Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs

See what our Experts say about this CURT Trailer Hitch Ball Mount

• 2" Ball Mount with 2" Drop, 2" Hitch Ball and Receiver Pin and Clip Made in The USA
  While the Curt Fusion Ball Mount # C45134 is made in China we do have their similar Curt Solid Ball Mount # C45312 that is made in the USA. You will need the 2" Hitch Ball # CB26C and Gen-Y Hitch Pin and Clip # 325-GH-096 to have all the parts made in the USA.
  view full answer...
• Is There A Curt Fusion Ball Mount Available With a 2-5/16" Hitch Ball?
  I do have an option for you as the Curt Fusion only offers ball mounts with a 2" Ball # C45134 or 1-7/8" hitch ball # C45131. The Curt Solid 2-Ball Mount # C45002 is a straight shank design with a 2" and 2-5/16" hitch ball welded in place like the Curt Fusion.
  view full answer...
• Parts Needed To Tow The Low Bed Micro Sport Trailer With A 2018 Toyota 4Runner With A 2" Hitch
  To be able to tow the Malone LowBed MicroSport Trailer # MPG464-LB with your 2018 Toyota 4Runner, you're just going to need a ball mount like the Curt Fusion Ball Mount for 2" Hitches # C45134 with a 2" hitch ball. To choose a correct ball mount will dictate on the measurement from the ground to the top of the trailer receiver, if it is less that 18" you'll need a ball mount with rise, however, if it's more than 18", you'll need a ball mount with drop. For example, if you measured 20"...
  view full answer...
• Is the Curt Fusion Ball Mount Welded or One Piece and Will It Hold Up to the Rigors of Towing
  I can assure you that Curt makes some of the most durable products on the market and these types of parts undergo rigorous testing during the product development stages, so it's been heavily tested in towing conditions and has proven to withstand all that can be thrown at it. Additionally, the Curt Fusion Ball Mount # C45134 has a lifetime limited warranty against defects and malfunction, which tells me that they're confident this will hold up for as long as you want to tow with it.
  view full answer...
• Can My 4 Cylinder 2011 Equinox Tow a 1,500 Pound Trailer?
  From what I could find, the 4 cylinder options of 2011 Chevrolet Equinox are rated to tow 1,500 pounds at the maximum. This can be verified by checking the inside door jamb on the driver door. There will be a label/sticker with all the capacities your vehicle can handle. As long as it confirms you can pull 1,500 pounds, you will be good to go. However, I will say that you should watch the weight when fully loaded to make sure you do not exceed your max capacity. With that being said, the...
  view full answer...
• Parts Needed for 2001 Jeep Grand Cherokee 4.0 liter to Tow 4,000 lb Trailer
  I looked up the towing capacity of your 2001 Jeep Grand Cherokee 4.0 liter and it can tow up to 5,000 lbs. So a 4,000 lb trailer wouldn't be a problem at all. So for a hitch the Draw Tite part # 75139 would be a great option. It installs easily and has more than enough capacity. Then for trailer wiring the Tekonsha part # 118369 is very reliable and installs easily. Then for a ball mount with a 2 inch ball you'd need the part # C45134 and you'd be set.
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?