Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs

Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs

Item # C45562

lowest price pledge

Retail:$45.94

Our Price: $25.69

You Save: 44%
Ball Mounts

Orders above $50 qualify for Free Shipping

Shipping Weight: 7 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock
Curt Fixed Ball Mount - C45562
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos

Unique, 9-3/4" long ball mount features a permanently mounted, chrome-plated, 2" diameter hitch ball on a strong, corrosion-resistant, curved shank. Ball mount can be used in the rise position only. Fits 1-1/4" hitches. Call 800-298-8924 to order Curt ball mounts part number C45562 or order online at etrailer.com. Free expert support on all Curt products. Guaranteed Lowest Price and Fastest Shipping for Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs. Ball Mounts reviews from real customers.
  • All Info
  • Reviews (38)
  • Q & A (22)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Ball Mounts - C45562

  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Class II
  • 3500 lbs GTW
  • Drop - None
  • Rise - 3 Inch
  • Curt
  • One Ball
  • Steel Shank
  • Steel Ball

Unique, 9-3/4" long ball mount features a permanently mounted, chrome-plated, 2" diameter hitch ball on a strong, corrosion-resistant, curved shank. Ball mount can be used in the rise position only. Fits 1-1/4" hitches.


Features:

  • European-style ball mount features permanently attached hitch ball
  • Sturdy, steel construction
  • Corrosion-resistant design
    • Chrome-plated ball
    • Durable, carbide black powder coat finish on ball mount
  • High-quality manufacturing process
    • CNC machined for strong, consistent cuts and welds
    • 7-Stage washing method ensures smooth, clean surface
  • Drawbar can be used in rise position only
  • Hitch pin and clip or hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 350 lbs
  • Ball size: 2"
  • Length: 9-3/4" from center of hitch pin hole to center of ball
  • Rise:
    • 3-1/8" from top of inside of hitch opening to start of vertical curve
    • 6-1/2" from top of inside of hitch opening to top of ball


45562 Curt Euro Mount - 1-1/4" - Class II







Video of Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Ball Mounts - Fixed Ball Mount - C45562 Review

Today we'll be reviewing part number C45562. This is the Curt Class II Euro Style Drawbar with a 2" Ball, 3-1/8" Rise, and it's rated at 3,500 lbs. Now this is designed to fit your 1-1/4" x 1-1/4" trailer hitch receiver. The European-style ball mount features a permanently attached hitch ball, has a nice sturdy steel construction, and it also has a corrosion-resistant design with a chrome-plated ball, and the durable, carbide black powder coat finish on the ball mount itself. You can see that this is a nice solid piece. The only hollow-point is where your hitch pin would go. How it works, is you would slide this into the receiver tube of your hitch, line up your pin hole, and then you'd install your 1/2" pin and clip, or hitch pin and lock. Those items are sold separately and can be found on our website on this products product page, under related items. It also has a high-quality manufacturing process.

It's CNC machined for strong, consistent cuts and welds, and it also goes through a 7-stage washing method that ensures smooth, clean, surfacing. The drawbar can only be used in the rise position, so keep that in mind. This has a gross towing weight of 3,500 lbs, and a maximum tongue weight of 350 lbs, and again, this does have a 2" ball. The measurement from the center of the hitch pin hole, to the center of our ball, is going to measure 9-3/4", and this has a 3-1/8" rise. That measurement comes from the top of the inside hitch opening, to the start of the vertical curve. To get an accurate measurement of that, we'll place one ruler here, then we'll take our other one and go across at the top of the vertical curve. It lands at the 3-1/8" mark on our wooden ruler. That's going to complete today's review of part number C45562.

That's the Curt Class II Euro Style Drawbar with a 2" hitch ball. .


Customer Reviews

Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs - C45562

Average Customer Rating:  4.8 out of 5 stars   (38 Customer Reviews)

Unique, 9-3/4" long ball mount features a permanently mounted, chrome-plated, 2" diameter hitch ball on a strong, corrosion-resistant, curved shank. Ball mount can be used in the rise position only. Fits 1-1/4" hitches.

