 out of 5 stars   (56 Customer Reviews)

Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 11-3/16" retracted height and measures 5-7/16" from mounting bracket to top, excluding handle.

- PS1401060303
by:

Box can in all ripped up although everything was in there in good condition. Ted 545119



- PS1401060303
by:

As described. Great customer service. Way to schmooz the customer. I Mounted to my Tentrax camp trailer. 691657



- PS1401060303
by:

thank you for the fast shipping 652566



- PS1401060303
by:

These are really good people to do business with. They called to confirm our delivery address. Great prices and excellent service. 485353



- PS1401060303
by:

Heavier and stronger than I expected. Will be using this on an pull-out (1/2 ton) crane outrigger. Very low gear ratio. I can tell by the quality, it's going to last for ever. 456120



- PS1401060303
by:

As advertised 725680



- PS1401060303
by:

Fast service, as advertised, will work great on my utility trailer I will use etrailer again. Thank you 676640



- PS1401060303
by:

Very happy with the items I purchased. Extremely fast shipping! 610217



- PS1401060303
by:

Excellent product 10+ Customer service 586475



- PS1401060303
by:

As good as any jack you can buy and at a great price! Super friendly fast service. 580448



- PS1401060303
by:

shipping box had a hole in one side from one of the jacks lower foot. But all items were in the box and other then a few scratches things are okay.... 486445



- PS1401060303
by:

18 jacks ordered and delivered in days. Thanks etrailer! 458523



- PS1401060303
by:

Fast shipping, works great! 447595



- PS1401060303
by:

II needed this pronto. They took care of me quickly. Works great 439974



- PS1401060303
by:

The jack was exactly what i needed to stabilize my trailer, my lawn mower weighs in at 1250 lbs without me , add 205 lbs more. Great buy !!! 417453



- PS1401060303
by:

great price great product terrible shipping box 379123



- PS1401060303
by:

haven't yet installed but the service was great. 339507



- PS1401060303
by:

The products at etrailer are always of great quality ! They ship very fast, which helps my trailer business, and the staff are very helpful and knowledgeable ! Trailer jacks I ordered are excellent quality, bought 4. Pricing is very competitive ! 333705



- PS1401060303
by:

Used on a 12 foot Woods rotary cutter - works great. 307726



- PS1401060303
by:

As expected... 274017



- PS1401060303
by:

Seems to be a well built product, only time will tell. Arrived the next day too, what a bonus! 269032



- PS1401060303
by:

yep side wind short jack... just what the JD square baler needed. 251381



- PS1401060303
by:

Great design 240188



- PS1401060303
by:

Jacks work good have had no problems Like the ease of use have them on portable saw mill handy and easy to set up 239727



- PS1401060303
by:

Product worked as designed and are advertised. I ordered two and one of them did not show up with the piece that is welded to the trailer. I called etrailer and they sent me the part without any hassle. 226884


