bing tracking image
  1. Accessories and Parts
  2. Tekonsha
  3. Trailer Brake Controller
  4. Wiring Adapter
  5. Plugs into Brake Controller
  6. Universal
Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long
Tekonsha

Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long

Part Number: 7894
In Stock
$13.75
Retail:$25.69
You Save: 46%
Accessories and Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Use this pigtail wiring harness to quickly and easily transfer your brake controller between vehicles or to replace a lost or damaged wiring harness. Works with most Tekonsha and Draw-Tite brake controllers. 1-800-940-8924 to order Tekonsha accessories and parts part number 7894 or order online at etrailer.com. Free expert support on all Tekonsha products. Great prices and Fastest Shipping for Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (183)
  • Q & A (0)
  • Photos

Tekonsha Accessories and Parts - 7894

  • Trailer Brake Controller
  • Wiring Adapter
  • Plugs into Brake Controller
  • Tekonsha
  • Universal

Use this pigtail wiring harness to quickly and easily transfer your brake controller between vehicles or to replace a lost or damaged wiring harness. Works with most Tekonsha and Draw-Tite brake controllers.


Features:

  • Lets you move your brake controller to another vehicle in a snap or replace a wiring harness
    • Substitute for a lost or damaged wiring harness
    • Plug one end into your brake controller and hard-wire the other end into your alternate vehicle to make your brake controller portable
  • Saves money - no need to buy multiple brake controllers for your vehicles
  • Works with a variety of Tekonsha and Draw-Tite brake controllers
  • Includes butt connectors for installation
  • Measures approximately 34" long


If you ever tow with more than one vehicle, use this extra wiring harness to switch your brake controller from one vehicle to another at a moment's notice. Just hard-wire this pigtail harness into your alternate vehicle, tuck it away, and when you want to switch tow vehicles, plug in your brake controller. Or simply use it to replace a lost or damaged wiring harness.



7894 Replacement Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers




California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

183 reviews
Use this pigtail wiring harness to quickly and easily transfer your brake controller between vehicles or to replace a lost or damaged wiring harness. Works with most Tekonsha and Draw-Tite brake controllers.

by:

Nice and Easy



by:

Great way to share brake controller between multiple vehicles.



by:

Product was just what i needed and worked great.Simple to install and took about 15 min.



by:

Hard a hard time finding product, found on your website



by:

Allowed sharing brake controller between two vehicles. Factory part fit as expected



by:

exactly what i needed and easy to read and understand instructions.Very satisfied with product.



by:

Wire harness fit was just what I needed to make the installation complete.



by:

I had the pleasure of dealing with Odelia when ordering. Odelia was fantastic and made the ordering process very easy. I have ordered multiple times over the years with ETRAILER.COM, it is always accurate and as described. Don't hesitate to order, it is a great company to purchase items. Thanks again Odelia.

Stephen profile picture

Stephen

3/6/2025

Working out as intended, no issues. Quality item and has held up well.

Jesse M. profile picture
Etrailer Expert

Jesse M.

3/6/2025

@Stephen Awesome! Thanks for sharing. Glad to hear you are happy with your experience, and with the parts you ordered. Your kind words are appreciated. Feel free to come back anytime you need anything. There will always be a real person here for you to talk to :)


by:

Well it was what I needed to be able to disconnect my brake controller from the vehicle's wiring. It seems like it will work fine.



by:

Installation was straightforward and worked well. I am a believer in electric brake controllers!



by:

Great product, great price



by:

I ordered these parts to replace a controller that went bad in one of my work vans. The etrailer website was very helpful with pictures and descriptions of the various controllers that would work for my vehicle and suggested i order an optional wiring harness, which i did. The pricing was good. Also i didnt ask for it, but after i ordered online, the sales dept upgraded the shipping at no additional cost and i got an emails when it shipped and when it arrived. Overall im very pleased with etrailer. Thank you

Francis profile picture

Francis

11/12/2018

There still working



by:

Didn’t take any time to hookup, just have to pay attention because wires are different colors on the Tahoe than the brake controller. The vehicle wires have a paper tag that tells which wire goes where as does the instructions on the controller. I can confirm the wiring harness and Takonsha P3 will work on a 2023 Tahoe!

