etrailer Ball Mount Kit - 3/4" Rise or 2" Drop - 7,500 lbs
(1293 reviews)
Price: $61.31
In Stock
etrailer Ball Mount Kit - 3/4" Rise or 2" Drop - 7,500 lbs
Item # 989899
Our Price: $61.31
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (1293)
- Q & A (0)
- Videos (2)
- Photos
etrailer Trailer Hitch Ball Mount - 989899
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 2 Inch
- Rise - 1 Inch
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- 7500 lbs GTW
- Class III
- etrailer
- Ball Mount Kit
- Steel Shank - Gloss Black
- Steel Ball
Features:
- Works with 2" x 2" trailer hitch receivers (Class III)
- Kit includes:
- (2) Ball mounts with 3/4" rise / 2" drop (# 2923)
- Capacity: 7,500 lbs GTW and 750 lbs TW
- (1) 1-7/8" x 1" x 2-1/8" trailer hitch ball (# 19260)
- Capacity: 2,000 lbs GTW
- (1) 2" x 1" x 2-1/8" Trailer hitch ball (# 63845)
- Capacity: 7,500 lbs GTW
- (1) Pin and clip (# PC3)
- (1) etrailer Ball Mount Bag (# ETBMB)
- (2) Ball mounts with 3/4" rise / 2" drop (# 2923)
989899 etrailer Ball Mount Kit - 7,500 lbs
Video of etrailer Ball Mount Kit - 3/4" Rise or 2" Drop - 7,500 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for etrailer.com Ball Mount Kit Review
Speaker 1: Today we're taking a look at the etrailer.com ball mount kit, offering a three-quarter inch rise or a two inch drop, part number is 989899.Now the etrailer ball mount kit's gonna be the perfect solution for hauling multiple trailers with multiple vehicles, so we can get our trailer as level as possible while we head down the road. Now this is what's included in our kit. We're gonna have both two inch drop ball mounts, we're have the inch and seven-eighths inch ball, the two inch ball and then pins and clips for each of those to secure our ball mounts to the vehicle.I think this kit's gonna be ideal for somebody who needs a two inch drop, but has multiple trailers with different sized balls. That way you won't have to be switching them on and off your ball mount. As you can see, these are all gonna fit inside of the storage bag very easily. You see there'll be a little bit of extra room in there if you had some other supplies that you wanted to store.
It's gonna do a great job of keeping the dirt and grease out of your vehicle.Now the ball mount kit's been designed to work with class three, four, or class five hitches that have the two inch by two inch receiver tube opening, or some of the class five hitches, you'll have to use that adapter to bring it down to a two inch by two inch receiver tube opening.Now the ball mounts are measure from the top of the receiver tube opening, here. This is the two inch drop version, or three-quarter inch rise. As you can see, from that receiver tube opening edge to our ball platform, we have about three-quarters of an inch raise. If we're to flip that over, it's gonna give us two inches of drop. Now this ball mount, from the center of the hitch pin hole to the center of the ball, is about eight and a half inches.
That's really only gonna matter to you if your hitch is set in, underneath the vehicle, and you wanna ensure that you're gonna be able to get your trailer connected.Now the ball mount itself, it's gonna have a weight rating of 7,500 pounds as far as gross trailer weight goes, that's the total weight of your trailer and anything that you load up on it. It's gonna have a maximum tongue weight waiting of 750 pounds. That's the maximum downward force we can put on the ball mount.It's gonna have the hollow shank, that's gonna help us out with weight. They're not quite as heavy as a solid shank would. But this is also gonna work out really well if you wanna add an anti-rattle device that maybe has a nut that goes inside.
Shouldn't be an issue at all getting that secured.Now each ball's provided with the nut and the lock washer you're gonna need to secure it to the ball mount. The shank link is gonna be two and one-eighth of an inch long on both of them, and it's one inch in diameter. So if you already have some ball mounts at home and you're thinking you might wanna add them to it, just wanna make sure that size is gonna work for you.That'll complete our look at the etrailer ball mount kit. Part number is 989899.
Customer Reviews
etrailer Ball Mount Kit - 3/4" Rise or 2" Drop - 7,500 lbs - 989899
Average Customer Rating: 4.8 out of 5 stars (1293 Customer Reviews)
by: Chris02/22/2020
Easy to install and they feel really sturdy. Definitely recommend buying them with the carrying case as it makes them super convenient and easy to stow away when not in use.
by: Bryan02/19/2023
etrailer got my initial order wrong but remedied it very quickly. Thanks so much for making it easy. ;-)
by: Henry05/05/2020
This was my second order, and I couldn’t have been more pleased (again). The hitch came fast and in great condition. Great company!
by: Michael07/25/2019
Great product! Makes it much easier to switch ball size with 2 different trailers, one needs 1 7/8 ball and the other a 2" ball. solved the problem of needing to ball sizes. Also nice bag to keep and carry the draw bars in.
