Replacement 1/2" Hardened Washer for Reese Weight Distribution Systems

See what our Experts say about this Reese Accessories and Parts

• Replacement Rivet Pin for Draw-Tite Weight Distribution System Head
  I believe what you are needing is the Replacement Weight Distribution Pin # 3305. This is the pin/rivet that helps to control the angle of the weight distribution head. It is designed for Draw-Tite and Reese systems so it will work perfectly for you. If you are needing the washers as well we do have the replacement part with # 3306.
  view full answer...
• What Size Are The Spacer Washers For The Pro Series Weight Distribution System?
  The spacer washers you mention, for your Pro Series Weight Distribution System # PS49901 (NLA), are 1/2", and have an outer diameter of 1". We do carry them, and you can get them here # 3306. If you also need a replacement pin, you can get it here # 3305.
  view full answer...
• Replacement Tilt-Adjustment Rivet and Washers for Draw-Tite Round Bar Weight Distribution System
  I believe you are describing the # 3305 weight distribution system pin that carries the hardened washers that control the tilt of the w/d head. The washers are part # 3306. You can see this in the diagram I provided.
  view full answer...
  
• Installation Instructions on Front and Rear TorkLift Custom Frame Mounted Camper Tie Downs
  The TorkLift tie downs # TLT2309 and # TLT3306 installation instructions will be included. I went to our warehouse to look inside the box and instructions are included. See the picture I included on part # TLT2309.
  view full answer...
  
• Available Tie Downs for a 2017 Toyota Tundra
  We do have a few options for you to add camper tie downs to your 2017 Toyota Tundra, but it depends on some of the specifics for your truck. Since you have the running boards that go to the cab and an OEM hitch I have narrowed down your options to the following: Double Cab - 4WD - 6.5' bed - Front Steel Tie Downs # TLT2310, Rear Steel Tie Downs # TLT3306 Crew Max - 4X2 - 5.5' bed - Rear Steel Tie Downs # TLT3306 Crew Max - 4WD - 5.5' bed - Rear Steel Tie Downs # TLT3306 If you have any...
  view full answer...
• Replacement Washers To Adjust Hitch Head Angle Of Reese Pro Weight Distribution Hitch RE44FR
  I reached out to my contact at Reese and the Replacement 1/2" Hardened Washer for Reese Weight Distribution Systems # 3306 you were looking at are the correct washers to adjust the hitch ball angle on your Reese Pro Round Bar Weight Distribution w Sway Control # RE44FR. I included a video of the # RE44FR for you to take a look at.
  view full answer...
• Are There HappiJac Truck-Mounted Camper Tie-Downs for a 2015 Toyota Tundra CrewMax
  I do have an option for camper tie-downs that will fit a 2015 Toyota Tundra CrewMax but there are no options from HappiJac. The TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLT2307 and part # TLT3306 are what I recommend which are a better option as they don't require drilling for installation. The TorkLift Basic SpringLoad Turnbuckles part # TLS9000 (Qty. 2) can be used to complete the setup.
  view full answer...
• Front and Rear Truck Bed Camper Brackets for a 2014 Toyota Tundra with Factory Hitch
  It looks like you went through our fit guide to find the camper brackets for your 2014 Toyota Tundra. The front and rear camper tie-down brackets are sold together in our fit guide. You should see two part numbers on the part number line. The first part # TLT2309 is the front brackets and the second part # TLT3306 is the rear brackets. These brackets are designed for trucks without running boards or tube steps and with a factory installed trailer hitch. If you have running boards, no hitch...
  view full answer...
• Recommended Frame Mounted Camper Tie-Downs for a 2019 Toyota Tundra Double Cab Short Bed
  Yes, I checked with TorkLift and can confirm the correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs for your 2019 Toyota Tundra Double Cab with 6-1/2' bed, Factory Hitch, and Running Boards (Stop at Cab) is part # TLT3306 for the rear and part # TLT2310 for the front. If you don't already have turnbuckles then I recommend the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK which are stainless steel so they won't rust.
  view full answer...
• Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2021 Toyota Tundra
  No, the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3304 would not be the correct fit for your 2021 Toyota Tundra. The correct rear tie-downs for your 2021 Toyota Tundra are the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3306. We also have the front tie-downs # TLT2310 and turnbuckles # TLS9529-2-LK available.
  view full answer...
• Camper Tie-Downs for 2021 Toyota Tundra 4x4 Double Cab 6-1/2 Foot Bed & Factory Hitch
  Finding the right tie-downs can be a chore, so it's smart to double check, and we do have the exact camper tie-downs you need for your 2021 Toyota Tundra 4x4 Double Cab with a 6-1/2 foot bed and the factory trailer hitch. I verified with TorkLift for you that the correct tie-downs are the following: - Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT2310 - Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3306 These will be a perfect fit on your Tundra, and the only...
  view full answer...

Do you have a question about this Accessories and Part?