25
60
Show More Reviews

Ask the Experts about this Pro Series Trailer Jack

  • Trailer Pipe Mounted Swivel Jack with Retracted Length Measurements
    The Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 2,000 lbs # PS1401060303 has an overall length when retracted of 16-5/8 inches. This jack does not have a wheel. For a similar jack with a wheel, I recommend the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 2,000 lbs # BD1541150301 along with the Replacement Heavy-Duty, 6" Caster for 2" Diameter Bulldog Jacks - 1,500 lbs # BDCP555. Without the wheel, the retracted length of this jack is...
    view full answer...
  • Trailer Jack Recommendation for Kendon Motorcycle Trailer with Round Tongue
    There is no bolt-on jack made for a round tube trailer frame since this would make securing the jack rather difficult; it would want to rotate around the frame tube whenever it was under load. You will need to have some steel material welded to your frame to allow jack installation. You can use a pipe-mount type like Pro Series # PS1401060303 which includes the weld-on pipe section.
    view full answer...
  • Solution for Attaching Trailer Jack to Round Tube Trailer Frame
    You are correct that all bolt-on trailer jacks require a square or rectangular frame member for installation. There is no bolt-on jack made for a round tube trailer frame since this would make securing the jack rather difficult; it would want to rotate around the frame tube whenever it was under load. You will need to have some steel material welded to your frame to allow jack installation. You can use a pipe-mount type like Pro Series # PS1401060303 which includes the weld-on pipe...
    view full answer...
  • Availability of Swivel Trailer Jack that is Around 18 inches Tall in Overall Retracted Height
    The closest I can come to the measurement you mention is the Pro Series Pipe Mount Swivel Jack, part # PS1401060303. The total height of the jack when fully retracted is 16-5/8 inches tall, measured from the bottom of the foot plate to the top of the bracket where the handle assembly where the handle attaches to the jack tube itself. The center of the mounting pipe to the bottom of the foot plate measures 11-3/16 inches. This jack is a weld-on application, and you can see these dimensions...
    view full answer...
  • Can a Trailer Jack Attach to a Trailer with Round Tongue
    There is no bolt-on jack made for a round tube trailer frame since this would make securing the jack rather difficult; it would want to rotate around the frame tube whenever it was under load. You will need to have some steel material welded to your frame to allow jack installation. You can use a pipe-mount type like Pro Series # PS1401060303 which includes the weld-on pipe section.
    view full answer...
  • Recommendation for a Pipe Mounted Swivel Trailer Jack for a Home Made Trailer
    I believe I have just the jack for you. Take a look at Pro Series Round, Pipe-Mount Swivel Jack, # PS1401460303. I went out to the warehouse and measured this jack and it will fit around a 2 inch diameter tube and uses a 9/16 inch pin. It is a short jack at 11-1/4 inches retracted. It has more than enough capacity at 5,000 pounds for your trailer. I looked at a lot of jacks while I was out there and this one seems to be the best fit.
    view full answer...
  • Dimensions of the Pro Series Trailer Jack # PS1401060303
    We do not have access to CAD drawings for the Pro Series Trailer Jack # PS1401060303. I can tell you that the jack has the following dimensions: Bracket height: 11-3/16" Retracted 21-3/16" Extended Lift: 10" Clearance: 5-7/16" from mounting bracket to top of jack Inner tube diameter: 2" Outer tube diameter: 2-1/4" Pull pin diameter: 5/8" Lift capacity: 2,000 lbs I also attached a review video for this jack for you to check out as well.
    view full answer...
  • Extra Mounting Pipes for Additional Mounting Locations for the Pro Series 2,000 Pound Jack
    I have confirmed with my contacts at Pro-Series, and the correct mounting pipe for the Pro-Series Jack # PS1401060303 is the Bulldog # BD015279. This mounting pipe is 2-1/4 inches long, and is compatible with 5/8 inch pins, like what is used on the Pro-Series Jack you are considering. This mounting pipe requires welding for installation, so please make sure that the areas that you are going to install this jack are appropriate for installing this mounting tube. It is also recommended...
    view full answer...
  • Solution for Securing Jack Handle from Dragging On Ground In Trails
    Easiest way would be to use a strap like a bungee part # EM06912 to wrap around the handle and jack body to hold the handle to the jack.
    view full answer...
  • Available Pipe-Mount Type Side-Frame Trailer Jacks
    You will want to note the distance from the bottom of the jack foot to the center of the pipe mount. All such pipe-mount jacks are displayed on the linked page and these are offered in various weight capacities and with varying amounts of lift. You might care to have a look at the linked article as you consider your suitable choices.
    view full answer...
  • Can the Angle of the Handle on Pro Series # PS1401060303 Trailer Jack be Changed
    The crank position is fixed in regard to the location of the mounting tube, although I suppose it would be possible to remove and relocate the mounting tube. Keep in mind that moving the mounting tube from its position would probably cause the trailer frame to interfere with the operation of the crank. Perhaps a top wind style jack like the Pro Series # PS1400400303 would be a better choice for you. The jack has the same 2000 lb capacity and the identical 10 inch lift as the # PS1401060303...
    view full answer...
  • Replacement Pull Pin for 5000 lb Capacity Pro Series Sidewind Swivel Jack
    Are you speaking of the pull pin used to secure the jack once it is swiveled either up or down? If so, we offer a replacement. The part # is BD500231.
    view full answer...
  • What are the Measurements of the Flat Part of the Foot Plate on Pro Series 2K Pipe Mount Swivel Jack
    The flat part of the foot plate on Pro Series trailer jack # PS1401060303 is 2-3/4 inches by 5-7/8 inches. Adding a wheel is going to require modifying the jack somehow; either bolting or welding and that will void the warranty and could compromise the structural integrity of the jack. Another option is a cart such as # SL1500DR319-P which would cost about the same as 4 of the jacks. Jacks are not made to move things around so much. But this cart is and it has a 1,500 pound capacity;...
    view full answer...
  • What Is Total Overall Length and Width of Pro Series Trailer Jack # PS1401060303 When Retracted