Michael
7/26/2020
great
by: Dan 10/29/2021
Great product.
Dan
11/6/2022
ball mount works well. no issues to date.
by: Lynn A.08/13/2014
Ball mount has nice finish. Hitch balls mounted quickly and I was ready to go. Carry bag big enough to hold two ball mounts plus other items such as tow straps or tie down straps.
by: Brian10/02/2019
Totally satisfied. Ordering was a breeze, shipping was free (heck ya!), and quick. I received my products within 3 days. I previously did not have any tow package equipment at all. My wife's cousin recommended me to etrailer, and I could not be more satisfied. Ordered Sunday, received Wednesday, installed Friday, made my first land fill trip Friday afternoon. Thank you etrailer for making this such an easy process.
by: Bo B08/08/2017
This was a very easy installation. The custom fit design was exactly what I wanted. Wife and I installed it ourselves. Saved us hundreds of dollars and it looks professional. The video was very well done. Thanks etrailer for having these products available. We will definitely be using your services again!!!
by: William 11/18/2021
Perfect fit. Love the 2 different ball & hitch. No need to take apart if I need the smaller one. Love the storage bag to keep it all together. Ps Snow chains are a perfect fit as well.
by: Todd09/30/2021
So far so good. Hitch appears to be well built and was shipped complete. The instructions are printed so small you need a magnifying glass to read them and photos on the instructions are poor -at best. That said - the video of the installation is excellent and a must review prior to installation.
by: Dave 08/29/2022
The customer service was excellent. Everything else required very little effort!
by: David H.04/03/2015
As always, my e-trailer orders arrive promptly. One of the items I ordered was out of stock. A member of the e-trailer team contacted my to suggest some alternatives. I really appreciate that level of care. It gave me the opportunity to choose a substitute part to allow quick delivery.
by: Susan 12/10/2021
Bought this to put on my Subaru Outback and it worked great.
by: Paul 07/26/2021
Giving 5 stars, but should have also ordered a hitch clamp to eliminate the loud rattling.
by: Scooter12/17/2014
It a hitch ball mount , well made
by: Weekender11/28/2012
Great quality product I like the storage pouch stores nicely by spare tire.
by: Michael05/05/2021
I received exactly what I ordered in a timely fashion. It appears to be excellent quality and was a fair price. What more could you ask for?
by: James02/10/2022
Worked as expected
by: Joe04/29/2021
Great deal on this purchase. Very good quality. The spec videos are very informative and are what sold me on this product. Great company and great website.
by: Douglas 09/10/2020
Items were received quickly and were in good condition. Package offer was a better bargain than separately.
by: Paul 11/16/2021
Great combo value pack. It's exactly as described.
by: CHARLES05/02/2023
by: Fred05/05/2023
by: Jim V06/15/2013
Received the order in good order. Everything fits.
by: Phil12/06/2016
nice package.
25
1291
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch Ball Mount
- Distance from Hitch Pin Hole to Ball Hole of etrailer Ball Mount Kit part # 989899The ball mounts that come with the etrailer ball mount kit part # 989899 have a distance of 8-1/2 inches from the ball hole center to the hitch pin hole center.
view full answer...
- Will the Draw-Tite Max-Frame Hitch Fit 1991 E150 With Dual Fuel TankI reached out to Draw-Tite and they told me the Draw-Tite Max-Frame Trailer Hitch Receiver # 75703 was never tested on a 1991 Ford E-150 with the dual fuel tanks. This does not mean it will not fit, it means it has never been tried. I am attaching a picture of the hitch installed on a van with the spare tire removed as a reference. Looking at this and the pictures you provided, it should fit on your van. The same crossmember that sits just behind your fuel tank attached with two bolts...
view full answer...
- Can Draw-Tite Trailer Hitch be Installed if Factory Hitch is Removed from a 2007 Ford F-150If the factory hitch is bolted on and not welded on then yes you could remove it from your 2007 Ford F-150 and install Draw-Tite trailer hitch # 75506. If you plan on doing some towing I recommend etrailer ball mount kit # 989899. It comes with 2 ball mounts with a 3/4 inch rise or 2 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have...
view full answer... - Difference Between etrailer Ball Mount Kit # 989891 and # 989899The difference between the two ball mount kits # 989891 and # 989899 is just that the # 989899 comes with two of the ball mounts that comes with the # 989891 and an additional hitch pin and clip.
view full answer... - Recommended Trailer Hitch for 2021 Subaru Crosstrek HybridThe Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 is confirmed to fit all models of the 2021 Subaru Crosstrek, including your Hybrid. This is a Class III hitch with a 2" receiver that will be perfect for any accessories or light towing you plan to do. It comes with all of the necessary hardware for installation and a limited lifetime warranty. If you plan on doing some towing, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118467 as well. This plugs directly into existing...