- C45562
by:

Unique design and great looks along with unmatched strength make this the drawbar and ball combo of the truly discriminant driver 15096



- C45562
by:

Looks heavy duty. Great price and even better customer service. It shipped fast and I received it acday sooner than I was told. This was my 2nd order with etrailer.com and it won’t be my last. 569845



- C45562
by:

I am completely satisfied with the product. Great quality and excellent finish. Prompt shipping and excellent customer service. It is stylish and functional and will meet my needs for towing up to 3,500 pounds. I would definitely do business with this company again!!! 337595



- C45562
by:

Great product, fits trailer nicely, heavy duty, and very well packed. I purchased the Hitch from Carid, and it was shipped straight from Curt Mfg. The hitch busted holes in the box from floating around (no packaging materials inside), when I bought this 2" ball from etrailer it came in a etrailer box and was surrounded by brown paper to where the ball/bar didn't shift in the box. 183477


Comments

Still works great! Curt makes some good products, no issue with the light wiring, ball, or hitch receiver.

Daniel - 04/05/2016

17373

- C45562
by:

Product is perfectly as described. I will just have to get a bit higher rise. Also the chrome plating peeled off ball within a 2 mile drive. So product durability will possibly be an issue. It is just a trailer ball but the plating should not be peeling off this soon. 728535



- C45562
by:

The hitch shop wanted $400.00 to get and install the receiver. I ordered the part from you with ease from the website. When it arrived I installed it in less than 30 minutes. I watched the short video on the website and it went right in. All the holes lined up perfectly. The only problem I had was my sockets rolling down the driveway. Great product easy install and great instructions. 714737



- C45562
by:

The mount has held up. I've been babying mine so no rust and barely any scrapes on it. It's helped me in a few pinches. Overall very satisfied. The real star is Natalie. I remember her from when I bought the thing. That's excellent example of customer follow through. Good on ya. 698626



- C45562
by:

Works like a charm! 636894



- C45562
by:

Really helps bring the trailer ball up to a reasonable height on my 2013 VW Jetta TDI sedan. 616030



- C45562
by:

Strong and good 599953



- C45562
by:

Works well, perfect height for the MK7 Golf Sportwagen for a standard trailer neck. 576770



- C45562
by:

Love the look of this European hitch. Solid steel not hollow. 561872



- C45562
by:

Works great on my Chevy Bolt. 489398



- C45562
by:

Works as it should 472772



- C45562
by:

I was told by the sales rep that this hitch would give 3.25" of rise. When I received it I could tell it was too high so I measured it. It's 5.125" from the bottom of the ball to the top of the square shank, and 6.5" from the top of the ball to the top of the square shank. And it's even printed right on the sticker 5 1/8" rise. 465996



- C45562
by:

It looks good, and like quality. I expect it to work just fine. 460762



- C45562
by:

Heavy duty, looks great on my outback 441960



- C45562
by:

Excellent! Customer service was great too!! I'm using this to haul a pop up camper with my Subaru Outback. A regular hitch makes the connection too close to the bumper. This is perfect!! 385677



- C45562
by:

Well made compact and user friendly 372026



- C45562
by:

Timely deliver of product that fit my needs and looks good too. 362983



- C45562
by:

This hitch has worked perfectly on my Subaru for over a year now. Last summer I pulled my tear drop trailer around the country with no problems and the finish on the hitch still looks like new. I would recommend this hitch to a friend. 336235



- C45562
by:

works great, great price 306061



- C45562
by:

Drawbar works as advertised. FWIW, the TOP of the ball to the TOP of the drawbar is 6-5/8". If the ball was round on top (it is flat, as can be seen in the pictures), the distance would be more like 6-3/4". This should make it easier to detemine if this is the hitch for your needs. I had trouble finding this info on the web. 234409



- C45562
by:

Good looking tow hitch - well made and powder-coated. I used the same one in 1-7/8" for a number of years and it is still holding up very well. 187234



- C45562
by:

good quality. 170738



- C45562
by:

Excellent customer service!!! 161018



- C45562
by:

The product is well built and arrived on time. 148961



- C45562
by:

This item was accurately described, and EXACTLY what I needed to complete my trailering needs. Another pleasant etrailer transaction. 136683



- C45562
by:

Nice Clean look. 129083



- C45562
by:

Looks stout! 100154



- C45562
by:

Seems to work like it is supposed to. I bought this for my wife's SUV, picking this style just to offset the look apart from the usual. Based on my trailer tongue height, I would have liked a bit more rise, say 5" total, but everything seems to load and unload easy enough. 90368



- C45562
by:

Nice, sexy ball! Wish they have a 1 7/8" ball like this also 60042



- C45562
by:

Product was as described 58713



- C45562
by:

I love this company,They have everything I need and very good service. This euro mount ball is excellent.. built very strong.. 54870



- C45562
by:

Great product, worked beautifully and shipped extremely fast made it in great time for the weekend camping trip. 50917



- C45562
by:

Made quite well. Heavy Duty Materials. 31064



- C45562
by:

Great! 16028



- C45562
by:

Not as versatile as a traditional hitch mount and ball, but much neater if it happens to fit your needs. This fits my Subaru Outback perfectly and places the ball at the ideal height for my trailer. One piece means one less thing to fail. 10521


41
41

Ask the Experts about this Curt Ball Mounts

Do you have a question about this Ball Mount?


  • How to Select the Correct Rise or Drop for a Euro Style Drawbar on 2017 Subaru Outback
  • Thank you for the dimensions; you correctly measured from the ground to the top of the hitch on your 2017 Subaru Outback, though the other measurement is from the ground to the bottom of the coupler. Assuming your coupler is roughly 2 inches tall, from the ground to the bottom of the coupler would be approximately 18 inches. Since the top of your hitch is 15 inches, you need a drawbar that gives you about 3 inches of rise. For Euro Style drawbars rise is measured to the beginning of...
    view full answer...

  • How to Tow a Trailer with a 2017 Ford Fusion SE
  • In order to tow a trailer with your 2017 Ford Fusion, you are going to need a trailer hitch, wiring harness, and ball mount/hitch ball. For a trailer hitch, I recommend the Curt Trailer Hitch Receiver part # C12091 which has a Class II rating with a 1-1/4" receiver tube opening. This hitch is a direct fit for your Fusion and will not require any drilling. It is also very easy to install as you can see in the attached video. Then for a wiring harness, I recommend the T-One Vehicle Wiring...
    view full answer...

  • Will Euro-Style Ball Mount fit Draw-Tite Trailer Hitch on 2006 VW Jetta
  • The undercarriage on TDI and non-TDI models of your 2006 VW Jetta is different enough in a number of areas that disqualify the Curt # C11474 from being a fit, it is definitely not the muffler only. It is designed to angle at both ends of the crosstube, whereas the Draw-Tite # 24866 has a crosstube which is straight at one end, allowing for more flexibility during the install. The good news is that the Euro-Style Drawbar # C45561, which has a 1-7/8 inch hitch ball, or # C45562, which...
    view full answer...

  • Recommended Euro-Style Ball Mount for a 2015 Nissan Altima with Curt Class I Trailer Hitch
  • The recommended 2 inch Euro style ball mount for Curt trailer hitch # C11352 on a 2015 Nissan Altima is # C45572. I went out to the warehouse and pulled one to take some measurements. From the center of the pin hole to the part of the shank where it starts to bend up is 3 inches. This will work because the rear bumper on the Altima tapers upward above the hitch receiver. At 6-1/2 inches out from the center of the hitch pin hole, where the shank starts to bend straight up, it is at a...
    view full answer...

  • What is the Rise on Curt Euro-Style Ball Mount # 45562
  • For Curt Euro style ball mount # C45562, it measure 3-1/8 inches from the top of the shank to the beginning of the vertical curve that leads up to the ball. To the bottom of the ball is just over another 2 inches so it is about 5-3/8 inches to the bottom of the ball measuring from the top of the shank. I have included a picture showing the measurements.
    view full answer...

