Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K

Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K

Item # 40330

lowest price pledge

Retail:$57.77

Our Price: $43.44

You Save: 25%
Ball Mounts

Orders above $99 qualify for Free Shipping

Shipping Weight: 13 lbs

Quantity: 
In Stock
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K Steel Shank 40330
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Class IV
  • 16000 lbs GTW
  • Drop - 2 Inch
  • Rise - 1 Inch
  • Draw-Tite
  • No Ball
  • Steel Shank
Sturdy steel ball mount with solid, 1-piece shank measures 8-1/2" from center of hitch pin hole to center of ball hole. Angle-cut shank slides easily into your hitch. Powder coat finish over a-coat base provides excellent rust protection. Call 800-298-8924 to order Draw-Tite ball mounts part number 40330 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K. Ball Mounts reviews from real customers.


  • All Info
  • Reviews (113)
  • Q & A (48)
  • Videos (2)
  • Photos
  • Why etrailer?

Draw-Tite Ball Mounts - 40330

Sturdy steel ball mount with solid, 1-piece shank measures 8-1/2" from center of hitch pin hole to center of ball hole. Angle-cut shank slides easily into your hitch. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball
  • Angle-cut end on shank allows for easy installation and removal
  • Both drop and rise positions available to ensure level towing
  • Solid, 1-piece forged steel construction
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip or hitch lock sold separately


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight: 16,000 lbs
  • Tongue weight: 2,400 lbs
  • Length: 8-1/2" from center of hitch pin hole to center of ball hole
  • Rise: 1" from top of inside of hitch opening
  • Drop: 2" from top of inside of hitch opening
  • Ball hole diameter: 1-1/4"
  • Ball platform dimensions: 1" thick x 3" wide
    • Requires ball shank that is at least 2-1/4" long
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


40330 Draw-Tite Solid Forged Ball Mount - 1" Rise - 2" Drop - 16,000 lbs

Reese 21330, Hidden Hitch 80142






California residents: click here


Video of Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Draw-Tite Ball Mounts - Fixed Ball Mount - 40330 Review

Today we are reviewing part number 40330 from Draw Tite. This is a forged one piece ball mount with a one inch rise or a two inch drop. The towing capacity is 16,000 pounds and the towing rate capacity is up to 2,400 pounds. As you can see it has a drop of two inches from the top of the shank to the ball mount platform and it has a rise of one inch from the top of the shank to the ball mount platform. It measures from the center of the hitch pin-hole which is here to the center of the ball hole-which is here and that is eight and one half inches. The ball mount platform itself is one inch tall.

It has a double powder coat finish so it should resist corosion and rust very nicely. That's it for part number 40330 from Draw Tite-the forged ball mount with a one inch rise or a two inch drop rated at 16,000 pounds.


Customer Reviews

Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K - 40330

Average Customer Rating:  4.8 out of 5 stars   (113 Customer Reviews)

Sturdy steel ball mount with solid, 1-piece shank measures 8-1/2" from center of hitch pin hole to center of ball hole. Angle-cut shank slides easily into your hitch. Powder coat finish over a-coat base provides excellent rust protection.

- 40330
by:

I had no idea a regular old slide receiver ball mount wouldn't work for for my trailer. It turns out that my old reese ball mount from Wal-Mart was underrated and thus cracked within 2" of the ball. Thanks etrailer for making hitch grade easy to understand and potentially saving me and my family's life. 292874



- 40330
by:

Hitch looks good. One issue that I think may be something to think about. The hitch that I ordered is rated @ 16,000. There is no where on the hitch that the weight is stamped. This could be problematic when I get inspected by the DOT and have to try and convenience them that the hitch is rated for the 14,000 # trailer that it is connected to. 10329



- 40330
by:

solid bar working great 714575



- 40330
by:

WOW! I wanted to purchase a really strong ball mount and this one exceeds my expectations! I also purchased in my order the folding wheel chocks which were made of metal. My plan is to mount those permanently on my car hauler trailer so that when I put the car on, I just drive up against these chocks. This makes loading my car super easy. I really like doing business with etrailer because every order I’ve ever placed his arrived quickly and been with products that are excellent quality. 711219



- 40330
by:

A great product , from a great company! I will be telling many people I know about this site and staff interaction!...( my box arrived when they said it would !...it was on time, but the box was a little beat up, and the hardware was missing out of it,...I called, and the service department was happy to send a replacement!...thank you!) 682061



- 40330
by:

Great heavy duty hitch! 624252



- 40330
by:

Great product, fast delivery, great sta ff. 608367



- 40330
by:

Solid one piece of steel and coated. No welding. Also can use it as a high hitch or low hitch with approx 3 inch difference. Works great for my trailer rv 563264



- 40330
by:

Exactly what I ordered and quick delive ry. 547259



- 40330
by:

Bought one of the same ball mounts for another vehicle. Didn't see a reason to change what was working. The only change I made was flipping it over and using it as a 1" rise instead of a 2" drop mount. 528065



- 40330
by:

Will work great for my truck 523058



- 40330
by:

What a beast! Built like a tank and I can probably tow one with this bar. Solid construction. Very impressed 480244



- 40330
by:

This ball mount is not your typical square stock, it is a solid piece of steel and heavy! I am using it with a class 4 Curt hitch. It fits well into receiver and ball mount nicely without excessive play. 474890



- 40330
by:

As described. 467230



- 40330
by:

I use this when pulling heavy fertilizer spreaders behind my truck. It is not unusual to have 8000lbs on a spreader. My Coop manager says it it sht heaviest hitch he has ever seen around here. 452308



- 40330
by:

Needed a stronger ball mount for pulling my stock trailer. This one is perfect. The original I had dropped too much as well. But, be careful, this is one heavy chunk of forged steel. 442170


Comments

Everything is working magnificently. Thank you for checking up with me.

Matthew W - 10/13/2018

44581

- 40330
by:

Good product only thing I would change is top and bottom surface area where ball goes should be machined parallel to make a good surface to keep ball tight I machined mine before installing it. Im sure that it would have worked with out doing this but might of worked lose over time. 441912



- 40330
by:

Just what I ordered, excellent quality. 435662


Comments

Working great and no issues

Jim A - 09/24/2018

43928

- 40330
by:

Products were good quality. Ordered showed in stock was built in China and took 4 weeks for deliver. This is not what etrailers website indicated. Unhappy with customer service 434533



- 40330
by:

Caught this item on sale for less than $30.00. Great price for a solid steel ball mount. 417148



- 40330
by:

Made a very nice gift to my brother's family with a new horse. And I supply the truck for now. 411200



- 40330
by:

Quality products, great price and quick delivery, thks 405850



- 40330
by:

Awesome customer service! They upgraded my shipping for free so I got my hitch sooner than expected. This was the most affordable place I could find this either locally or on the internet. Will be using etrailer nextime I have any trailer needs at all. 396985



- 40330
by:

It is exactly what I needed for towing my new trailer. I have looked for it everywhere. I need the higher weight rating for my pressure washing trailer. 379384



- 40330
by:

super strong, solid bar which has now worn out at all. we had the tubing one and it only lasted a year but this is not showing any wear. 357555



- 40330
by:

Good service ,regular customer retrune customer 326188



- 40330
by:

Great products at an excellent price. 322629



- 40330
by:

New class 4 ball hitch for my new Tacoma. Good fit. Seems indestructible. 319793



- 40330
by:

very well made. 315713



- 40330
by:

This hitch mount is a beast! It's a little heavy but its solid metal and feels indestructible! I'm very happy with it and the peace of mind that it will not fail is great. Highly recommend it. 302104



- 40330
by:

Great product! 268451



- 40330
by:

Prompt shipping. I installed the product in 10 minutes and fit perfectly. 266448



- 40330
by:

Easy ordering, fast order processing, & quick delivery - - - what more could I ask for. 264671



- 40330
by:

This product couldn't possibly be made any better !!!!!!!!!! 250257



- 40330
by:

This hitch is a beast! That's all... 248611



- 40330
by:

Extra heavy duty. Great product 246862



- 40330
by:

Great product, great price and fast shi pping! 244315


Comments

Product is excellent. Was purchased for my son to haul his heavy mud truck and trailer. The solid ball mount is heavy duty not hollow like at the parts stores.

