bing tracking image
  1. Accessories and Parts
  2. Tekonsha
  3. Trailer Brake Controller
  4. Mounting Hardware
  5. Brackets
Replacement Mounting Bracket for Tekonsha Prodigy and P2
Tekonsha

Replacement Mounting Bracket for Tekonsha Prodigy and P2

Part Number: P7685
In Stock
$10.57
Retail:$23.99
You Save: 56%
Accessories and Parts

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
1-800-940-8924 to order Tekonsha accessories and parts part number P7685 or order online at etrailer.com. Free expert support on all Tekonsha products. Great prices and Fastest Shipping for Replacement Mounting Bracket for Tekonsha Prodigy and P2. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (46)
  • Q & A (0)
  • Videos (1)
  • Photos

Tekonsha Accessories and Parts - P7685

  • Trailer Brake Controller
  • Mounting Hardware
  • Brackets
  • Tekonsha


  • Fits Tekonsha Prodigy and P2 Brake Controllers
  • Kit includes:
    • Bracket
    • (4) mounting screws
    • (2) 12-10 gauge butt connectors
    • (2) 16-14 gauge butt connectors



7685 Replacement Mounting Bracket for Tekonsha Prodigy and P2




California residents: click here


Video of Replacement Mounting Bracket for Tekonsha Prodigy and P2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Feature Breakdown: Replacement Mounting Bracket for Tekonsha Prodigy and P2

Today, we're going to review part number P7685. This is the Tekonsha replacement mounting bracket for the Tekonsha Prodigy brake controllers. This part is designed to fit the Tekonsha Prodigy, the Prodigy P2, and the Prodigy P3 brake controllers. This can be used as a replacement part. It usually will come with those brake controllers. If you happen to lose one, you can buy this as a replacement part. What you can also do is you can buy this as an extra so you can put this in another vehicle and make it easy just to transfer your brake controller from one to the other. This kit does include this metal bracket.

It does include the mounting screws. There is four of them; two for mounting the bracket to the brake controller itself and two for installing the mounting bracket onto your vehicle. It also comes with four butt connectors. Two of them are the size ten gauge to twelve gauge and the other two are size fourteen gauge to sixteen gauge. That should do it for the review on part number P7685, the Tekonsha replacement mounting bracket for the Tekonsha Prodigy brake controllers. .

Ratings & Reviews

4.9

46 reviews

by:

Plug, screw, and go...took just minutes to install...very good communication with shipper



by:

Excellent Service !!! Very Fast Service !!!
Recieved In A Few Days !!!



by:

needed an extra for another car and this was a great find. Thank you.



by:

Ordered online. Product was delivered quickly. Used this to install a Prodigy brake control in our 2008 Land Rover LR3. Thank you!



by:

I needed the standard mounting bracket to mount a brake controller in my 2012 Expedition. The product was delivered in a couple of days, and was exactly as described. I am very impressed with etrailer.com, and the ease of using the website to look up items and place an order. I will definitely be ordering from them again.



by:

Great shopping experience from finding part, part description accuracy and final delivery



by:

The assembly was received and installed it was a perfect fit!



by:

Great inventory to find products I needed. Paul B. was very helpful and proactive in answering my questions as we dialoged by email. Would reccomend Etrailer.com as the first place to look for hard to find parts.



by:

I bought a Tekonsha Prodigy controller from E-Trailer, a trailer hitch and a sway bar attachment. I liked the how-to videos, the good prices and quick shipping.
It's all good at E-Trailer with me!!



by:

Bought a brake controller harness and connector kit for my 2015 Xterra. Both arrived quickly, and more importantly, the harness fit perfectly to the connector in the Xterra, saving me the hassle of custom wiring. Really appreciate that!



by:

brake controller, have not let put it in, because it is to cold, Adam was excellent in trying to get me the right parts that was missing for the order, he had to try three time to get right part,that ok because he got the part good job Adam, I would return and order for adam again thankyou.



by:

Not quite the bracket I was looking for as I use the same controller in 2 vehicles and wanted the plastic bracket that the P2 just slides and clicks in, but I did a phone order and didn't have the part number. This is still easy enough to use and install. Does the job it is designed to do.



by:

Direct replacement for the original that came with the brake controller. If you need a new bracket for your P1 or P2 this is the one go get.



by:

Harness made it a breeze to install the Prodigy 2 controller in my Ram 1500 . Tip: a portion of the lower dash pops off with the removal of two screws and makes it a LOT easier to see what you are doing.



by:

Not much could go wrong; its only a mounting bracket. Fits perfect. Glad the screws were included as I had lost the old ones. Most pleased with the speed of processing and delivery. Was actually here three days before the expected date.



by:

Simple to install and still holds my break controller after 1 year



by:

Good quality bracket for Prodigy brake controller.



by:

Excellent service!!! Products I ordered were exactly what I received!! These guys know what they are doing! Easy ordering process! Highly recommend etrailer!!



by:

Cant really comment on this product as I didn't need this for my application, but customer service was excellent.



by:

Exactly what I needed for a new tow vehicle. Good price and fast shipping.



by:

Product was exactly what I needed and shipping was lightning fast!



by:

Works as expected. If you need another bracket for another vehicle or lost or broke the one that came with it this works great.



by:

I was very happy with the experience, great service, very quick turn around time and the products I ordered were exactly what was represented and what I needed. Will be a return customer.



by:

Fast shipping and part worked perfectly!



by:

I mistakingly left my old bracket in the vehicle when I traded it in. Rather than rig it this inexpensive bracket allowed an easy and clean looking install.


