These handy straps offer an alternate way to mount your Saris Bones bike rack to your hatchback vehicle. They replace the standard top hooks and anchor the rack to the hatch for a secure, custom fit.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. It's Evangeline here at etrailer and today we'll be taking a look at our Saris Hatch Huggers for your Saris trunk mounted bike rack right here at etrailer. So here at etrailer we install a lot of bike racks on a lot of vehicles. I'm probably the one on the team that enjoys installing trunk mounted bike rack the most, just because I enjoy the challenge of figuring out where all the straps go, how to get the best tension on them. It's really tricky, which I know, you know, if you've ever installed a trunk mounted bike rack. Now, if you want to install them on vehicles with hatchbacks or SUV's what you usually need are Hatch Huggers, like what we have here.
So it's nice that Saris has these Hatch Huggers just to make sure that their Saris Bones are compatible with multiple vehicles. I still kind of wish they included them with the bike rack itself, but definitely something worth adding on if you already know you're gonna be mounting a trunk mounted bike rack. This is a confirmed fit for most of your SUV's and it's very easy to switch them out. So if you have a Saris trunk mounted bike rack and then you also have a vehicle with a hatch what is probably gonna happen, is that they're gonna recommend you replace the top straps with Hatch Huggers like these. So what we have here is a Prius V with a hatchback, and since there's a spoiler on top, I didn't want to have to use the hooks 'cause that might bring my spoiler down.
We have the Hatch Huggers now that's taking the tension off the spoiler, as well as giving us stability for our bike rack. So we have a lightweight material on the inside, but on the outside we have these foam or these foam blocks. So these can be adjusted depending on the size of your hatch, as well as if you need to attach a strap. That strap is connected to our trunk rack. So this one is tensioned down since our bike rack is mounted.
So notice how it's distributing the weight between our hatch and our ceiling giving us that stability, but also not putting too much pressure on any one point. So what's holding the Hatch Hugger is this strap. So notice how it's running through the seam of our door's hatch and it's beside the latch too. That way it doesn't go out to the side. It's thin enough where it fits right there, but it's sturdy enough just to give you that strength.
These replace the current hooks on your Saris Bones rack, so let's take a look at how you switch those out. So the install process is really very simple. You're just replacing your upper hook on your Saris Bones with the Hatch Hugger. Now notice how we have it already installed with the strap. In case it came without the strap on there you can just pull this foam pad off. But with everything in place on your Hatch Hugger, just undo the buckle for your hook first. Just double check that this is the upper hook. Yep, It is. And then just get your Hatch Hugger strep and put that into your cam buckle. And just like that you're now ready to put your Saris Bones onto your vehicle. Please follow the specific fit guide instructions for your specific vehicles when doing so. Always good to see that you have everything you need. So depending on how your hatch is designed, what you may actually need to do is take the Hatch Hugger out of your bike rack first and then attach it later. So notice how I have my latch right over here, and I don't have much of an opening. So I have my hatch hugger, and I'm just gonna feed that strap up through the hatch. Now, get that strap through your hatch, just enough where your Hatch Hugger sits below the lip of your door. So with these in place we can now close our hatch and then install our bike rack, not forgetting to put the straps onto the top of our Saris Bones. So make sure that your strap feeds in through the top of the dog leg feet. So notice how we have a gap between our spoiler and our strap, only meeting in towards the very end. So that's how the Hatch Hugger works, just taking the tension off of your spoiler. Now don't forget to tuck the excess strap back into your Saris Bones bike rack and use the end cap to secure it. And that's it for the install of your Saris Bones Hatch Huggers for your Saris Bones bike backs..
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.