view full answer... - Reasons for 1 Hour 10 Minute Install Time for the CURT Hitch # 13013 on a 2002 Toyota TacomaThere are actually 6 bolts connecting the CURT trailer hitch # 13013, to the frame on the 2002 Toyota Tacoma, and the factory bumper will need to be removed and reinstalled to complete the installation. This will require disconnection and reconnection of the license plate light wiring, and correctly repositioning the rear bumper to complete the installation. Although the installation requires 1hr 10min to complete this is not a difficult installation to undertake. One tip I can offer is...
view full answer... - Recommended Concealed Hitch and Wiring for 2022 Honda OdysseyFor your 2022 Honda Odyssey I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit # 76170. From what we have found this hitch is the least visible. It has a concealed cross tube so you will only see the receiver hanging down below the bumper, giving it a factory look. For your wiring, the Tekonsha T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat # 118781 is the best choice. The T-One connector plugs directly into existing wiring...
view full answer... - Recommended Trailer Hitch and Wiring Harness for 2021 Jeep Grand CherokeeFor your 2021 Jeep Grand Cherokee I recommend the Curt Trailer Hitch Receiver # C13065. This hitch has a maximum gross trailer weight of 5,000 lbs and tongue weight of 500 lbs. The # C13065 may be used with a weight distribution hitch as well, which can increase the towing capacity. It also has a concealed cross tube, so only the receiver tube will be visible. This gives it more of a factory look and can help to reduce issues with clearance under your Jeep. The hitch is assembled in the...
view full answer... - Availability of Confirmed Hitch Fits for 2015 Nissan RogueYes, our hitch manufacturers Curt, Draw-Tite, and Hidden Hitch have confirmed that the 2014 model year hitches are also confirmed as a fit for the 2015 model year Nissan Rogues. My recommendation is a Class III rated hitch such as the Draw-Tite # 75902. This trailer hitch is rated for up to 3,500 pounds gross trailer weight and 350 pounds of tongue weight. It has a 2 inch receiver opening that is compatible with a wide range of hitch mounted accessories, and towing products. If you...
view full answer... - Will the Hands Free Liftgate Work on a 2019 Honda Pilot Elite with Curt HitchThe Curt Trailer Hitch Receiver # C13146 is not compatible with the Hands-Free Liftgate feature on your 2019 Honda Pilot Elite. However, Honda dealers do have a sensor relocation kit if you would like to move the sensor and still have the Hands-Free Liftgate. If you are fine without it, you can certainly leave the sensor where it is. This will not cause any problems. If you plan on doing some towing, you may also want the Tekonsha T-One Vehicle Wiring Harness # 118760. This wiring harness...
view full answer... - Recommended Trailer Hitch and Trailer Connector for a 2019 Mazda CX-5The trailer hitch I recommend for a 2019 Mazda CX-5 (Except Diesel) is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76138 which is a direct bolt-on fit with no cutting or drilling required. The Draw-Tite hitch has what is known as a concealed cross tube which essentially means you get the best finished install look. In order to tow a trailer you'll also need a trailer wiring harness, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118746 is our most...
view full answer... - Correct etrailer Hitch for a 2022 Honda CR-V That is Not a HybridYes, the etrailer Trailer Hitch Receiver # e98848 hitch is the correct etrailer hitch for your 2022 Honda CR-V. Basically with it saying that the hitch is "Hybrid" and "excluding Hybrid & Touring" it is saying that this hitch will work for your CR-V regardless of if you have the Hybrid model or do not. So the # e98848 is the correct hitch for you. If you are needing wiring to power your trailer's signal lights, you can use the T-One Vehicle Wiring Harness # 118741 which will provide a...
view full answer... - What is the Recommended Torque Spec for Installing Draw-Tite Hitch 75120 on 2002 Toyota Sienna XLEThe Draw-Tite Class III hitch # 75120 that you referenced will require two different torque specs for its included installation hardware. On each side of the hitch you will install the two M10 x 1.25 bolts, and one single carriage bolt. At right I have linked the installation instructions for your review and these include the torque specs for each of the fasteners. Any hitch will deliver its rated performance only when installed to the exact specifications laid out by the manufacturer. Also...
view full answer... - Will the Curt Hitch for a 2005 Hyundai Santa Fe Fit Models with Full Size SpareYes, the Curt Trailer Hitch Receiver part # C13505 which is an excellent bolt-on, assembled in USA option for a 2005 Hyundai Santa Fe will fit models with a full size spare tire. The spare will need to be lowered for installation but it can be raised back up into position when done. If you'll be towing then don't forget the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118473 and the etrailer Ball Mount part # 989899.