25
46
Show More Reviews

See what our Experts say about this Tekonsha Accessories and Parts

  • Parts Needed To Install Tekonsha Prodigy P2 Trailer Brake Controller in 2023 Jeep Grand Wagoneer
    The Plug-In Wiring Adapter # TK93VR will allow you to connect your Tekonsha Prodigy P2 Trailer Brake Controller # 90885 to your 2023 Jeep Grand Wagoneer. We do have the Replacement Mounts # 7686 & # P7685 should you decide to leave the mounting bracket in your Escalade or they become lost or damaged. The electrical connection for the controller can be hard to find under the dash. I have included a installation video we did for the P3 # 90195 near the bottom of the page you can watch to...
    view full answer...
  • Can a Prodigy P3 Electric Brake Controller Fit into the Mounting Bracket From a Prodigy P2
    The Prodigy P2, part # 90885, and P3 part # 90195, have brackets that are completely different styles so they are not interchangeable. The P2 uses just U shaped bracket, part # P7685, that connects to the controllers pocket, part # 7686. The P3 also has a U shaped bracket, part # TK5904, but instead connects to a cradle, part # TK5906.
    view full answer...
  • Do Tekonsha Prodigy 90185 and Prodigy P2 90885 Use Same Connector Adapter
    Yes, if you're trying to replace your original Tekonsha Prodigy brake controller (obsolete part number 90185), the Prodigy P2 # 90885 will plug right into the same 4-pin wiring adapter, like # 20127. Both use mounting bracket # P7685 and pocket # 7686, so you should be able to slide the P2 right in place of your original Prodigy controller!
    view full answer...
    Image 1 for Image 2 for
  • How to Wire a Brake Controller to a 2003 Monaco Windsor Motorhome
    To install a brake controller in your 2003 Monaco Windsor built on a Roadmaster chassis you will need to hardwire it. I attached an FAQ on how this would be done. Basically you will need to run the blue wire from the controller back to your 6-way. The black wire will run to the positive post of your MH battery through a 20 amp circuit breaker like part # PK54220. The ground wire will run to the negative side of your battery. The red wire will need to be run to the fuse control center,...
    view full answer...
    Image 1 for
  • Replacement Mounting Bracket for Valley Odyssey 52810 Brake Controller
    The closest option we have to what you are looking for is part # P7685, which measures 3-3/16 inches inside width.
    view full answer...
  • Installation Of Brake Controller On 2006 Winnebago Adventurer With Workhorse Chassis
    We do not have a plug-in harness for your 2006 Winnebago, but I do have a solution that will work for you. Since 2006 all Winnebago motorhomes have a 7-way trailer wiring harness but no plug-in adapter for the Workhorse chassis model, so you will need to hardwire a brake controller. I recommend using part # 7894. You will also need a circuit tester like part # PTW2993 to make sure you have the correct wires. You will also need a mounting bracket for the P2. I recommend using part #...
    view full answer...
    Image 1 for
  • Can a Tekonsha Prodigy P2 Be Installed on a 2019 Audi Q5 with Tow Package
    Yes, you can reuse the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 on your 2019 Audi Q5. However, you are going to need a few parts: Replacement Mounting Bracket for Tekonsha Prodigy and P2 part # P7685, Mounting Pocket for Tekonsha Prodigy Proportional Brake Controller part # 7686, and the Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers part # 7894. In addition to these three parts you will also need a factory brake controller pigtail that must be obtained...
    view full answer...
  • Wiring Pigtail Adapter To Install a Tekonsha Prodigy P2 Trailer Brake Controller In 1999 Ford F-250
    To install your Tekonsha Prodigy P2 Trailer Brake Controller # 90885 on your 1999 Ford F-250 Super Duty you need the Tekonsha Plug-In Wiring Adapter # 3035-P. This will connect to the factory connector on your truck. I have linked an installation video below as the factory connector is often difficult to find on your truck. We also have the Replacement Mounting Bracket # P7685 and Mounting Pocket # 7686 if your original bracket was left in the other truck or damaged.
    view full answer...
  • Tekonsha Prodigy P2 Brake Controller Installation for 2008 Toyota Highlander
    The tech bulletin you were referring to is likely one that simply says there is no plug available for a brake controller like the Tekonsha Prodigy P2 # 90885, which means this particular brake controller must be hardwired into your vehicle. This controller is wired the same for all Highlanders, which means the white is ground, black is 12V power, blue is brake controller output and red gets connected to the cold side of the stoplight switch (which means there is only power to this wire...
    view full answer...
  • Install Harness for Prodigy P2 Brake Controller for 2021 Ford F-150
    The correct mounting harness for the Prodigy P2 part # 90885 for your 2021 Ford F-150 is the part # 22292. Your vehicle does not require any special mounting brackets beyond what the controller came with. For a replacement bracket you'd want the part # P7685.
    view full answer...
  • What is Needed to Transfer Prodigy P2 # 90885 Between 2008 Silverado and 2011 GMC Yukon XL
    To easily transfer a Prodigy P2 Brake Controller between two vehicles you will need a second mount, either metal bracket part # P7685 or plastic pocket # 7686. Both options include the required mounting hardware. I have linked representative installation videos for this brake controller in both a Silverado and a Yukon XL. You will also need to equip each vehicle with a Pigtail Wiring Harness # 7894 to allow the controller to simply plug in for use. A Prodigy P2 comes equipped with one...
    view full answer...
  • How to Install a Prodigy P2 Brake Controller in a 2008 Toyota Tundra
    To install your Prodigy P2 Brake Controller part # 90885 in your 2008 Toyota Tundra all you would need is the correct install harness, part # 3040-P and the bracket # P7685. C stands for connected to trailer and N.C. stands for not connected. If your controller is flashing between those two messages then most likely you have an intermittent connection on your brake output circuit due to corrosion on your trailer connecter. Hit the pins of the connector with some fine grit sandpaper.