    I walked out to our warehouse and took some measurements of the Pro Series Trailer Jack, part # PS1401060303. Yes, the Pro Series Jack # PS1401060303, will be able to rotate into a 17-1/2 Inch space if the the jack is retracted. The overall height of the jack when retracted is less than 17 inches, and will clear no problem. I measured the width of the mount and the tube and it measured 5 inches wide. The total width from the mount to the end of the handle measured 9-3/4 inches.
    view full answer...
  • What is Included with Pro Series Pipe-Mount Trailer Jack
    The Pro Series Round Pipe-Mount Swivel Jack # PS1401060303 includes the weld-on pipe mount. It also includes the 2 inch inner tube with a standard foot plate.
    view full answer...
  • Looking for Swivel Trailer Jack with Overall Length of 15 Inches or Less
    The closest I can come to the measurement you mention is the Pro Series Pipe Mount Swivel Jack, part # PS1401060303. The total height of the jack when fully retracted is 16-5/8 inches tall, measured from the bottom of the foot plate to the top of the bracket where the handle assembly where the handle attaches to the jack tube itself. The center of the mounting pipe to the bottom of the foot plate measures 11-3/16 inches. This jack is a weld-on application, and you can see these dimensions...
    view full answer...
  • Availability of Bolt-On Trailer Jack That Can Fit Round Tube Trailer Frame
    You are correct that all bolt-on trailer jacks require a square or rectangular frame member for installation. There is no bolt-on jack made for a round tube trailer frame since this would make securing the jack rather difficult; it would want to rotate around the frame tube whenever it was under load. You will need to have some steel material welded to your frame to allow jack installation. You can use a pipe-mount type like Pro Series # PS1401060303 which includes the weld-on pipe section. The...
    view full answer...
  • Side Mounted Trailer Jack Recommendation for a Trailer for Good Ground Clearance
    From the pictures I found of your 2016 r-pod 178 trailer it looks like you have an A-frame jack like the part # BD155032 that you referenced. If ground clearance is a problem with this jack one solution you have would be to replace the jack with one that attaches to the side of the trailer frame and can swivel. The Pro Series Jack part # PS1401060303 uses a pipe mount that would get welded to your trailer frame and would allow the jack to swivel up and out of the way when not in use.
    view full answer...
  • How to Choose the Correct Jack for a Small Utility Trailer
    When choosing a jack for your trailer you will want to choose a jack that has enough lift to lift the coupler over the hitch ball on the tow vehicle. I would recommend hooking your trailer to your truck and, with additional help, lift the trailer coupler a few inches above the hitch ball. With the trailer tongue lifted, find an appropriate location for the jack on your trailer tongue and measure from the center of the frame to the ground. This will tell you the approximate extended height...
    view full answer...
  • Swivel Trailer Jack with Bracket Height Under 12 Inches
    Rack and gear jacks like # BD169201 can get low with a bracket height when retracted of only 8 inches. But rack and gear jacks are low capacity, 750 pounds, and do not swivel. Another low option is Fulton fixed jack # TJ12220301 which can actually get lower than even a rack and gear jack. This jack measures a mere 9 inches from the center of the mounting bracket to the bottom of the wheel. But it does not swivel. The lowest I can get on a swivel jack with a wheel is 12-3/4 inches like...
    view full answer...
  • Fully Retracted Length of Fulton Swivel Jack Part # FXP10W0301
    The overall length of the Fulton # FXP10W0301 jack you referenced is just slightly less than 24 inches, therefore it would be longer than what you are looking for. I took a look at the rest of the jacks rated for 1,200 lbs, and found that they are all of roughly similar length. If a 2,000 lb capacity jack that uses a foot plate instead of a caster would work for you, I would recommend the Pro Series Pipe-Mount Jack, part # PS1401060303. Fully retracted, the jack measures 17-1/4 inches...
    view full answer...
  • How to Install a Bolt-On Swivel Trailer Jack to an L-Shaped Trailer Frame
    In order to bolt the Pro Series Snap-Ring Swivel Marine Jack, # PSEJ10000101, to an L-shaped trailer frame, I recommend having some steel plates welded to the trailer frame in order to make it a box frame in the location where you want to install the jack. This will provide the support the jack needs to be properly installed. Any welding should be done by a qualified professional welder. Another option would be to use a Pro Series Round, Pipe-Mount Swivel Jack, # PS1401060303. This is...
    view full answer...
  • Side-Mount Swivel Trailer Jacks that have a Retracted Height Less than 11-1/2 Inches
    We have pipe-mount swivel jack # PS1401060303 which, when retracted, has a height of 11-3/16 inches measured from the bottom of the foot to the center of the pipe mount. Are you looking for any specific features or capacity? If you are looking for an option with a wheel then Rack and Gear jacks such as # BD169201 can get very low (8 inches for this model). But the capacity is only 750 pounds. jack # BD162300 can get even lower at 6 inches. If the 750 pound capacity is enough for your...
    view full answer...
  • Which Swivel Jack for Trailer with 2980 GVWR
    You will want to choose a trailer jack that either meets or exceeds the tongue weight of your trailer. Typically, the tongue weight is calculated as 10 to 15 percent of the weight of the fully loaded trailer. Given the 2980 lb figure you provided, you would need a jack with a minimum capacity of 500 lbs. The Pro Series Swivel Jack you referenced, part # PS1401610383 would certainly work for you, but the 3000 lb lift capacity would be overkill, as you are only needing to support the...
    view full answer...
  • Recommended 2000 lbs. Trailer Jack to Allow the Most Clearance
    The shortest we have is about 13 inches from the bracket to the top of either the jack or the handle like the Pro Series Round, A-Frame Jack # PSRV20000103. Another option, since you may not get the clearance you want, is to switch to a side mount jack such as the Pro Series Round, Pipe-Mount Swivel Jack # PS1401060303 is a weld on jack. Or you can go with the Pro Series Round Snap-Ring # PS1400300303 for a bolt on option.
    view full answer...

Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Rachael H
Written by:
Lindsey S
Installed by:
Patrick B
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.