Paul H - 04/14/2017

23160

- 40330
by:

Well built product, very heavy. Fast de livery. 241900



- 40330
by:

Great hitch and ball. 233125



- 40330
by:

I needed a 2 inch drop for my tandem axle trailer to ride correctly but I could not find a ball mount locally to fit my application. An etrailer customer service team member pulled this item from their warehouse, took a couple measurements over the phone to assure me of a correct fit, and shipped it that afternoon. I pulled the trailer last weekend and this solid ball mount from Draw-Tite did the trick. If you have a question, just call 'em. Thanks etrailer! 232442



- 40330
by:

Exactly what I needed - a super heavy duty receiver ball holder! Arrived quickly and very well packaged. But I wouldn't expect less from e-Trailer - they are very good at providing an excellent product and great customer service. 231295



- 40330
by:

This thing is solid. Have not towed with it yet but since its rated at 16k lbs and my truck is only rated to 7k lbs its more than enough but I never like to run the limits on anything. There area lot more stresses that get put on these things when you have to panic brake for example. Only gave it 4 stars cause it is made in china. I really want American made but that's hard to find. 231169



- 40330
by:

The forged ball mount is exactly what I wanted, very heavy duty. I also bought a hitch ball and trailer hitch receiver lock. Thank you etrailer for great products at a great price and very fast shipping!!! 226948



- 40330
by:

Great product. Delivered quick no hassle. Would buy again. 222102


Comments

Still working great!

Brett - 08/31/2016

20706

- 40330
by:

Got this in today, man is it heavy duty. Looks great and will hold up for a long time to come. Thanks for the quick delivery. 221837



- 40330
by:

I've made about 5 purchases from etrailer over the past couple of years , and their prices have been excellent . No company which I have ever dealt with , matches their fast service. Etrailer puts most companies to shame , when it comes to speedy , friendly service. If they have what I want , they'll always have my business. 221199



- 40330
by:

This item is really stout, and will give peace of mind when towing my 10,000 pound boat and trailer. 220492


Comments

I appreciate that you take the time to follow up on past reviews and commend you for your interest in doing so. I can report that I am still completely satisfied with the products and the service from etrailer.com.

Mike A - 08/23/2016

20525

- 40330
by:

To be honest I just like the solid forged feel better than square tubing. I feel as though it will last longer and I can tow anything I want! :) 215183



- 40330
by:

Sold. Black. 16K. 1" rise 2" drop. Not sure what else to put, if you need something this heavy duty, then it works. If you only need a 6K hitch, it'll work for that too. 16K bumper pull is insane. My total truck and trailer is 13800, so better to have excess capacity than be near or over. 213900



- 40330
by:

Great product great service very happy 213277


50
114
Show More Reviews

Ask the Experts about this Draw-Tite Ball Mounts

Do you have a question about this Ball Mount?


  • Recommended Class V Hitch for 2006 GMC Sierra for Towing 10,800 lb Boat
  • I'd recommend upgrading that hitch, ASAP. If the hitch fails while you're towing, causing an accident, your insurance company would be well within their rights to deny you coverage which would leave you wide open to all kinds of legal liability. Not a pretty situation. Usually, Class V hitches do indeed have a 2-1/2 inch receiver tube. However, companies like Curt Manufacturing, Draw-Tite and B&W have developed Class V hitches with a 2 inch receiver tube that are strong enough to be...
    view full answer...

