Replacement Washers To Adjust Hitch Head Angle Of Reese Pro Weight Distribution Hitch RE44FR

Question

Question:

I have the Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 11,500 lbs GTW, 1,150 lbs TW and need to add additional washers to adjust my hitch ball angle. Do you sell these washers?

asked by: Mike

0

Expert Reply:

I reached out to my contact at Reese and the Replacement 1/2" Hardened Washer for Reese Weight Distribution Systems # 3306 you were looking at are the correct washers to adjust the hitch ball angle on your Reese Pro Round Bar Weight Distribution w Sway Control # RE44FR.

I included a video of the # RE44FR for you to take a look at.

expert reply by: Samuel C

0

Answer 1

If the teeth have smashed, you'll want to replace those washers. Fastway doesn't offer them as an individual replacement part, but they are included with the #FA92-02-9600 replacement hardware/service kit. Without washers that get a good…

view full answer...

Answer 2

The black washers are called conical tooth washers. The ones that are included with the Curt round bar systems are 3/4 inch so for a replacement you can use #3232. They are sold in quantities of 1.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, welcome back! I recommend the etrailer Electric Trailer Jack #e55ZV. It has the 5,000 lb capacity you're looking for, and the jack can be mounted with the head turned to the side to provide additional clearance for your truck's…

view full answer...

Answer 5

If you have a Reese weight distribution system then we have replacement bolts and washers #58133. The bolts are not stainless steel or chrome. For that you would have to get some locally rated grade 8. If you want just the washers use #58024.

view full answer...

Answer 6

Yes, the conical tooth washer needs to be positioned so that the teeth face the hitch. That is what prevents it from coming loose. Take a look at the video I have linked. At about the 1:50 mark the installers start to put the hardware on to mount the…

view full answer...

Answer 7

The critical elements in finding a replacement vent lid are matching the overall size, the position of the lift arm bracket and the style of the hinge. I was unable to find a part number 20X14058A , but we do have some options that will work for you.…

view full answer...

Answer 8

Part #58024 is one pair of square washers with teeth for Weight Distribution heads.

view full answer...

Answer 9

If the conical washers on your EAZ weight distribution hitch are 3/8" washers, then the Draw-Tite Trailer Hitch Conical Tooth Washers - 3/8" Diameter #01292006-020-01 would work just fine. Since it's just a conical washer you're…

view full answer...

Answer 10

I was able to pull the Reese Conical Toothed Washer #01292-008 from our warehouse and measured the outer diameter at 1-1/4 inches.The inner diameter is 1/2 inch.

view full answer...

Replacement Washers To Adjust Hitch Head Angle Of Reese Pro Weight Distribution Hitch RE44FR

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching