To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This sturdy steel replacement bumper has a diamond tread surface to provide grip as you step into your truck bed, built-in hitch ball holes, and an 8,000-lb capacity. Powder coat finish resists rust. Custom mounting kit included.
Features:
Specs:
Constructed of high-strength steel, this rugged utility bumper is sure to last. The silver powder coat finish helps to resist rust and corrosion while also providing sleek styling. And the ribbed face improves both the appearance and the strength of the bumper.
The diamond tread design on the top of this step bumper provides a tough, non-slip surface for you to easily climb into and out of your truck bed.
Designed to meet or exceed the towing capacity of your vehicle's factory bumper, this Fey Diamondstep bumper can haul up to 8,000 pounds when you add on a hitch ball (sold separately), which must have a 1-inch-diameter shank.
Ratings & Reviews
finally got chance to install bumper on truck. the installation was rather simple a little akward for 1 person to do but I was able to install it fairly easily. This bumper is a great fit on my truck. The only fault I found was my truck had factory reciever hitch, so had to remove a bracket holding hitch to install bumper otherwise the bumper fit nicely. I would recommend this product to others. Attached are some before and after pics.
WE ARE MOUNTING IT NOW AND IT LOOKS GOOD. IT DID ARRIVE WITH MINOR DAMAGE. THE TOP DIAMOND PLATE WAS LIFTING OFF THE CENTER OF THE BUMPER.WE WERE ABLE TO REPAIR IT.
Order was received quickly, great customer service. Doesn't fit/look exactly like original bumper. But quality is good and over all I am statified with it. It's a 1991 Jeep Comanche Eliminator and I am the original owner, so it's a visual adjustment to the new bumper and fit ( from the rear, I see more spare tire and exhaust pipe but I am getting used to it). Hard to find original parts for a (almost) 35 yr old vehicle (but you came darn close). Thanks.
Overall quality is excellent, but...
So, there's a hole for a hitch ball, and two more as places to attach safety chains...but no way to hook safety chains into them! I had to make my own safety chain loops that bolted into the holes. Seems like an intentional oversight (cheaper, but poor usefulness). Maybe they should have been included in the $[XX] mounting kit, which is a terrible price for a few bolts and 2 short pieces of steel.
Bumper installed easily and looks great. Frame bracket holes lined up perfectly, and the bumper lined up on the brackets with very little effort. It took me about 1 hour to remove the old bumper and install the new bumper. Recommend having an assistant to at least help hold the bumper while lining the bolts up. It is exactly what I expected. The safety chain holes are a bit further from the edge than my old bumper, but I picked up two shackles and that issue was resolved.
I am very impressed with this bumper. I bought it as a replacement for my 77 Ford F150. I've been restoring this truck since 2006, and the original bumper was too far gone to save. I was trying to match the original as closely as possible and this one was perfect.
It came with everything needed, right down to the license plate lights and bulbs. It was easy to install with the supplied directions and it looks great on the truck! Good price, free shipping, and very good quality. Five stars all day long.
Exactly as advertised fit perfectly on my 85 ranger and looks great.
Love my new Westin Fey step bumper easy to install, great solid bumper and looks good highly recommended. Thank you etrailer great shipping updates and fast delivery
The product is top quality, nice and heavy-duty and clearly well built!! I love how it's not flashy and matches the original step bumpers from the 1970's and 80's Ford trucks very well! There was an issue with shipping and my hardware kit ws damaged and missing parts - but Austin in customer care took care of it for me in no time. Got my replacement hardware kit in just a few days. I would highly recommend this product to any vintage Ford/Chevy truck owner who wants a new bumper that has the same characteristics of the original step bumpers.
Another great E-trailer experience!!!
Bumper arrived well packaged and exactly as shown on the site with all mounting components.
Quick and easy one person install (minus the time taken to reposition original body damage from original bumper position)
Next project for the Nissan hardbody is the base plate to get it behind my motorhome.
E-Trailer
I like that there was a PDF installation sheet before I purchased this, so I could confirm the dimensions. The box and the shipping went well and I'm pleased to have an installation kit for this bumper. I like the finish, however, I would prefer the manufacturer did not put black silicone to seal the diamond plate to the curve of the bumper. It doesn't stick very well to the finish and will be an eyesore until I remove it with some robust scrubbing. If the idea had been to prevent moisture intrusion, it wasn't followed up with any sort of seal on the inside under the diamond plate. The installation kit was fine and I installed the bumper according to the instructions. I do know that the distance between the frame members on my truck is what they predicted. However, the spacing on the tabs on the bumper were 3/8 of an inch wider on each side. I made myself some 3/8 inch thick aluminum spacers, and everything aligns quite well. I'm not sure what the manufacturer had in mind by saying the "hitch-width" was three-quarter inch wider than the frame rails which it correctly identified. Had I not put spacers in, it would've really wrenched on the metal pieces or the frame of my truck. Overall, I would buy this again, and recommend somebody else do the same. Of course, with the caveats that I've identified.
Bumper came as expected, good quality. The install kit worked, however the instructions are not correct for how to mount to the truck. Simple fix, just backwards and turned around from what the instructions say to do. All the holes lined up once you do that! Shiniest part of this truck now lol!
Product looks great, packed well. Thank s!
The bumper fit my van really well and product delivery was excellent. The bumper was packed very well; however, there was one small dent in the bumper...not noticeable enough to send bumper back.
Thanks,
Kim
It's sturdier than the OEM bumper. It didn't wrap as tight around the corner of the van as the OEM bumper, but it looks great.
As described. Not exactly the same as stock, but for the price it was great. Thanks
Year later am I'm just as pleased as I was the day I received it. Still looks new. Was a great purchase for me, and without doubt, is a excellent product.
Product was a exact match for the one being replaced. Just what we were looking for. Ordering was a breeze. Customer service was very helpful.
Item was as shown.Item was shipped fast installed fairly easy all brackets are included instructions were understandable.
The only drawback is the bumper does not fill the indentation in the body at the corners the way the stock bumper did it is 2.5-3.0 inches short.
Great bumper. Heavy, solid. Perfect for step and to protect the back of van from weak imports that try and run into you.
My order showed up exactly what was advertised in good shape. I will order from them again in the future!
Do you have a question about this Bumper?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.