  • How Does B&W Trailer Hitch Mount to a 1975 Chevy 1-Ton Dually Pickup Truck
  • On B&W trailer hitch # BWHDRH25122 the mounting brackets are oriented the same for all applications. The tabs point in but attach to the bottoms of the frame rails. The customer submitting photo appears to have some other component installed. The upper brackets in that picture are not part of the hitch assembly. They appear to be bumper brackets. Once installed the receiver should be right under the bottom of the bumper of very close especially since you have a stock bumper on your 1975...
    view full answer...

  • Availability of 2 Inch Ball Mount With a Rise Between 3/4 Inch and 1-1/4 Inch
  • The least amount of rise for a 2 inch ball mount would be 3/4 inch, like the Draw-Tite Ball Mount, part # 2923. This is one of the most popular ball mounts. The next size up would be a 1 inch rise, like the Draw-Tite Ball Mount, part # 40330. I am including links to product pages that will list the ball mounts with a 3/4 inch rise and with a 1 inch rise. You will want to make sure the gross towing weight capacity and the tongue weight capacity of the ball mount you choose should match...
    view full answer...

  • Recommended Class V Trailer Hitch for 2007 Chevrolet Silverado 2500 HD Classic Body
  • I spoke to my contact at Curt about your 2007 Chevrolet Silverado 2500 HD Classic. They told me the Curt Class V hitch, part # C15312 is designed to fit your truck if it has the factory cutout bumper. They told me that the cutout is the recessed area on the bumper where the license plate typically goes. this hitch has a 2 inch receiver opening. This hitch should sit right below the bumper and would be just what you are looking for. If you need a ball mount for the hitch I recommend...
    view full answer...

  • Ball Mount Recommendation Rated for 14,000 Pounds Gross Trailer Weight on a Ford F-450
  • To determine the receiver size you have, I have included a link to an FAQ that will help. The Reese 2-1/2 inch Titan ball mounts like # RP45323 or the one found in # EBMK25318, tend not to fit the factory 2-1/2 inch receivers on Ford Super Duty trucks. You will need to use one of the Convert-A-Ball ball mounts. We have # AMSCV-6 with a 6 inch drop or 4-3/4 inch rise. We also have # AMSCV-4 with a 4 inch drop or 2-3/4 inch rise. And then we have # AMSCV-2 with a 2 inch drop or 3/4...
    view full answer...

  • Is a Ball Mount Spacer Available for a Hitch Ball with a 1 Inch Diameter Shank
  • To use the Curt 2 Inch Trailer Ball, # 40038, with the Draw-Tite Forged Ball Mount, # 40330, you will want to use the Reese Hitch Ball Bushing, # 58184. This will not reduce the towing or tongue weight capacity of the hitch ball or the ball mount, but you will be limited to the 12,000 lb towing capacity of the hitch ball since it is the lowest rated component.
    view full answer...

  • Ball Mount and Weight Distribution Recommendation for 8500 lb Travel Trailer
  • The hollow shank ball mounts typically carry a lower weight rating than what you are looking for. You do not mention what kind of rise/drop you are needing, but for a 12,000 pound rating I would recommend a forged ball mount. Part # 40330 offers a 1 inch rise or 2 inch drop, part # 40331 has a 3 inch rise or 4 inch drop, and part # 40332 features a 5 inch rise or a 6 inch drop. Anytime the loaded trailer weighs 50 percent or more than the weight of the vehicle, weight distribution is...
    view full answer...

  • 50 mm Hitch Ball Recommendation for a 2 inch Trailer Hitch
  • The only 50 mm hitch ball we offer is the part # 63912 with a 3/4 inch diameter shank that would only fit 1-1/4 inch ball mounts, but a 2 inch hitch ball translates to 50.8 mm. Which is very close. Since you have a 2 inch hitch your best option would be a 2 inch hitch ball like the part # A-90 and a ball mount like the # 40330 for if you need a 1 inch rise or 2 inch drop. If you need a different rise/drop you would want to check out the help article I attached on how to pick out the...
    view full answer...