Melross profile picture

Melross

1/12/2024

Perfectly!



by:

Great item, great company.



by:

Both of my items (trailer wire harness and trailer axle) came in perfect condition and right on time. I couldn’t be happier with etrailer! They also have a great selection and you can’t beat the prices.

Katie profile picture

Katie

8/9/2020

Thousands of miles later the axle is still working great! I highly recommend it as a replacement axle, my trailer had a lower pound rear axle and was bent after a few years of use, the axle from e-trailer was easy to install and has been great!



by:

Completed the entire installation in about 15 minutes. I watched the etrailer [install] video for the installation and it was a breeze.

Todd L. profile picture

Todd L.

7/20/2020

After one year of use, no issues and works as needed.



by:

etrailer was the best company I've ever dealt with online. I told Melinda E. what I wanted to do and she put together a package of the hitch, wiring harness, and brake controller for me.

Everything installed perfectly and I just got back from towing a 10,000 lb trailer over 600 miles.

I have already recommended etrailer to friends and I can confidently say they are the ONLY place I'll buy trailering equipment from.

Thanks Melinda!!



by:

Great customer service.



by:

I didn't get this to replace a bad connector but to install my Tekonsha Prodigy P3 into another truck. I have more than one truck I tow with so using this harness and the mount bracket (part # 5906) I'm able to move my brake controller to whichever truck I'm using to tow with. The bracket and harness are MUCH cheaper than buying another controller and the bracket is made to be able to quick release the controller. This ability to move the controller from truck to truck is one of the reasons I chose the Tekonsha Prodigy P3 brake controller in the first place.



by:

Great price on a pigtail harness for the Prodigy brake controller! This particular item has longer wires than a similar harness listed on this site and also includes crimp connectors as well. The best part was that it costs less than the regular harness.



by:

My husband trust your company because it has been around a long time. We are getting our trailer ready for another summer of camping and you have the parts in stock and ready to send when we need them. Part arrived sooner than expected and fits perfectly. Thank you once again!



by:

I needed to be able to move my brake controller between vehicles. For a fraction of the cost of a second controller I was able to easily install a bracket and wiring harness in my second vehicle. etrailer provided good parts, great prices and fast shipping.



by:

Purchased to compliment my Draw-Tite I- Command Proportional controller (P#5535). Made for easy install in my 97 Ram 1500. Used with the ETBC7 Wiring harness.



by:

This wiring harness was exactly what I needed to install my trailer brake controller in my new van. Wire guage matched that of my van and also included connectors making it quick and easy. Etrailer does it again.



by:

Was shorted a wiring harness for a break controller from another supplier so ordered it from etrailer. Original suppier finally sent the harness so etrailer was kind enough to let me return theirs for full price less original shipping. Thank you etrailer.