    view full answer...
  • Is There A Plug And Play Brake Controller Adapter From Tekonsha For A 2024 GMC Sierra 2500HD
    We have just the thing. You can use the adapter # 3064-P to connect your Prodigy P2 # 90885 to the factory brake control harness. Assuming that your 2024 GMC 2500HD does already have a factory 7 way trailer plug on the back, you will have a connector under the dash that you can plug right in to. Simply mount the controller, plug in and you are good to go. You will not have to run any additional wires. We do carry a replacement mounting bracket # P7685 if you are in need.
    view full answer...
  • Plug In Wiring Adapter For Prodigy P2 Brake Controller in 1999 Dodge Ram 2500
    There is a plug-in adapter for the Tekonsha Prodigy P2 Trailer Brake Controller # 90885 to plug it into your 1999 Dodge Ram 2500, which is the following part: - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dodge # 3020-P For a replacement mount if needed, you can use the Replacement Mounting Bracket for Tekonsha Prodigy and P2 # P7685. Or if you are going to be using the P2 in both vehicles, you can simply add the Mounting Pocket # 7686 to your Ram.
    view full answer...
  • Replacement Mounting Bracket for Prodigy Brake Controller
    The correct replacement mounting bracket you need for your Prodigy brake controller part # 90185 is the part # P7685.
    view full answer...
  • Replacement Mounting Bracket for a Tekonsha Prodigy Brake Controllers
    No need for measurements. Replacement mounting bracket # P7685 is the correct replacement for the the Prodigy and Prodigy P2 (# 90885) brake controllers. It is the exact same bracket that comes with the controllers.
    view full answer...
  • Wiring Harness and Mounting Bracket for a Prodigy Brake Controller and a 2005 Chevrolet Suburban
    The wiring harness that you will want for your Prodigy brake controller and your 2005 Chevrolet Suburban Z71 is part # 3015-P. For a mounting bracket, you can use part # P7685. You can also use part # 7686, if you plan on removing the brake controller from the truck frequently. I have attached an installation video of the Prodigy on a 2004 Suburban for you to check out. The installation will be the same on your 2005 model. The factory brake controller port is located under the driver's...
    view full answer...
  • Harness for Tekonsha Prodigy P2 or P3 Brake Controller for 2019 Chrysler Pacifica With Factory 7-Way
    You can absolutely just get the wiring harness for the Tekonsha Prodigy, Prodigy P2 # 90885 or P3 # 90195 brake controller to install it in your 2019 Chrysler Pacifica with the factory 7-way. The only thing you will need is the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # TK93VR. Since you are transferring the brake controller, you may need a new mount as well. For that we have the Replacement Mounting Bracket for Tekonsha Prodigy and P2 # P7685, or the Replacement...
    view full answer...
  • Recommended Brake Controller Wiring Adapter for Tekonsha Prodigy P2
    Great news. We've had a previous customer ask a similar question to yours and in doing so we found that the provided brake controller harness for your 2016 Acura MDX with the tow package will require you make a few connections to the supplied wiring harness. If that harness was used to install the brake controller on the Jeep Grand Cherokee Overland then you can get a new one right here, the part number is # 7894. You will want to wire the # 7894 harness to the factory harness by function....
    view full answer...
    Image 1 for
  • Parts Needed to Use Prodigy P2 Brake Controller in 2004 Toyota Tundra and 2011 Chevrolet Silverado
    In the 2004 Toyota Tundra it is that easy since you have the tow package. You'll need the Prodigy P2 # 90885 and the wiring harness # 3040-P that plugs into the connector under the dash. I've linked a video of the install. The 2011 Chevrolet Silverado 1500 requires a little more but still not too much. Whether you have the tow package or not there isn't a connector under the dash. But the wiring is already there to hardwire in the P2. Use a circuit tester, # PTW2993, to test each...
    view full answer...
  • Metal Mounting Bracket for P3 Brake Controller # 90195
    For a metal mounting bracket that can be used with the P3 brake controller # 90195 you can use replacement bracket # 2178. Or you can use Replacement Mounting Bracket Kit # TK5906. If you need just the small metal bracket that attaches to the top of the plastic bracket it is # TK5904.
    view full answer...
  • Parts Needed to Add Electric Drum Brakes to a 2003 Haulmark Trailer
    The first thing you are going to want to check is if the trailer axle has brake mounting flanges to attach brake assemblies to. A brake mounting flange will look like # 4-44-1 or # 4-34. If the trailer does NOT have these they will have to be welded on by a qualified professional with experience with installing flanges. It requires a special jig because the flanges have to be perfectly straight and concentric. You will also need the brake assemblies like you said, hub/drum assemblies,...
    view full answer...
  • Availability of Extra Tekonsha Brake Controller Installation Harness for Second Vehicle
    If you need just an extra 4-wire pigtail harness for your Prodigy P2 Brake Controller # 90885 to enable it to be swapped back and forth between the two vehicles, you can use part # 20127. This type of pigtail harness allows hardwired installation in just about any vehicle. You'll also was either a new mounting bracket # P7685 or a pocket mount # 7686. Some trucks and other vehicles have a quick-connect port under the dash (or behind a kick panel) to allow the P2 to just plug in without...
    view full answer...
  • What Parts Are Needed To Swap a Tekonsha Prodigy Trailer Brake Controller To a 2023 GMC Yukon?
    The same Tekonsha Plug-In Wiring Adapter # 3016 which fits your 2018 Chevrolet Tahoe can be used on your 2023 GMC Yukon. We do have the mounting brackets for the Prodigy # P7685, Prodigy P2 # 7686 and Prodigy P3 # TK5906 brake controllers which will make swapping the controller from vehicle to vehicle easier.
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee John H
Expert Research:
John H
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<