  • Which Trailer Hitches Will fit a 2002 Ford E150 Econoline Van
  • There are several hitches available for your 2002 E-150 Econoline Van. I have posted a link below of all of the hitches available. I would recommend the Draw-Tite Trailer Hitch for the 2002 Ford Van, item # 75703. This hitch is economically priced and can tow up to 6,000 pounds or 10,000 pounds with a proper weight distribution system, if your van has sufficient towing capacity. If you need a hitch with more capacity the Curt Class IV Trailer Hitch, item # 14055, will install on your...
    view full answer...

  • Trailer Hitch for 2009 Ford E-150 Van
  • When Draw-Tite hitch # 75703 is installed on your 2009 Ford E-150 van you WILL be able to re-install your spare tire. Removing the spare for hitch installation simply makes it easier to get to the attachment points on the vehicle frame. When you re-install the spare you might only need to shift it's position slightly but it will go back on just fine. I have linked the written instructions, an install video and a helpful article to assist you with your install. The only special tool needed...
    view full answer...

  • 16K Rated Ball Mount Made in the USA for 2 Inch Trailer Hitches
  • Forged Ball Mount # 40330 is made in China but B&W ball mount # BWBMHD30010 is made in the USA. This one is 8-1/2 inches long but there is a longer one, # BWBMHD30011, which is 10-1/4 inches long.
    view full answer...

  • Replacement Hitch Ball to Increase Ball Height
  • It is always important to keep your trailer level when hitched to your tow vehicle and the two simplest ways to accomplish this are either a high-rise hitch ball such as the two you reviewed, parts # C40033 and # C40034, or a ball mount with the amount of rise you need. Either option will work. The hitch balls you referenced are shown in the linked photo; I have added the dimension above the mounting surface for each ball. If you have a 2-inch hitch receiver and want to use your existing...
    view full answer...

  • Trailer Hitch Recommendation for a 1994 Ford F-250
  • When measuring the frame width on a vehicle, you will need to measure from the outside of one frame rail to the outside of the other frame rail. It sound like you have the 37-1/4 inch frame on your 1994 Ford F-250. Usually, you see the more narrow frame on cab and chassis models. The CURT Trailer Hitch, # C15300, does not fit vehicles with a 34 inch frame but will fit the 37-1/4 inch frame. I have included a link to the installation instructions for you. It is possible that the holes...
    view full answer...

  • Will Curt Trailer Hitch # C15300 Fit a 1997 Ford F-350 Without Removing the Spare Tire
  • According to Curt, if you install trailer hitch # C15300 on your 1997 Ford F-350, the spare tire will need to be temporarily lowered for hitch installation, but it does not have to be removed. The hitch is designed to fit the larger 37-1/4 inch frames. While you do not have to remove the spare tire, it may need to be repositioned once the hitch is in place. I have included a link to the installation details for reference. The recommended ball mount for this hitch is # 40330 and you can...
    view full answer...

  • Can Curt Forged Ball Mount Be Flipped For More Height When Towing Car Trailer
  • I called my contact at Curt and they told me that you can use the Curt Heavy Duty Forged Ball Mount, part # C45331 flipped over if you wish but you will probably have a heck of a time removing the ball. They said the ball is machine-torqued at 450 ft-lbs when it is attached to the drawbar. An option that may be easier on you would be to use a different ball mount and ball. The ball mount I recommend is part # 40330. This ball mount has a 1 inch rise or 2 inch drop and a weight capacity...
    view full answer...