25
183
Show More Reviews

See what our Experts say about this Tekonsha Accessories and Parts

  • Primus IQ Brake Controller Wiring Functions
    The Primus IQ # TK90160 doesn't have instructions that come with a wiring diagram, but we have a picture/diagram on our site that shows which wires are connected to which functions on your vehicle. I attached the diagram for you to view, the wires will be connected as follows: White - Ground Black - 12V Power Blue - To 7-Way at rear of vehicle Red - Cold side of stop light switch If you are needing a new pigtail for your Primus IQ it is part # 7894. This same harness will work with most...
    view full answer...
    Image 1 for Image 2 for
  • Is there a Vehicle Specific Pigtail to Install Tekonsha P3 in 2008 Jeep Grand Cherokee?
    Hello Gregg, I am not showing that any of the brake controllers have a vehicle specific pigtail for the 2008 Jeep Grand Cherokee. Did you confirm that there is a plug-in under your dash? if so, can you send me a picture of the plug in (please include one where I can see the whole plug, and one close up of the inside) by responding directly to the email that you receive. I am showing that you would need to hard wire the P3 by splicing in the universal pigtail # 7894. Please let me know...
    view full answer...
  • Recommended Wiring for Tekonsha Prodigy P3 Brake Controller in 1986 Suzuki Samurai
    For your 1986 Suzuki Samurai, you can absolutely use your Tekonsha Prodigy P3 brake controller # 90195. You will need to start with the Curt Circuit Protected Converter w/ SMT # C56175 to get a 4-way trailer connection if you don't already have one. Then you will use the Universal Brake Controller Wiring Kit # ETBC7 to add the other features and install your brake controller. You can use the Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long # 7894 to connect...
    view full answer...
  • Adding A Brake Controller To A 2024 Tesla Model Y
    Hey Anthony, It looks like there's a proprietary pigtail wire harness (p1072586) to connect to the factory plug behind the trim on the driver's side and the brake controller's wire harness. From what I can find some people say that it's included and should be found in the glove box and others state that Tesla's completely against giving them out to Model Y owners. I would check to see if you have it and if not reach out to Tesla. There's a couple of videos out there where people have...
    view full answer...
  • How to Install a Brake Controller in a 1994 Dodge Ram 1500 with Factory 7-Way Connector
    There isn't a custom brake controller wiring harness available for your 1994 Dodge Ram 1500. It is possible that Dodge makes one that will fit your truck but as far as an aftermarket one none are available for the 1994 models. A brake controller would have to be partially hardwired in. The custom harnesses are only confirmed to fit 1995 and later models. To install the controller, you will just need about 25 feet or so of wire # 12-1-1, sold by the foot, and a 30-amp circuit breaker #...
    view full answer...
  • What Brake Controller is Better, Tekonsha Prodigy P2 or Pro Series Pilot for 2019 GMC Terrain?
    Hello Patrick, Between the 2 brake controllers that you mentioned I would go with the the Tekonsha Prodigy P2 # 90885. The main reason is because the Pro Series Pilot # 80550 is time delayed, so there will be a delay from the time that you hit your brakes in your GMC for the brakes to be applied on the trailer. Honestly, I am surprised that they still make the time delayed brake controllers. The Tekonsha P2 # 90885 is a proportional brake control, meaning that it works at the same time...
    view full answer...
  • How To Install And Extend Prodigy 3 Brake Controller Wiring On A 2020 Chevrolet Tahoe
    In order to install a brake controller on your 2020 Chevrolet Tahoe, you can use the Tekonsha Prodigy P3 # 90195 with harness # 3016 and plug it into the factory harness under the dash on your Tahoe. You do not need to make any type of wiring extension for this installation. I have attached an installation video for this process, along with a photo that shows where the harness plugs into your Tahoe under the dash.
    view full answer...
    Image 1 for
  • Hardwiring Tekonsha Prodigy P3 Brake Controller in 2011 Chevy Traverse and 2015 Chevy Colorado
    For your Prodigy P3 # 90195 on your 2011 Chevy Traverse, if you have the factory 7-way then you just need wiring harness # 3026-P. If you don't have that then we recommend using the # ETBC7 kit that will have you hardwire from the battery using a circuit breaker. The circuit breaker used for the brake controller power is a 20 amp like # PK54520. I've attached a video of the 12V power wire connection, but it does not include the brake controller power connection that will be nearly...
