# 1
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
Haven't had a chance to use these yet. They are very solid. Have them stowed in the back of 2018 toyota highlander.
I recently installed a #76156 Draw-Tite Hitch on a 2016 Toyota Highlander. I used a multi-tool with a standard cutting blade to trim the splash guard and exhaust deflector. The vehicle had been Zei(xxxx) rustproofed, but, as I expected, uncoated areas were discovered when the splash guard and spare tire were removed. I treated the areas with a quality spray can undercoating before and after the hitch installation. I checked tyhe condition and pressure of the spare, and sanded some rust and sprayed a little black paint on the rim. I re-used the longer bolts for the tow hook to anchor the passenger side of the hitch, but did not cut the fascia. I sprayed all six holes and the bolts with lithium grease before installing the hitch. Here are the photos of the result. Hope this helps.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
# 3
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Needed a class III Ball Mount and Susan from etrailer.com provided excellent customer service skills helping me pick out the correct one for my Highlander. It fits great, is secure, and tows my trailer with no problem. Thanks, Susan!
Trailer hitch looks great, will work great this spring for trailer hauling projects.
# 4
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
# 5
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Yes Laura its a good thing. But I do dismount it when not in use lest I smash someones bumper when backing into a parking space. .
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 6
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 7
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Needed a class III Ball Mount and Susan from etrailer.com provided excellent customer service skills helping me pick out the correct one for my Highlander. It fits great, is secure, and tows my trailer with no problem. Thanks, Susan!
Super solid mount at a great price. Just the right drop for my boat trailer.
# 8
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
A great product- this thing is solid and well made. I love the double powder coating. I only wish the video review would have mentioned the shank length for the ball. They reviewed everything but the length. Trailer has always provided excellent service and truly provides great products.
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
# 9
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Needed a class III Ball Mount and Susan from etrailer.com provided excellent customer service skills helping me pick out the correct one for my Highlander. It fits great, is secure, and tows my trailer with no problem. Thanks, Susan!
It fits nicely and arrived quickly. Easiest installation ever! Thanks!
# 10
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 11
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 12
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Needed a class III Ball Mount and Susan from etrailer.com provided excellent customer service skills helping me pick out the correct one for my Highlander. It fits great, is secure, and tows my trailer with no problem. Thanks, Susan!
Works great!! I always order from etrailer Customer service and fast delivery
# 13
etrailer Ball Mount Kit - 3/4" Rise or 2" Drop - 7,500 lbs
Haven't had a chance to use these yet. They are very solid. Have them stowed in the back of 2018 toyota highlander.
I recently installed a #76156 Draw-Tite Hitch on a 2016 Toyota Highlander. I used a multi-tool with a standard cutting blade to trim the splash guard and exhaust deflector. The vehicle had been Zei(xxxx) rustproofed, but, as I expected, uncoated areas were discovered when the splash guard and spare tire were removed. I treated the areas with a quality spray can undercoating before and after the hitch installation. I checked tyhe condition and pressure of the spare, and sanded some rust and sprayed a little black paint on the rim. I re-used the longer bolts for the tow hook to anchor the passenger side of the hitch, but did not cut the fascia. I sprayed all six holes and the bolts with lithium grease before installing the hitch. Here are the photos of the result. Hope this helps.
# 14
etrailer Ball Mount Kit for 2" Hitches - 3/4" Rise or 2" Drop - 7,500 lbs
Haven't had a chance to use these yet. They are very solid. Have them stowed in the back of 2018 toyota highlander.
# 15
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Items packed well delivered on time. Doesn't get much better that that.
The service is great and so is the price. Box came damaged but if it installs as easy as the last one I bought from etrailer I will be very happy!
# 16
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
Nice finish, hopefully will hold up over time. Unfortunately it is rather loose inside the 2" hitch hole, I don't understand how hard it is to get a tighter tolerance. We used some electrical tape as others suggested, but I would expect more from this brand.
This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.
# 17
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 18
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs
Works fine, maybe a bit too long of a drop for a 2022 Highlander Hybrid
# 19
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
Fast shipping
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
# 20
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K
Nice finish, hopefully will hold up over time. Unfortunately it is rather loose inside the 2" hitch hole, I don't understand how hard it is to get a tighter tolerance. We used some electrical tape as others suggested, but I would expect more from this brand.
Perfectly as described, Box was a heavy hitch and the box must have been damaged in shipping so it was a little delayed. You can't mess up a forged hitch it still is in excellent condition.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."