  • Recommend The Highest Capacity Hitch For 2000 Dodge Full Size Van w/ Factory Step Bumper
  • I would recommend the Draw-Tite Trailer Hitch, part # 41533, which is a Class III hitch and is the highest capacity hitch available for your 2000 Dodge Full-Size Van. This hitch will fit not models with the factory step bumper. To complete your towing setup, you will need the following: Draw-Tite Ball Mount, part # 40330 2-5/16 Tow Ball, part # 19286 Pin and Clip, part # PC3 Wiring, part # 118368 In addition, if you will be pulling a trailer that weighs 50 percent or more of the...
    view full answer...

  • Square Corner Ball Mounts Will Not Fit in Factory Trailer Hitch to 1993 Ford F-250 Diesel
  • What you are describing is a common problem with some factory hitches. You are correct, you do not want to grind away any of the metal of a ball mount to get it to fit. Removing some of the powder coat is acceptable provided you do not also remove any metal. What I recommend is looking for a ball mount with the more rounded corners. A ball mount like # BM20 has more rounded corners but it is rated for 10,000 pounds whereas the mount you referenced is rated for 16K. Cushioned ball...
    view full answer...

  • 2-5/16 Hi-Rise Ball Options For Additional Height
  • We have 2 high rise hitch balls that have the 2-5/16 inch diameter, and they both have the 1-1/4 inch shank. We have the 2 inch rise # C40034 and the 1 inch rise # C40033. There is not a 2-5/16 inch hitch ball that has a 1 inch shank. If you want a ball mount that will work with this, I recommend the Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K # 40330.
    view full answer...

  • Class V Trailer Hitch Recommendation for a 2000 Dodge Ram 1500 with 8 Foot Bed
  • According to CURT, trailer hitch # C15300, will fit the following Dodge vehicles: 1967 - 1980 Dodge Full Size Pickup Pickup, with Standard or Step Bumper 1981 - 1993 Dodge Ram Pickup Pickup, with Standard or Step Bumper 1994 - 2001 Dodge Ram Pickup Pickup, 6 or 8 Foot Bed with Standard or Step Bumper 2002 - 2002 Dodge Ram Pickup 2500 and 3500 Series with 6 Foot Bed or 8 foot bed The recommended ball mount is # 40330, and you can use hitch pin and clip # PC3. For a ball, use # A-90...
    view full answer...

  • Compatibility of Curt Class IV with Spare Tire of 2013 Ram 1500 ST
  • The rearmost frame cross member or bumper beam of your Ram is essentially the OEM hitch minus the receiver opening. The OEM hitch can be completed so to speak using the Curt # 13333 which would provide a capacity of 6,000 lb gross towing/ 600 lb tongue weight. In order to achieve a higher tongue weight capacity (10,000 GTW/1,00TW), you would need to use the Curt Class IV # 14374 that uses the frame members for its two forward-most attachment points and the bumper beam for its rear...
    view full answer...

  • Installation of the Draw-Tite Class III Trailer Hitch On a 1989 Dodge B1500 Van
  • We do not have an installation facility in Connecticut. We do offer detailed instructions on how to correctly install the # 75140 hitch on the 1989 Dodge B1500 Van. This hitch installation is very easy and does not require drilling or welding, if you have basic mechanical skills you could install the hitch yourself. Be aware that the hitch isn't compatible with step bumpers-only the stock bumper. If you decide to purchase the hitch, you will also need a drawbar, item # 40330, pin and...
    view full answer...

  • Class IV ball Mount and Ball Recommendations for a 2 Inch Trailer Hitch Receiver
  • We have numerous ball mount styles and capacities that fit in a 2 inch trailer hitch, see link. For a Class IV with 16,000 pound capacity, the most popular options is # 40330 if you are looking for a standard fix ball mount. For a ball you can use # A-90 for a 2 inch or # 19286 for a 2-5/16 inch. If you are looking for a pintle hook combo, you could use # TR63041. The ball capacity on this one is 7,000 pounds and the pintle capacity is 12,000 pounds. For the same set up but with a 2-5/16...
    view full answer...