    view full answer...
  • Looking For Longer Wire Harness For Tekonsha Prodigy P3 Brake Controller
    Hello Rick, we sure do. For a longer harness for the Tekonsha P3 Controller you can use the following: - Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long # 7894 Or if you have some extra wire laying around you could use a length of wire and a few heat shrink butt connectors and make your own extended harness.
    view full answer...
  • Pigtail For Tekonsha P2 On 2024 Chevy Tahoe
    Hello George, thanks for reaching out. If your 2024 Tahoe has the same 2 wires as the 2022 in the video you mentioned, you can use a universal pigtail to wire in your P2 Brake controller. For that, you can use the following: - Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long # 7894 Leave a reply below with any other questions or comments and I will get back to you.
    view full answer...
  • Tekonsha Prodigy P3 Wiring Harness For 2011 GMC Sierra 1500
    Hey Reggie, thanks for reaching out. So we do have a wire harness for the Tekonsha P3 on a 2011 GMC 1500, it is the universal 4-wire pigtail that comes with the P3 controller (pictured below). The 2011 GMC 1500 does not have a plug present under the dash, but the brake controller wires are already present under the dash. You will just have to splice the universal pigtail into the wiring under the dash and you will be good to go. If you need the pigtail by itself we offer it as part #...
    view full answer...
  • What Bracket do I Need for My Reese Echelon and Universal Pigtail for My 97 Chevy K3500?
    Hi Jeff, I’d be happy to help you get set up with the right parts. Yes, the Echelon is discontinued so finding the right parts for it can be a little tricky. We have a bracket that I believe will work for you—the Replacement Mounting Bracket for Tekonsha Voyager Brake Controller # 2178. I've attached an image with the dimensions so you can compare it to your existing setup. For the pigtail, you’ll need the Pigtail Wiring Harness # 7894, which is 34" long and compatible with Tekonsha,...
    view full answer...
  • How to Make Extension for Tekonsha Brake Controller Wiring Adapter TK93VR
    Brake controllers are usually mounted so that they are within easy reach of the driver for emergency stops, typically near the driver's right knee. The quick-connect wiring adapters we offer, such as # TK93VR, are long enough for such installations but if you want your controller to be positioned elsewhere you can simply add on Pigtail Wiring Harness # 7894. This 34-inch extension will splice to your existing adapter, color for color, using the included butt connectors. For mounting your...
    view full answer...
  • Recommended Weight Distribution Hitch For a 2022 Toyota Highlander Towing Kodiak Travel Trailer
    Yes, the 2022 Toyota Highlander AWD, V6 with the factory hitch installed will be an adequate tow vehicle for your Kodiak 172E travel trailer. I do recommend using a Equal-i-zer Weight Distribution System # EQ37060ET as it will offer you a safer more comfortable drive. On top of the weight distribution it offers to keep your Highlander level when you are towing for improved steering and braking, it also offers sway control to keep your Kodiak driving straight while experiencing windy conditions...
    view full answer...
  • How Much Power/Amps Does the Tekonsha Prodigy P3 Draw
    The Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 will draw 1 amp of current per volt sent to the trailer brakes on a tandem axle trailer and 1/2 amp of current per volt sent to the trailer brakes on a single axle trailer. Therefore, the max amp draw would be around 12 for a tandem axle trailer or 6 for a single axle trailer. In order to transfer the Tekonsha Prodigy P3 from one vehicle to another you would need both the Pigtail Wiring Harness part # 7894 and the Replacement...
    view full answer...
  • Voyager Brake Control Wiring Diagram for Installation in a 2005 Chevrolet 1500 Silverado
    The connections you will need to make to install your Voyager brake controller are listed below. If your Voyager has a connector attached to the wires at the back you can use the Pigtail Wiring Harness, # 7894, to connect to the wires on the connector supplied by GM that is similar to the # 3015-S connector we carry. If you wanted a complete harness without splicing you could use the plug-in wiring adapter, # 3015-P. I have added a photo of the connector for the 2005 Chevrolet Silverado...
    view full answer...
    Image 1 for