  • Least Visible Hitch Recommendation for a 2016 Dodge Charger
  • The least visible hitch we have for your 2016 Dodge Charger Scat Pack is going to be the Draw Tite # 36548 that you referenced. This hitch has a 1-1/4 inch opening which would be smaller than the 2 inch hitches and due to it's safety chain loop design would be less visible than the Draw Tite. This hitch fits all models of the 2016 Charger as well. The hitch has more than enough capacity to tow your trailer but you would need to check the owners manual of your vehicle to be sure you don't...
    view full answer...

  • Choosing Correct Ball Mount for 2014 Mercedes Benz GLK 250 BlueTec w/ Factory Hitch
  • I would imagine that Mercedes puts a Class III hitch on that vehicle as the factory option. You can confirm that by measuring the INSIDE dimension of the receiver opening. If it measures 2 by 2 inches, it's a Class III. If it's 1-1/4 by 1-1/4 inches, its a Class I or II. The sticker on the hitch should tell you which. Both the ball mounts you mentioned could be used in a Class I or II hitch, as long as the capacity of the hitch or the ball mount isn't exceeded. If you have the Class...
    view full answer...

  • Could 2001 Honda Accord Tow Small Trailer with Motorcycles
  • The total trailer weight and tongue weight you mentioned having of 55 lb tongue weight and 455 lb total trailer weight would fall well within the towing capacity of your Accord so you'd be totally safe with this setup. I know you have a hitch already but for trailer wiring then the kit we'd recommend is the part # 118336 because it installs very easily and has the most reliable converter box of the kits we offer. For ball mounts you'd want the part # C45562 for if the trailer needs a...
    view full answer...

  • Comparing Actual Height Rise of Curt Class II Euro Ball Mounts C45572 and C45562
  • The nature of the Euro ball mount design, which has a curved shank and a shorter actual ball height than a free-standing hitch ball like # 19258, can allow for multiple interpretations of the actual rise. Not to worry. What I did for you was go to our warehouse and measure these two items. For the time being please ignore the specs and if you would use the following dimension I took on each ball mount. What I did was measure the distance from the TOP of the square shank to the TOP of...
    view full answer...

  • Where is the Rise Measured from on a Curt Euro Ball Mount
  • The 3-1/8 inches of rise that the Curt Class II Euro Style Drawbar # C45562 has is measured from the top of the shank to the beginning of the vertical bend below the ball. Check out the video I attached to see this measurement.
    view full answer...

  • Will the Curt Class II Euro Style Drawbar, # C45562, Fit a 2008 Ford Escape with 1-1/4 Inch Receiver
  • The Curt Class II Euro Style Drawbar, # C45562, fits a 1-1/4 inch receiver and has a 2 inch diameter ball. Normally on a Class II trailer hitch, you have to use the ball mount recommended by the hitch manufacturer to avoid voiding the warranty. Otherwise to choose the correct ball mount you would follow the steps to measure for rise or drop in the FAQ I have linked for you.
    view full answer...

  • 2 inch Euro Hitch Ball Mount Recommendation for Use with Curt Hitch # C121231
  • Yes, if you wanted a 2 inch ball Euro ball mount to go with the Curt Hitch # C12123 you'd want the # C45562 as well.
    view full answer...

  • Trailer Hitch Recommendation for a 2004 Jaguar S-Type
  • Yes we do. The Curt hitch you referenced is actually a fit for your 2004 Jaguar S-Type and would work well. For a ball mount with a 2 inch ball you would want the part # C45562 or for one with a 1-7/8 inch ball you would want the part # C45561. For trailer wiring you would then want the part # 56195.
    view full answer...

  • Curt Euro Style Class II Ball Mount with 5-1/8 Inches of Rise
  • The part # C45562 you mentioned is the Curt Euro Style ball mount with 5-1/8 inches of rise. I just went out to our warehouse and measured it for verification.
    view full answer...