  • Will Draw-Tite Trailer Hitch # 41906 Fit Around the Spare Tire on a 2008 Ford E-350 Van
  • The Draw-Tite Trailer Hitch, # 41906, is designed to fit around the factory spare tire on your 2008 Ford E-350 Van. So you will not have to remove the spare tire in order to install this hitch. It may be beneficial to temporarily remove it to make installation easier. I have included a link to the installation instructions and a link to a video showing a typical installation for you to view. If you plan to do some towing the recommended ball mount is # 40330, and you can use pin and...
    view full answer...

  • Will Draw-Tite Trailer Hitch 41945 Clear the Rear Bumper on a 2011 Ford E-250 Van
  • We have not had the chance to install trailer hitch # 41945 on a vehicle so we do not have a video or pictures. But there is a diagram in the isntructions, linked for you, that shows the hitch installed in the proper position. The pin hole is nearly flush with the rear bumper. If you plan on doing some towing, the most popular ball mount for this hitch is # 40330 and you can use pin and clip # PC3. For a 2 inch ball use # A-90 and for a 2-5/16 inch ball use # 19286. For trailer wiring...
    view full answer...

  • Will Curt Trailer Hitch # 14055 Fit Around the Spare Tire on a 2010 Ford Full Size Van
  • I spoke with my contact at Curt regarding trailer hitch # 14055 for your 2010 Ford Full Size Van. She stated that it will fit around the spare tire when installed. I have included a link to the installation details below as well as a video showing installation on a similar vehicle. If you plan on doing some towing, the recommended ball mount is # 40330 and hitch ball # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). For trailer wiring, use # 118551, or if you have the factory...
    view full answer...

  • Which Ball Mount for a 2007 Chevy Silverado Z-71
  • Typically a 2 inch drop is the most common for a Silverado. I have added links below to our ball mounts and a ball mount help page.
    view full answer...

  • Will Curt Trailer Hitch # 14053 Fit a 1997 Ford E-Series Van with a Factory Step Bumper
  • The Curt trailer hitch # 14053 will fit on your 1997 Ford Clubwagon with the factory step bumper. The spare tire will need to be temporarily removed to install the hitch and then put back in place, or further forward if needed, after installation. I have included a link to the installation instructions for you. Because your van has a step bumper, you may need a longer ball mount. To determine if a longer ball mount is needed, with the hitch installed measure from the center of the hitch...
    view full answer...

  • Draw-Tite Hitch # 75140 Recommendation for a 1987 Dodge Van B 250 Sportsman
  • Yes, this Draw-Tite Ultra Frame Trailer Hitch Receiver # 75140 that you referenced would work on your 1987 Dodge B 250 Sportsman Van. I attached installation instructions for you to check out if you like also. You may be interested in the following products to complete your towing setup: 4-Pole Hardwire Kit Including Circuit Tester # 18252 Forged Ball Mount # 40330 Hitch Ball # 19286 Hitch Ball # A-90 Pin and Clip # PC3
    view full answer...

  • Ball Mount Reducer Bushing for a Forged Ball Mount with 1 Inch Thick Ball Platform
  • Yes, you will need reducer bushing # RP80106. It was designed for forged ball mounts that are 1 inch thick like # 40330. Using this bushing will allow you to use a ball with a 1 inch diameter shank.
    view full answer...

  • Ball Mount Recommendation for Draw Tite Hitch for 2007 Toyota Tundra
  • It sounds like maybe you are looking for just a ball mount to go along with a hitch that you have installed on your 2007 Toyota Tundra. The recommended ball mount to go along with the hitches that are sold for the 2007 Toyota Tundra is the Draw Tite part # 40330. This ball mount can do a rise of 1 inch and a drop of 2 inches. The best way to pick out a ball mount is to first determine how much rise or drop you would need to tow your trailer level. To see how this would be done check...
    view full answer...


Do you have a question about this Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Brian T
Video by:
Dustin K
Video Edited:
Chris R
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.