  • Wire Gauge and Circuit Breaker Required for Brake Controller Isntallation
    The Tekonsha BRAKE-EVN Trailer Brake Controller # TK63VR includes a hardwired connector that is intended to connect to a vehicle-specific harness on vehicles that have a direct connection port or to a pigtail # 7894 to allow a hardwired installation in a vehicle that does not have such a connection point under the dash. This pigtail harness is 34-inches long, long enough for most installations. The black and blue wires on this part are 10-gauge and the others are 12-gauge; butt connectors...
    view full answer...
  • Parts Needed To Connect a Tekonsha Prodigy P3 Trailer Brake Controller On a 2022 Tesla Model Y
    The Tekonsha Prodigy P3 Trailer Brake Controller # 90195 will come with a 12" Universal Wire Harness # 20127 for connecting to your 2022 Tesla Model Y. There is not a plug and play harness made for any Tesla vehicle. A 34" Universal Wiring Harness # 7894 is available if you prefer to have the additional length. To wire the in the Brake Controller the Tesla Pigtail # 1072586-00-A will allow you to tie into the wiring for the 7-way on your Tesla.
    view full answer...
  • Can a Brake Controller Be Installed On an Older Truck
    It sure will! A brake Controller isn't a vehicle specific item, you can install a brake controller in just about any vehicle. To swap the controller back and forth, you'll need a # 7894 pigtail and a # TK5906 Replacement mounting bracket kit. To install the brake controller, you'd need our brake controller wiring kit, part # ETBC7. Here's a quick run through of the installation: The 4 pin to 7-way adapter incuded with the kit can be installed in 2 ways. You can either cut off the 4 pin...
    view full answer...
  • Installation of Brake Controller on 2011 Chevy Silverado Where No Power Is Present on Wires
    It looks like you've got a 2011 Chevy Silverado, and it's likely that you just don't have power on the wires you've connected the Pigtail Wiring Harness # 7894 to on your vehicle. If you haven't already, you should test the power wire to see if it's active when you turn the vehicle on. There are two wires under the hood that have to be connected to make the tow package functional, one is the power wire to the brake control and the other is the battery charge line to the 7 way connector....
    view full answer...
    Image 1 for
  • Compatibility and Installation of Tekonsha P2 Brake Controller Replacing Hopkins Brake Force
    Good news. I have a solution for you but you will not be able to use the same plug for the P2 # 90885 as you did for the Hopkins Brake Force. There is a connector that will come with the # 90885 that you will want to just snip off the end of your old Hopkins Brake Force wiring adapter and splice this one in. If you already have the P2 # 90885 and are just in need of the adapter it is also sold separately as # 7894. I have linked the above mentioned parts as well as an image of this...
    view full answer...
    Image 1 for
  • Installing Brake Controller and 7-Way On 2013 Lincoln MKX
    The Universal Installation Kit for Trailer Brake Controller part # ETBC7 is just what you need to install a 7-way on a 2013 Lincoln MKX with existing 4-way like the T-Connector Vehicle Wiring Harness part # C56121. There would not be any issues with the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 either. It should have come with a hardwire harness but if you no longer have this the Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers part # 7894 will work. In...
    view full answer...
  • Installing a Tekonsha Brake Controller on a 2014 Porsche Cayenne
    You can use your Tekonsha brake controller in your 2014 Porsche Cayenne, however, there are not custom wiring adapters available for the Cayenne, so you will want to splice in a universal harness, # 7894. Installing a brake controller on your Cayenne using the factory brake controller wires can be a little tricky so I attached a help article that explains the installation process in detail. The installation covers all Cayennes from 2005 to present.
    view full answer...
  • Where is the Brake Controller Port Located on a 1995 Dodge Ram 1500
    We have pictures of the brake controller port on 1995-2009 Dodge Rams. I have added a link to a brake controller and harness for a 1995 Dodge, part # 90885 and adapter part # 3020-P. Towards the bottom of the page you will see two pictures that show the port with a controller harness plugged in. It is almost directly above the emergency brake.
    view full answer...


< Previous
123. . .8



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane H
Test Fit:
Shane H
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<