  • Would Curt Trailer Hitch for 2016 Volkswagen Jetta Tow Motocross Bike Trailer
  • Looking at the picture you sent in of your motorcycle trailer it would pretty easily weigh less than the 2,000 lb capacity of the Curt Hitch part # C11474 that is a confirmed fit for your 2016 Volkswagen Jetta. You probably have about 400 lbs of dirt bikes and the trailer probably only weighs a few hundred lbs as well. For a ball mount with a 2 inch ball you would want the part # C45562 or for 1-7/8 inch ball you would want the # C45561. For trailer wiring you then would want the...
    view full answer...

  • Will 5/8 Hitch Pins Fit All Curt Euro Hitches
  • For smaller hitches like the Curt Class II Euro Style Drawbar with 1-7/8" Ball # C45571, the Curt Class I and II 1/2" hitch pin # C21403 would be needed to fit those euro hitches. Included are video resources with additional information to get you started.
    view full answer...

  • Trailer Wiring Recommendation for a 2016 Ford Fusion Titanium
  • The Tow Ready Wiring Harness part # C56302 is trailer wiring that has been confirmed as a fit for your 2016 Ford Fusion Titanium so I would recommend it for you. If you need a trailer hitch the Curt part # C56351 has been confirmed as a fit. For a 1-7/8 inch ball mount the part # C45561 would work or the # C45562 for a 2 inch ball.
    view full answer...

  • Will Curt Trailer Hitch C11701 Fit 2005 Mercedes-Benz E-Class with Dual Exhaust
  • There will be no issue with the dual exhaust on your 2005 Mercedes E-Class sedan and the Curt Class I Receiver Hitch # C11701. This hitch does require drilling for installation. I have attached installation instructions for you. If you are planning on doing some light-weight towing, the ball mounts recommend for use with the # C11701 hitch are # C45562, # C45017, and # C45561. For trailer wiring, you will want to see your local Mercedes-Benz dealer.
    view full answer...

  • Could the Curt Trailer Hitch for a 2001 Volkswagen Jetta Wagon Tow a Jet Ski Trailer
  • The Curt hitch part # C11083 has been confirmed as a fit for your 2001 Volkswagen Jetta Wagon and would have the capacity to tow a trailer as long as it weighed less than 2,000 lbs. You will need to check the owners manual of your vehicle to make sure that it also has the needed capacity to tow your Jet Ski trailer. For a 1-7/8 inch ball mount you would want the part # C45561 or for a 2 inch ball mount # C45562. For trailer wiring you would then want the part # C56175.
    view full answer...

  • Does Curt Trailer Hitch Fit 2015 Dodge Charger SRT
  • We checked with Curt and they state that their Class II hitch part # C12064 is a fit for all models of the 2015 Dodge Charger including your SRT model so we can also guarantee it as a fit. For a ball mount with a 1-7/8 inch ball you would need part # C45561 or a 2 inch ball part # C45562. For trailer wiring you would need the part # C56234.
    view full answer...

  • Parts Needed To Add Bike Rack to 2001 Mazda Miata with Class I Trailer Hitch
  • Sounds like your Mazda Miata's trailer hitch is a Class I trailer hitch with a 1-1/4" receiver. If so you won't need any additional parts to attach a bike carrier. You'll just need the carrier. For a bike rack, I recommend going with the Kuat Beta 2 Bike Rack, # B202-114. This is a quality, lightweight bike rack that is compatible with Class I trailer hitches. I have attached a video review of the bike rack for you to check out. If you plan on carrying any womens, childrens or alternative...
    view full answer...

  • Trailer Hitch to Carry Bikes with a 2010 Nissan Sentra
  • To carry bikes on your 2010 Nissan Sentra I recommend the Draw-Tite trailer hitch # 24794. It is the most popular hitch option for your Sentra. This trailer hitch has a 1-1/4 inch receiver opening and is rated as a Class I. Because it is a Class I trailer hitch you will need a bike carrier that is rated for use on a Class I trailer hitch and you are limited to carrying a maximum of 2 bikes. For a compatible bike carrier that meets those requirements I recommend the Swagman Trailhead...
    view full answer...


Do you have a question about this Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Kristina F
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.