view full answer... - Hitch for Volvo 2017 V60 Cross Country WagonYes, the Draw-Tite # 75916 hitch that you are looking at is a confirmed fit for your 2017 Volvo V60 Cross Country Wagon. Additionally, it's "hidden" design means only the receiver will be showing in the back. I have attached a video of the 2016 model year install which is nearly identical to yours. If you plan to tow a small trailer now, or in the future, you will additionally need a trailer light wiring harness. Since you will be accessing the areas around the bumper and rear lights...
view full answer... - Can Rear Sensors Be Turned Off While Towing with a 2016 BMW X3In regards to towing with a 2016 BMW X3; you'll need a trailer hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76226, a trailer wiring harness like the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236, and a ball mount/hitch ball like the etrailer Ball Mount Kit part # 989899. In regards to the rear sensors, these should only be an issue while in reverse. I would check the in-dash settings to see if they can be disable while towing. If...
view full answer... - Tongue Weight Capacity of 2016 Subaru Outback 3.6R with etrailer.com Trailer Hitch ReceiverThe etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # E98847 will not increase the towing or tongue weight capacities of your vehicle but it can limit it. Trailer hitches are not rated for weight capacities on each vehicle but rather on the hitch itself as many hitches will fit different models and different years. For your 2016 Subaru Outback 3.6R the manufacturer lists your towing capacity at 3,000 lbs with a tongue weight capacity of 200 lbs....
view full answer... - Is Bumper or Fascia Trimming Required for Draw-Tite # 75713 Installation on a 2011 Dodge DurangoNo, the installation instructions, see link, for the Draw-Tite Trailer Hitch, # 75713, indicate that no trimming is needed for installation of the hitch on the 2011 Dodge Durango. There is a note that states that there may be some excess body sealer, caulk, that may need to be trimmed so the hitch will sit flush under the vehicle. Some items you may need to complete your towing setup are listed below. etrailer.com Ball Mount Kit, # 989899 Trailer Wiring Harness, # 118552
view full answer... - Recommended Hitch for a 2022 Honda PilotI would be happy to help. The hitch that I recommend for your 2022 Honda Pilot is the etrailer Trailer Hitch Receiver # e98840. This hitch is made in the USA, has a bolt-on, no-drill installation and a nice matte black finish. This hitch will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you plan to do any towing, you can pick up the T-One Vehicle Wiring Harness # 118760 and the...
view full answer... - Can the Fuel Tank Be Removed from 2001 Jeep TJ With Curt Trailer Hitch Receiver 13408 InstalledFrom what I have found, there are four bolts holding the fuel tank in place at the back of your 2001 Jeep TJ. The Curt Trailer Hitch Receiver # 13408 covers these bolts once it is installed, so it would have to be uninstalled in order to access them and remove your fuel tank. I recommend the Curt Trailer Hitch Receiver # 13430 instead. This hitch sits slightly further back, leaving those bolts accessible. There should be plenty of clearance to remove the fuel tank, although it may make...
view full answer...
- What is the Correct Hitch Pin Size for a 16 Foot TrailerThe hitch pin you need is going to depend on which size receiver you have on your hitch. More than likely you have a 2" receiver, which means you want a 5/8" diameter hitch pin like the Curt Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span # C21510. Just to be clear, the cotter pin is the smaller pin that comes with the hitch pin in order to secure it. If you're looking for a ball mount and have a 2" receiver, I recommend the etrailer Ball Mount Kit - 3/4" Rise or...
view full answer... - Recommended Hitch for a 2022 Subaru OutbackThe hitch that I recommend for your 2022 Subaru Outback is the Curt Trailer Hitch Receiver # C67JR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you plan to do any towing, you can pick up the T-One Vehicle Wiring Harness # 118467 and etrailer Ball Mount Kit # 989899 to round out a tow package.
view full answer... - Does Trailer Hitch Capacity Allow Towing More Weight Than 2008 jeep Compass 4 X 4 CapacityWhen towing with your 2008 Jeep Compass 4 X 4, you will never want to exceed the towing weight capacity of the vehicle listed by the manufacturer. from the information I was able to find, if you have the towing package, your vehicle can tow up to 2,000 lbs with a tongue weight of 225 lbs. If you do not have the towing package I found the towing capacity is 1,000 lbs and has a tongue weight capaity of 150 lbs. Hitches are made with the towing capacity and tongue weight capacity that many...
view full answer... - Recommended Trailer Hitch for 2021 Acura RDXFor your 2021 Acura RDX I recommend the Curt Trailer Hitch Receiver # C95CR. This Class III hitch has a 2" receiver and is assembled in the USA. I like this one over the other available options because we have found the gloss black powder coat finish on the Curt to be a bit thicker and hold up better. If you plan on doing some towing, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118800. This wiring harness plugs into existing wiring so you...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Mike S
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Henry
5/7/2021
The hitch is holding up great! Very pleased with the product.